• 펄프종이기술
• /
• 제46권4호
• /
• pp.1-10
• /
• 2014

In papermaking industry, inorganic fillers are widely used for the purpose of improving opacity, brightness, printability, uniformity and dimensional stability. They are also useful for production costs and energy savings. In the past, inorganic fillers in papermaking industry only focused on micro-scale but recently, new trials on nano-powdered technology are applying. Even nano-powdered fillers are rapidly utilized for improving the optical and surface properties in coating and surface sizing, there still have some problems in wet-end process due to poor dispersibility and retention. In this study, nano-particled calcium carbonate was produced by milling the PCC and its applicability between micro sized and nano sized calcium carbonated was compared in wet-end process, and finally the sheet properties were evaluated. Nano-PCC was not retained in sheet structure without applying retention system, but with retention system nano-powdered PCC was absorbed on fiber surface with expanding the fiber networks. The application of PAM-bentonite system has resulted in high ash retention and bulky structure for copier paper, and good optical properties in brightness and opacity. However, it required to solve the weakness of low tensile property due to interruption of hydrogen bonding by nano fillers.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.34-34
• /
• 1999

용수 및 원료 사용량 절감, 초지속도 및 생산성 향상을 위한 새로운 wet end 보류시스 템의 탐색과 이의 성공적인 현장적용을 위해서는 가장 경제적인 접근방법을 개발하고 그 효 율성을 단계별로 평가하는 것이 매우 중요하다. 본 발표에서는 이러한 접근법의 하나를 소 개하고자 한다. 각 단위공장에 적합한 보류시스템은 생산지종, 초지조건 및 설비상황에 따라서 독특하게 검토, 선정되어야 한하며, 선정된 시스템의 투입지점과 투입방법 등도 역시 현장조건을 고려 하여 결정되어야만 한다. 이를 위해서는 먼저 현장자료를 수집 검토하여 목표를 설정하고, 실험실적으로 공정에 적합한 보류시스템의 선정 및 최적화 연구를 수행한 후, 현장적용을 실시하는 것이 바람직 하다. 평가항목으로는 일과보류도, 미세분 함량, pH, 탁도, 전기전도도, 농도, 지료의 전하, C COD 등을 설정할 수 있으며, 이 밖의 항목은 조업조건에 따라 추가할 수 있다. 적용 가능한 보류시스뱀의 대상은 광범위하게 설정할 수 있으나 공정구성과 지금까지의 경험을 고려하여 다양한 보류시스템 가운데 적합할 것으로 판단되는 시스템을 선정하고 이 에 대해 실험실적 평가를 진행하는 것이 바람직하다. 실험실적 보류시스템의 비교평가 시에 는 보류도, 탁도, 여수도 및 수초지의 물성평가를 병행할 필요가 있다. 선정된 보류향상제의 투입위치 선정을 위해서는 교반속도의 영향을 분석할 필요가 있으며, 추가적으로 예상되는 기타 첨가제 및 원료의 절감효과를 미리 검토하는 것도 새로운 기술의 성공을 위한 좋은 촉 진제가 될 수 있다. 선정된 보류 시스템의 효과가 실험실적으로 입증되면 보류도 향상에 따라 발생될 수 있 는 물성저하를 극복하기 위한 대안을 모색하는 것이 바람직하다. 실험실적 연구의 최종단계 에서는 항상 공정백수를 이용한 연구를 수행하여 실제공정에서의 적용성을 평가하는 것이 중요하며, 이러한 기본 연구를 바탕으로 면밀한 시산 계획을 수립하고 실행하는 것이 바람 직하다. 본 발표에서는 이러한 접근법을 활용하여 wet end의 최적화를 도모한 경험을 논의코자 한다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.230-248
• /
• 2003

본 연구에서는 제지공정에서의 wet-end 와 dry section 부분을 통합한 모델을 구하고 이를 바탕으로 하여 지종교체 공정의 모델예측제어 방법을 제안하였다. 폐회로 공정 인식기법을 이용하여 state-space 모델을 구한 후 지종교체 제어를 모사한 결과와 실제 제지공장의 지종교체 운전데이터를 비교 분석하였다. 입력 변수로서 이전까지는 간과되어 왔던 4가지 변수(thick stock, filler flow, speed, steam pressure), 그리고 출력변수로서 3가지 변수(basis weight, ash content, moisture content)를 고려하였으며, output trajectory는 1차 전달함수 형식으로 하여 적용하였다. 모델예측제어 모사결과를 지종교체 운전데이터와 비교하여 본 결과 지종교체 시간이 짧아지고 보다 안정적으로 정상상태에 이르는 것을 확인할 수 있었다. 아울러 모델예측제어로 인하여 지종교체 이후 입력 변수들이 큰 진동이 없이 보다 신속하게 정상상태에 도달함을 확인하였다.

