• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.204-207
• /
• 2001

An optimization process for the design of groundwater remediation is developed by simultaneously considering the well location and the pumping rate. This process uses two independent models: simulation and optimization model. Groundwater flow and contaminant transport are simulated with MODFLOW and MT3D in simulation model. In optimization model, the location and pumping rate of each well are determined and evaluated by the genetic algorithm. In a homogeneous and symmetric domain, the developed model is tested using sequential pairs for pumping rate of each well, and the model gives more improved result than the model using sequential pairs. In application cases, the suggested optimal design shows that the main location of wells is on the centerline of contaminate distribution. The resulting optimal design also shows that the well with maximum pumping rate is replaced with the further one from the contaminant source along flow direction and that the optimal pumping rate declines when more cleanup time is given. But the optimal pumping rate is not linearly proportional to the cleanup time and the minimum total pumping volume does not coincide with the optimal pumping rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.1951-1972
• /
• 2018

Wi-Fi Access Point (AP) optimization approaches are used in indoor positioning systems for signal coverage enhancement, as well as positioning precision improvement. Although the huge power consumption of the AP optimization forms a serious problem due to the signal coverage requirement for large-scale indoor environment, the conventional approaches treat the problem of power consumption independent from the design of indoor positioning systems. This paper proposes a new Fast Water-filling algorithm Group Power Constraint (FWA-GPC) based Wi-Fi AP optimization approach for indoor positioning in which the power consumed by the AP optimization is significantly considered. This paper has three contributions. First, it is not restricted to conventional concept of one AP for one candidate AP location, but considered spare APs once the active APs break off. Second, it utilizes the concept of water-filling model from adaptive channel power allocation to calculate the number of APs for each candidate AP location by maximizing the location fingerprint discrimination. Third, it uses a fast version, namely Fast Water-filling algorithm, to search for the optimal solution efficiently. The experimental results conducted in two typical indoor Wi-Fi environments prove that the proposed FWA-GPC performs better than the conventional AP optimization approaches.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1558-1565
• /
• 2004

It is important to determine supporting locations for structural stability when a structure is loaded with non-uniform load or supporting locations as well as the number of the supporting structures are restricted by the problem of space. Moreover, the supporting location optimization of complex structure in real world is frequently faced with discontinuous design space. Therefore, the traditional optimization methods based on derivative are not suitable Whereas, Genetic Algorithm (CA) based on stochastic search technique is a very robust and general method. The KSTAR in-vessel control coil installed in vacuum vessel is loaded with non- uniform electro-magnetic load and supporting locations are restricted by the problem of space. This paper shows the supporting location optimization for structural stability of the in-vessel control coil. Optimization has been performed by means of a developed program. It consists of a Finite Element Analysis interfaced with a Genetic Algorithm. In addition, this paper presents an algorithm to find an optimum solution in discontinuous space using continuous design variables.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.42-46
• /
• 2004

Mobile IP [9] was introduced to help the mobile user to be contacted with a single IP address even though the point-of-access changes. However, mobile IP creates the so-called 'triangle routing' which makes the delays for data packets longer, as well as creating unnecessary traffic at the home network of the mobile user. To overcome this, Route Optimization (RO) for mobile IP [1] was proposed, which eliminated the triangle routing phenomenon. But [l] requires that the network protocol stack of all existing hosts to change. Privacy is also another matter to be considered. This paper introduces a scheme called Peer Agent scheme to implement RO for mobile IP without requiring existing hosts to change. Method to preserve location privacy while still enabling RO is also considered.

• Korean Management Science Review
• /
• v.26 no.3
• /
• pp.23-35
• /
• 2009

This study deals with the location management in WCDMA (Wideband Code Division Multiple Access) networks. The new location management method is the one of the many techniques used to provide the packet switched (PS) services effectively in WCDMA networks. WCDMA introduces RA (routing area) for the PS services in addition to LA (location area) for the circuit switched (CS) services. WCDMA system also adopts the cooperative paging and the combined area update which are to decrease signaling traffic using the PS network resources for the CS services. Considering the characteristics of the WCDMA networks, this study formulate into the mathematical programming problem for the location management. Rather than the existing researches which consider the single MSC/SGSN networks, we deal with the multi MSC/SGSN networks, where both MSC area and SGSN area should be determined as well. Fairness between traffic loads of MSC/SGSN and the system cost incurred to MSC/SGSN are also incorporated into our model, which make the model more realistic. We propose greedy algorithms for the problems, which consists of the merger of two neighboring areas and the movement of an area. Extensive experiment has been done based on the realistic problem examples. Followed by the analysis of parameter effect on the final solutions and the quality of final solutions obtained by our greedy algorithms. Our proposed model and analysis result can be used to determine WCDMA system areas and to predict the system performance measures by the determination.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.220-234
• /
• 2008

