• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1617-1623
• /
• 2020

Objective: This study was conducted to investigate the effects of dietary probiotic blend and liquid feed program at different nutritional densities on growth performance, nutrient digestibility, fecal score of weaning piglets. Methods: A total of 120 weaning pigs with an initial body weight of 7.05±0.93 kg per pig (21 days of age) were randomly allocated into 1 of the following 8 dietary treatments (3 replicates per treatment with 5 pigs per replicate) in a 2×2×2 factorial arrangement (nutrition levels: apparent metabolic energy [AME] = 3,500 kcal/kg, crude protein [CP] = 20% vs AME = 3,400 kcal/kg, CP = 19.42%; feed types:dry vs wet; probiotics levels: 0 mg/kg vs 300 mg/kg). Results: During d 5 to d 15, greater average daily gain (ADG) and average daily feed intake (ADFI) (p<0.05) were observed in probiotics treatments. During d 15 to d 25, gain:feed (G:F) ratio (p<0.05) were significantly improved in probiotics, wet feed and high nutrition diet. Moreover, two interactions i) between nutrition levels and feed types, and ii) between nutrition levels and probiotics were found in G:F ratio. Furthermore, there was a significant positive interaction on G:F among those 3 factors (p<0.05). Overall, increasing ADG, ADFI, and G:F ratio were detected in probiotics treatment significantly (p<0.05). Besides, an obvious reduction on fecal score was observed in probiotics treatment from d 0 to d 5 (p<0.05). There was an interactive effect on fecal score between feed types and nutrition concentrations from d 5 to d 25 (p<0.05). Conclusion: These results indicated that probiotics supplementation could benefit growth performance and reduce the frequency of watery feces. Besides, wet feed program (feed:water = 1:1.25) could improve the G:F. The effect of liquid feed or probiotic could be influenced by dietary nutrition density in weaned piglets. An increased value of G:F was obtained when wet feeding a high nutrition diet (100 kcal higher than NRC 2012 recommendations) was supplemented with probiotics for 15 to 25 days.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.45-51
• /
• 2014

This study was conducted to investigate the feeding effects of total mixed fermentations (TMF) with spent mushroom (Flammuliua velutipes) and wet brewer's grain on estimating the productivity and nutrient utilization of Korean black goats. Four experimental groups were set up with each of the 5 animals for a 30-day feeding trial on growth performance. 12 black goats with regard to nutrient digestibility were allocated to 4 groups of 3 animals each by a latin-square design control group (offered concentrate and rice straw) and 3 treatment groups (TMF with 15% spent mushroom and 25% wet brewer's grain (T1), 10, 30% (T2) and 5, 35% (T3)). The average daily gain (ADG) of the control and T1 treatment groups was higher than that of the T3 treatment group (p<0.05). Dry matter (DM) and organic matter (OM) intake (kg/head) for T1 and T2 treatment groups were significantly higher than those of the control group (p<0.05). The digestibility of DM and OM for the control group (62.39~63.39%) and the T1 treatment group (65.02~65.25%) were significantly higher than those of the T3 treatment group (56.39, 59.01%) (p<0.05). Further, nitrogen retention was significantly higher in the T1 treatment group (p<0.05). Thus, these results conveyed that productivity and nutrient utilization were similar between TMF with spent mushroom and wet brewer's grain and commercial feeds. However, this study also suggested that feed must contain 25~30% spent mushroom due to the fact that the productivity of Korean black goats was decreased by increasing the content of spent mushroom.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1460-1468
• /
• 2003

