• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 말뚝기초 국제 학술발표회 논문집
• /
• pp.77-108
• /
• 1996

• 천문학회보
• /
• 제37권2호
• /
• pp.63-63
• /
• 2012

The Square Kilometre Array (SKA) will be the world's largest and most sensitive radio telescope. It will address a wide range of fundamental questions in physics, astrophysics, cosmology and astrobiology. Australia, one of the two countries selected to host the SKA, has spent several years preparing by opening up the Murchison Radio-astronomy Observatory (MRO) as a uniquely radio quiet site in Western Australia, and by constructing the world's most powerful radio survey telescope, the Australian SKA Pathfinder (ASKAP). The SKA will be built in two phases. Phase I will include ASKAP, which will use novel phased-array feeds and grow to become "SKA-survey". Phase I will also include a dish array ("SKA-mid") in South Africa and a low-frequency array ("SKA-low") in Australia, and is slated for operation from about 2020. Phase II of the SKA will consist of further expansion of SKA-low and SKA-mid and is due for completion in the middle of the next decade.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.29-48
• /
• 2011

Under large storm loads sections of a long pipeline on the seabed can be uplifted. Numerically this loss of contact is extremely difficult to simulate, but accounting for uplift and any subsequent recontact behaviour is a critical component in pipeline on-bottom stability analysis. A simple method numerically accounting for this uplift and reattachment, while utilising efficient force-resultant models, is provided in this paper. While force-resultant models use a plasticity framework to directly relate the resultant forces on a segment of pipe to the corresponding displacement, their historical development has concentrated on precisely modelling increasing capacity with penetration. In this paper, the emphasis is placed on the description of loss of penetration during uplifting, modelled by 'strain-softening' of the force-resultant yield surface. The proposed method employs uplift and reattachment criteria to determine the pipe uplift and recontact. The pipe node is allowed to become free, and therefore, the resistance to the applied hydrodynamic loads to be redistributed along the pipeline. Without these criteria, a localised failure will be produced and the numerical program will terminate due to singular stiffness matrix. The proposed approach is verified with geotechnical centrifuge results. To further demonstrate the practicability of the proposed method, a computational example of a 1245 m long pipeline subjected to a large storm in conditions typical of offshore North-West Australia is discussed.

• Journal of Trauma and Injury
• /
• 제35권2호
• /
• pp.71-75
• /
• 2022

Trauma care is evolving throughout the world to meet the demand resulting from rapidly increasing rates of mortality and morbidity related to external injuries. The State Major Trauma Service was designated to Royal Perth Hospital in 2004 to provide comprehensive care for trauma patients in Western Australia (WA), which is the largest state by area in the country. The State Major Trauma Unit, which was established in 2008, functions as a level I center and admits over 1,000 major trauma patients per year, making it the second busiest trauma center in Australia. The importance of recording data related to trauma was identified by the trauma service in WA to inspire higher standards of patient care and injury prevention. In 1994, the service established a trauma registry, which has undergone significant changes over the last two decades. The current State Trauma Registry is linked to a statewide database called the Data Linkage System. The linked data are available for policy development, quality assurance, and research. This article discusses the evolution of the trauma service and the registry database in the WA health system. The State Trauma Registry has enormous potential to contribute to research and quality improvement studies along with its ability to link with other databases.

• 자원환경지질
• /
• 제43권5호
• /
• pp.429-441
• /
• 2010

호주 Yilgarn Craton의 동부 Laverton Tectonic Zone에 위치하는 Sunrise Dam 금광은 서호주에서 지난 10년간 두번째로 가장 많은 금을 생산한 광산이다. 광상 주변의 지질은 화산암류와 이들의 상부에 산출하는 저탁 퇴적암류 그리고 이들을 관입하여 산출하는 시생대 및 원생대 석영섬록암 및 암맥류 등으로 구성된다. 이들 암석들은 북북동 방향의 비대칭 Spartan 배사를 이루고 있으며, 광상은 본 배사의 서쪽 날개부에 발달된 북동-남서 방향의 전단대를 따라 배태된 20여개의 광체로 구성되어 있다. 본 광상은 광물조합 등에 의하여 확실하게 구분되는 5개의 열수광화시기 ($D_1$, $D_2$, $D_3$, $D_4a$, $D_4b$)로 구분된다. 이들 열수광화시기 중 금 광화작용이 가장 우세하게 진행된 시기는 $D_4a$열수광화기이며, $D_4b$열수광화기에 그 다음으로 우세한 금 광화작용이 야기되었다. 이들 열수광화시기의 금 광화작용은 주로 황철석 및 사면동석의 침전과 밀접하게 관련되어 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.518-520
• /
• 2001