• 대한이식학회지
• /
• 제28권3호
• /
• pp.154-159
• /
• 2014

Background: Lung transplantation (LTx) is a life-saving treatment for patients with end-stage lung disease; however, the shortage of donor lungs has been a major limiting factor to increasing the number of LTx. Growing experience following LTx using donor lungs after cardiac death (DCD) has been promising, although concerns remain. The purpose of this study was to develop a DCD lung harvest model using an ex vivo lung perfusion (EVLP) system and to assess the function of presumably damaged lungs harvested from the DCD donor in pigs. Methods: The 40 kg pigs were randomly divided into the control group with no ischemic lung injury (n=5) and the study group (n=5), which had 1 hour of warm ischemic lung injury after cardiac arrest. Harvested lungs were placed in the EVLP circuit and oxygen capacities (OC), pulmonary vascular resistance (PVR), and peak airway pressure (PAP) were evaluated every hour for 4 hours. At the end of EVLP, specimens were excised for pathologic review and wet/dry ratio. Results: No statistically significant difference in OC (P=0.353), PVR (P=0.951), and PAP (P=0.651) was observed in both groups. Lung injury severity score (control group vs. study group: 0.700±0.303 vs. 0.870±0.130; P=0.230) and wet/dry ratio (control group vs. study group: 5.89±0.97 vs. 6.20±0.57; P=0.560) also showed no statistically significant difference between the groups. Conclusions: The function of DCD lungs assessed using EVLP showed no difference from that of control lungs without ischemic injury; therefore, utilization of DCD lungs can be a new option to decrease the number of deaths on the waiting list.

• 한국산업보건학회지
• /
• 제11권2호
• /
• pp.135-144
• /
• 2001

This study was performed to measure airborne dimethylformamide(DMF), methyl ethyl ketone(MEK) and toluene and their urinary metabolites concentrations and to determine the relationship between airborne and urinary concentration. Airborne samples and their urinary metabolites were measured 98 male workers who work for 8 synthetic leather factories in a portion of Kyoung-In area. Urine samples were collected at end-of-shift to estimate the exposure levels. 1. The concentration of airborne DMF by process was 8.81 ppm for wet-mixing, 15.05 ppm for wet-coating, 6.03 ppm for dry-mixing, 5.58 ppm for dry-coating, 5.37 ppm for printing, and 9.03 ppm for total. There was statistically significant difference by process. Urinary NMF concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were $90.55mg/{\ell}$, $79.80mg/{\ell}$, $39.86mg/{\ell}$, $25.23mg/{\ell}$, and $38.15mg/{\ell}$, respectively, and total geometric mean was $56.24mg/{\ell}$. There was significant difference by process. 2. The concentration of airborne MEK by process was 1.89 ppm for wet-mixing, 1.96 ppm for wet-coating, 10.33 ppm for dry-mixing, 29.24 ppm for dry-coating, 14.98 ppm for printing, and 4.87 ppm for total. There was statistically significant difference by process. Urinary MEK concentrations of wetmixing, wet-coating, dry-mixing, dry-coating and printing were $0.93mg/{\ell}$, $0.70mg/{\ell}$, $3.29mg/{\ell}$, $3.29mg/{\ell}$, and $1.06mg/{\ell}$, respectively, and total geometric mean was $1.25mg/{\ell}$. There was statistically significant difference by process. Urinary MEK 3. The concentration of airborne toluene by process was 0.35ppm for wet-mixing, 0.42ppm for wet-coating, 2.95ppm for dry-mixing, 11.67ppm for dry-coating, 4.88ppm for printing, 1.24ppm for total. There was statistically significant difference by process. Urinary hippuric acid concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were 0.24g/g creatinine, 0.21g/g creatinine, 0.34g/g creatinine, 0.52g/g creatinine, and 0.29g/g creatinine, respctively and total geometric mean was 0.28g/g creatinine. There was statistically significant difference by process. 4. No. of exceeded KPEL was 40 workers(40.8%) for DMF(10ppm), 1 worker(1.0%) for MEK(200ppm), and no worker for toluene(100ppm). No. of exceeded KBEI was 62 workers(63.3%) for urinary NMF($40mg/{\ell}$), 29 workers(29.6%) for urinary MEK, 1 worker(1.0%) for urinary hippuric acid. 5. The regression equations were Log(NMF)=0.4094*Log(DMF)+1.3587(r=0.4516) for DMF, Log(MEKU)=0.1859*Log(MEK)-0.0324(r=0.3303) for MEK, Log(HA)=0.2106*Log(Toluene)-0.5685(r=0.4497) for toluene. Synthetic leather factory workers expose to 3 kinds of organic solvents which are DMF, MEK and toluene. Their urinary NMF and MEK levels were higher than their concentration levels through respiratory. It seems that the urinary levels were affected skin absorption for working habit and alcohol intake.