An experiment was conducted to quantify the flow of soluble non-ammonia nitrogen (SNAN) in the liquid phase of ruminal (RD) and omasal digesta (OD), and to investigate diurnal pattern in SNAN flow in OD. Five ruminally cannulated Finnish-Ayrshire dairy cows in a $5{\times}5$ Latin square design consumed a basal diet of grass silage and barley grain, and that supplemented with four protein feeds (kg/d DM basis) as follows: skimmed milk powder (2.1), wet distiller' solubles (3.0), untreated rapeseed meal (2.1) and treated rapeseed meal (2.1). Ruminal digesta was sampled using a vacuum pump, whereas OD was collected using an omasal sampling system at 1.0 h interval during a 12 h feeding cycle. Both RD and OD were acidified, centrifuged to remove microbes and precipitated with trichloroacetic acid followed by centrifugation. The SNAN fractions (free amino acid (AA), peptide and soluble protein) in RD and OD were assessed using ninhydrin assay. Free AA, peptide and soluble protein averaged 60.0, 89.4 and 2.1 g/d, respectively, for RD, and 81.8, 121.5 and 2.5 g/d, respectively, for OD. Although free AA flow was relatively high, mean peptide flow was quantitatively the most important fraction of SNAN, indicating that degradation of peptide to AA rather than hydrolysis of soluble protein to peptide or deamination may be the most limiting step in rumen proteolysis. Diurnal pattern in flow of peptide including free AA in OD during a 12 h feeding cycle peaked 1 h post-feeding, decreased by 3 h post-feeding and was relatively constant thereafter. Protein supplementation showed higher flow of peptide including free AA immediately after feeding compared with no supplemented diet. There were no differences among protein supplements in diurnal pattern in flow of peptide including free AA in OD.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.33-47
• /
• 1982

To modernize the conventional rice post production technology and reduce grain losses, a transition toward the wet-paddy threshing system has been strongly demanded. The head-feeding type thresher with pneumatic separation has been used dominantly for threshing dried-paddy, but some adverse effects in separation performance for threshing wet-paddy is encounterred. In order to solve the problems, the development of thresher with an additional oscillating sieve to the conventional pneumatic separation has been recommanded. This study was intended to evaluate the separating performance of thresher with oscillating sieve which was attached additionally to the conventional auto-thresher equipped with separation system of blower and suction fan. For different feed rates and rice varieties, wet-and dry-material were tested with threshers attached with and without oscillating sieve. Results of the study are summarized as follows: 1. When the feed rates were 480 and 640 kg/hr, there was no statistically significant difference in power reqirements between the threshers with and without an additional sieve device for both dry-and wet-threshing. However, when the feed rate was 960 kg/hr, power requirements of thresher without sieve were greater for wet-paddy threshing than the thresher with the additional sieve separator by about 20% points. 2. With additional oscillating sieve device, the ratios of total weights of whole grains including grains with branch let and damaged grains to the total output did not show statistical difference among the feed rates. However, with pneumatic separation the ratio was decreased as the level of feed rate increased. 3. The total amount of grains with branchlet (including broken panicle) increased with the moisture content. For both the wet-and dry-material threshing with the additional oscillating sieve, the percent of grains with branchlet to the total output decreased greatly as the feed rate increased. 4. The output of the damaged grains increased as moisture content decreased. Especially, for the dry-paddy threshing, the additional sieve separating device produced more damaged grains than the pneumatic separation at all feed rates. 5. Generally, for dry paddy threshing, the separating performance of the thresher with the additional sieve device was better at all feed rates, showing greater difference with increasing feed rates. 6. Separating losses were greater with the pneumatic than sieve separation for both the wet-and dry-threshing. 7. The overall comparison of separating performance of threshers tested with and without an additional sieve device showed that the former was more effective than the latter for the dry-material threshing. However, for the wet-paddy threshing, the separation performance with a sieve device was better than the pneumatic only when the feed rate was high.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.67-77
• /
• 2011

To classify the relationship between riparian vegetation type and bird habitat, we studied the vegetation and avian species in the three streams(Anyang Stream, Gap Stream, Seom River), located in middle province. Five different vegetation types - Woodland type, Shrub type, Tall and wet grassland type, Low and dry grassland type and Cropland - were identified. The habitats of avian species were highly correlated with vegetation type. Streptopelia orientalis and Hypsipetes amaurotis were found in woodland. Both Paradoxornis webbiana and Phoenicurus auroreus were mainly found in shrub. Tall and wet grassland were preference habitats of Ixobrychus sinensis, Acrocephalus arundinaceus, while, low and dry grassland were occupied by Phasianus colchicus, Falco tinnunculus. Cropland were used as breeding and feeding sites for Egretta alba modesta, Anas poecilorhyncha, Anthus spinoletta. Distribution patterns of avian species were clearly divided by vegetation type and site characteristics in the stream.