해외사례의 다양한 송전가격방식 중 장기 평균비용방식을 채택하고 있는 호주에 대하여 많은 관심이 집중되고 있는 현 시점에 호주 Western Power 회사의 송전요금체제는 우리에게 적지 않은 도움이 될 수 있다고 사료된다. 본 연구는 송전가격 결정에 있어서 중요한 역할을 하는 필요수입액의 산정과정과 산정방법, 그리고 비용할당방법들을 고찰함으로써 장차 우리나라의 송전가격 체계 분석 및 연구에 일조를 하고자 한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.199-200
• /
• 2002

Three-body abrasive wear resistance of mild steel, low alloy steel (Bisalloy) and 27%Cr white cast iron was investigated using a ball-cratering test. Glass beads, silica sand, quartz and alumina abrasive particles with sizes larger than $100{\mu}m$ were used to make slurries. It was found that the wear rates of all three materials tested increased with time when angular abrasive particles were used and were rather constant when round particles were used. This increase in wear rates was mainly due to the gradual increase in ball surface roughness with testing time. Abrasive particles with higher angularity caused higher ball surface roughness. Mild steel and Bisalloy were more affected by this ball surface roughness changes than the hard white cast iron. Generally, three-body rolling wear dominated. The contribution of two-body grooving wear increased when the ball roughness was significant. More grooves were found when round particles were used or the size of the particles was decreased.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.571-582
• /
• 1998

Testing of steel roof purlins is usually performed on full scale models in large vacuum test rigs. To undertake a comparison between web cleat connected purlins and flange bolted purlins a series of tests were performed on a 1:4 small scale model vacuum test rig. Various modelling issues need to be addressed to ensure reasonable comparison with actual constructed roof framing methods but still be suitable for an economical comparison between the connection methods. Model test results were supported by, and found to be in reasonable agreement with, deflection predictions from computer models based on finite element methods. This paper discusses the testing methods adopted and the value of small scale model testing programs as a means of obtaining comparisons between framing options.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.229-235
• /
• 2003

We designed a family of completely autonomous mobile robots with local intelligence. Each robot has a number of on-board sensors, including vision, and does not rely on global positioning systems The on-board embedded controller is sufficient to analyze several low-resolution color images per second. This enables our robots to perform several complex tasks such as navigation, map generation, or providing intelligent group behavior. Not being limited to playing the game of soccer and being completely autonomous, we are also looking at a number of other interesting scenarios. The robots can communicate with each other, e.g. for exchanging positions, information about objects or just the local states they are currently in (e.g. sharing their current objectives with other robots in the group). We are particularly interested in the differences between a behavior-based approach versus a traditional control algorithm at this still very low level of action.

• 미술이론과 현장
• /
• 제13호
• /
• pp.157-184
• /
• 2012

This essay examines Jacques Callot's Les Grandes Mis$\grave{e}$res et Malheurs de la Guerre (1633) as a moral meditation on war as catastrophe. It also uses Callot's Miseries to reflect on the nature of catastrophe as such, particularly as "An event producing a subversion of the order or system of things." As such, catastrophe refers less to nature or the natural gone awry, than it does to the abnegation or suspension of moral aspects of human nature. More than a reflection on war as catastrophe, and catastrophe as fundamentally moral, Callot's Miseries are a timeless meditation on aspects of the human condition; or on human beings in what amounts to state of nature-as evidenced in times of disaster. Such reflection, again, does not by itself imply that all war-even when catastrophic-is unnecessary, let alone necessarily unjust. But it does suggest that artistic engagement with war understood as catastrophic, may yield insights into human nature that are as important to human self-understanding as those represented in artistic subject matter that is more quotidian.