In many security monitoring contexts, the performance or efficiency of surveillance sensors/networks based on a single sensor type may be limited by environmental conditions, like illumination change. It is well known that different modes of sensors can be complementary, compensating for failures or limitations of individual sensor types. From a location analysis and modeling perspective, a challenge is how to locate different modes of sensors to support security monitoring. A coverage-based optimization model is proposed as a way to simultaneously site k different sensor types. This model considers common coverage among different sensor types as well as overlapping coverage for individual sensor types. The developed model is used to site sensors in an urban area. Computational results show that common and overlapping coverage can be modeled simultaneously, and a rich set of solutions exists reflecting the tradeoff between common and overlapping coverage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1806-1813
• /
• 2002

It is well known that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. To identify the location and depth of a crack in a structure, a classical optimization technique was adopted by previous researchers. That technique overcame the difficulty of finding the intersection point of the superposed contours that correspond to the eigenfrequency caused by the crack presence. However, it is hard to select a trial solution initially for optimization because the defined objective function is heavily multimodal. A method is presented in this paper, which uses continuous evolutionary algorithms(CEAs). CEAs are effective for solving inverse problems and implemented on PC clusters to shorten calculation time. With finite element model of the structure to calculate eigenfrequencies, it is possible to formulate the inverse problem in optimization format. CEAs are used to identify the crack location and depth minimizing the difference from the measured frequencies. We have tried this new idea on a simple beam structure and the results are promising with high parallel efficiency over about 94%.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3750-3757
• /
• 2024

Rapidly obtaining the coverage characteristics of leaching solution in In-situ Leaching Area of Sandstone Uranium Mines is a necessary condition for optimizing well locations reasonably. In the presented study, the improved algorithm of the Fast Marching Method (FMM) was studied for rapidly solving coverage characteristics to replace the groundwater numerical simulator. First, the effectiveness of the FMM was verified by simulating diffusion characteristics of the leaching solution in In-situ Leaching Area. Second, based on the radial flow pressure equation and the interaction mechanism of the front diffusion of production and injection well flow field, an improved FMM which is suitable for In-situ Leaching Mining, was developed to achieve the co-simulation of production and injection well. Finally, the improved algorithm was applied to engineering practice to guide the design and production. The results show that the improved algorithm can efficiently solve the coverage characteristics of leaching solution, which is consistent with those obtained from traditional numerical simulators. In engineering practice, the improved FMM can be used to rapidly analyze the leaching process, delineate Leaching Blind Spots, and evaluate the rationality of well pattern layout. Furthermore, it can help to achieve iterative optimization and rapid decision-making of production and injection well locations under largescale mining area models.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.369-375
• /
• 2017

This study suggests PSO(Particle Swarm Optimization) algorithm that optimizes the snowplow route allocation and the location of the snow control material storage to improve the efficiency in snow removal works. The modified PSO algorithm for improving the search capacity is proposed, and this study suggests the solution representation, the parameter setting, and the fitness function for the given optimization problems. Computational experiments in real-world case are carried out to justify the proposed method and compared with the traditional PSO algorithms. The results show that the proposed algorithms can find the better solution than the traditional PSO algorithms by searching for the wider solution space without falling into the local optima. The finding of this study is efficiently employed to solve the optimization of the snowplow route allocation by minimizing the workload of each snowplow to search the location of the snow control material storage as well.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.129-145
• /
• 2020

In typical, structural topology optimization plays a significant role to both increase stiffness and save mass of structures in the resulting design. This study contributes to a new numerical approach of topologically optimal design of Mindlin-Reissner plates considering Winkler foundation and mathematical formulations of multi-directional variable thickness of the plate by using multi-materials. While achieving optimal multi-material topologies of the plate with multi-directional variable thickness, the weight information of structures in terms of effective utilization of the material at the appropriate thickness location may be provided for engineers and designers of structures. Besides, numerical techniques of the well-established mixed interpolation of tensorial components 4 element (MITC4) is utilized to overcome a well-known shear locking problem occurring to thin plate models. The well-founded mathematical formulation of topology optimization problem with variable thickness Mindlin-Reissner plate structures by using multiple materials is derived in detail as one of main achievements of this article. Numerical examples verify that variable thickness Mindlin-Reissner plates on Winkler foundation have a significant effect on topologically optimal multi-material design results.