• 융합신호처리학회논문지
• /
• 제5권4호
• /
• pp.281-286
• /
• 2004

FMS, FMC, FA, IMS의 구축에 있어서 최하위 단위인 공작기계의 자동화가 중요하다. 이를 위해서는 공작기계의 공구 감시기능(tool monitoring system)이 수행되어야 한다. 본 논문은 공구 감시기능의 자동화를 위해 종전의 공구마모 검출방법과는 달리 엔드밀의 마모상태에 따라 발생하는 절삭음의 음향주파수 분석을 통해 마모정도를 검출하는 방법을 제안하였다. 즉, 머시닝센터에서 공구마모가 잘되는 합금공구강재를 사용하고 이때 발생하게 되는 절삭음(cutting sound)을 음향 분석하여 공구 마모와 관련이 있는 가진 주파수(tooth passing frequency)를 찾아내고 또한 이 주파수의 크기 값과 공구마모(flank wear) 변화를 연구하여 엔드밀의 마모 상태를 추정하였다 이를 위해 본 연구에서는 실험 장비를 구성하고 절삭속도, 엔드밀마모, 공구직경을 절삭조건으로 하여 측정된 절삭음을 FFT 처리하였다. 또한 측정된 값을 회귀분석으로 모델링한 결과 엔드밀 마모 검출오차범위가 5.8% 이내로 나타나 음향주파수 분석에 의한 엔드밀 마모검출 방법의 유효성을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제2권1호
• /
• pp.3-18
• /
• 1974

The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product and manufactured using mordern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc., which would develop after processing,:and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as oak, ramin and meranti which are used in large quantity for manufacturing exporting wood products have been studied. The results of the research are summarized as follows. (1) The end checks and the time for drying from initial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as follows: (2) The kiln dried results, for 30mm stock, which are presented by using kiln schedule table 3 are as follows: (3) The kiln schedules for ramin, meranti and oak are given respectively as follows: Ramin kiln schedule: Table 17 and Table 18. Meranti schedule : Table 12. Oak schedule : Table 15.

• 대한한방소아과학회지
• /
• 제19권1호
• /
• pp.103-115
• /
• 2005

Objectives : Nocturnal enuresis is common disorder in children and has important negative effects on the self-image and performance of children. Thus Successful treatment needed to increase self-esteem. Many studies of this symptoms were reported. But electro-acupuncture treatment not reported in Korea. Methods : We treated three cases enuretic children with different types. Their diagnosis were non-monosymptomatic primary, monosymptomatic primary, monosymptomatic secondary nocturnal enuresis. We used electro-acupuncture on Zhongji(CV3), Guanyuan(CV4) for 20 min. To investigate relapse. at least for 4 months after the end of the therapy we followed-up by telephone. Results : After treatment, diurnal urinary symptoms, such as increased frequency of urination, urgency, incontinence were dramatically improved. And the number of wet night decreased with nocturia and delayed wetting time. Compared to pre-treatment, findings, the number of wet nights decreased 80% or more. Conclusion : All of them tolerated electro-acupuncture well and kept reduction at least for 4 months follow-up. Further study is needed with more cases.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.18-25
• /
• 2003

The adsorption of co-cationic dual polymer system was investigated as was the fiber dispersion stability of a paper stock suspension. Polyaluminum chloride(PAC) and polyamidoamine epichlorohy-drin(PAE) polymers were used as wet-end additives. The adsorbed amounts of PAE polymer in a wet stock were measured by using polyelectrolytic PCD titration. The sheet forming experiments were carried out in a standard handsheet machine. Fiber dispersion stability and relative retention were evaluated in terms of M/K non-uniformity index and sheet basis weight, respectively. The PAE polymer adsorption of Langmuir-isothermal type decreased with increasing PAC addition level. The combination of the two cationic polymers presumably exerts a site-blocking effect by the low molecular weight PAC which gives a partial charge neutralization at a minimum level of addition. From a thermodynamic view point of PAE adsorption, an increase in adsorption entropy and a decrease in train number suggests that the PAR polymer has an extended conformation structure that potentially leads to an enhancement of the fiber dispersion stability. This conclusion is supported by handsheet experiments that examined the PAC-PAE dual polymer effects on the sheet formation and retention.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.47-53
• /
• 2010

It is important to utilize the citrus sludge in terms of the reuse of waste materials in the manufacture of corrugated medium. Especially, the mandarin industry occupies the first place in Jeju province. In this paper, the application of citrus sludge mixed with KOCC recycled fibers into the manufacture of corrugated medium was studied. The citrus sludge was acidic in pH value. Also, the constituents of citrus sludge contain some short fibers, fines, and mucus which contain flavonoids, pectins and so on. In papermaking application, these components cause some troubles like foams, bad smell, fouling on the paper machine, and bad drainage and web breaks of wet web. The strength properties of handsheets prepared from KOCC and citrus sludge was decreased, compare to handsheets made of only KOCC. To compensate the problems on strength properties, some kinds of additives were tried to apply into papermaking wet-end system in laboratory scale. As a result, mixing conditions of alum, starch and anionic additives showed the best options in the recovery of strength properties and formations of corrugated medium.