• Fisheries and Aquatic Sciences
• /
• v.26 no.8
• /
• pp.482-490
• /
• 2023

Food and feeding habits of Labeobarbus intermedius were studied from the newly constructed Ribb Reservoir, Ethiopia during the dry (December-March) season and wet season (June-August) of 2021. The objective of the study was to determine the diet composition, seasonal variation, and ontogenetic dietary shift in the diets of the dominant cyprinid fish in Ribb Reservoir. In this study, frequency of occurrence and volumetric analysis methods were used to present the results. From a total of 203 fish samples, 132 (65%) guts contained food items. Macrophytes (29.4%), phytoplankton (27.2%), detritus (14.8%), and insects (13.6%) were the major food items in the diets volumetrically. During the dry season, L. intermedius was mainly dependent on phytoplankton (58.2%), insects (15.2%), and zooplankton (13.7%) volumetrically. Whereas, macrophytes (50.3%) and detritus (23.3%) were the dominant food items in the wet season. The frequency occurrence and volumetric contribution of the diets of L. intermedius varied significantly (χ² test, p < 0.05) between seasons. Schoener's diet overlap index revealed a slight ontogenetic dietary shift in the diets of L. intermedius. While insects, nematodes, and zooplankton were the main diets of small-sized L. intermedius, macrophytes and detritus were ingested by large-sized L. intermedius. Generally, L. intermedius fed both plant and animal-origin food items and is considered an omnivorous feeder in Ribb Reservoir.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.769-782
• /
• 2005

Twenty four Holstein steers fed commercial concentrates with rice straw(T1), mixed grass hay(T2), or wet brewer’s grains based TMR ad libitum(T3) were used to investigate the effects of roughage feeding type during the growing and early-fattening periods on growth performance, feed efficiency and carcass characteristics. Growth performance and feed efficiency were investigated during the feeding trial conducted from 6 to 23 mo of age, and carcass characteristics were investigated after slaughter. Body weight at slaughter and daily gains were 751 to 802 kg(mean 782 kg) and 1.064 to 1.159 kg/d(mean 1.122 kg/d), respectively, showing that those for T2 were highest followed by T3. Compared with T1, the daily gain for T2 was improved by 8.9%. The TDN intakes per kg gain were 6.87, 7.17 and 7.15 kg for T1, T3 and T2, respectively, indicating that feed efficiency for T2 was improved(approx. 5%) compared with T1. The feeding treatments did not change dressing percentage(mean 60.8%), back fat thickness(6.68 mm) and rib-eye area(84.0$cm^2$). Neither meat quality characteristics nor physicochemical properties were significantly different among the treatments. However, economic analysis accounting for 882.8, 991.7 and 943.8 thousand won per head for T1, T2 and T3, respectively, indicated that T2 and T3 increased(7-12%) total net income compared with T1. Therefore, it may be concluded that high quality meat of Holstein steers can be produced if they are fattened until 23 mo of age and that feeding mixed grass hay as roughage or TMR containing mainly wet brewer's grains during the growing and early-fattening periods can improve growth performance compared with feeding rice straw.

• Journal of Adhesion and Interface
• /
• v.7 no.3
• /
• pp.26-33
• /
• 2006

Nylon fabrics were corona treated with different current intensity (5, 10, 15, 20 A) and feeding speed (5, 10, 15 m/min). We confirmed the change of nylon fabrics surface using X-ray diffraction apparatus, scanning electron microscopy (SEM) and X-ray photoelectron spectrometer (ESCALAB). And the change of physical properties through measuring the tensile strength, tear strength, bonding and wet bonding strength. Thermosetting reactive polyurethane hot melt adhesive was used in the adhesion of nylon fabrics. Functional groups were introduced on nylon fabric surface by treating the fabrics in air atmosphere with corona discharge, and the result adhesion was improved. Bonding strength of the nylon fabric treated with corona was increased with increasing current intensity and decreasing feeding speed.