• 제목/요약/키워드: Weld Length

검색결과 187건 처리시간 0.029초

냉간성형 듀플렉스계 스테인리스강(STS329FLD) 용접접합부 모재 블록전단파단 거동 (Block Shear Behavior of Cold-Formed Duplex Stainless Steel (STS329FLD) Welded Connection with Base Metal Fracture)

  • 황보경;김태수
    • 대한건축학회논문집:구조계
    • /
    • 제35권4호
    • /
    • pp.157-165
    • /
    • 2019
  • Recently, lean duplex stainless steel, STS329FLD with less nickel (reduced to 0.5~1.5%) has been developed as a substitute of austenitic stainless steel (8%~10.5% nickel in STS304) and included in Korean standards (KS). This paper investigates the block shear behavior of cold-formed duplex stainless steel (STS329FLD, nominal plate thickness of 1.5mm) fillet-welded connection with base metal fracture. Main variables are weld lengths in the longitudinal and the transverse directions of applied force ranged from 20mm to 50mm. As a result, specimens failed by typical block shear facture (the combination of gross section tensile fracture and shear fracture or shear yielding) and ultimate strength of the specimens got higher with the increase of weld length. Block shear fracture strengths predicted by current design specifications (KBC2016/AISC2016 and EC3) and existing proposed equations for welded connections by Topkaya, Oosterhof & Driver and Lee et al. were compared with test strengths. KBC2016/AISC2016 and EC3 design specifications underestimated block shear strength of STS329FLD welded connections by on average 24%, 29%, respectively and Oosterhof & Driver, Topkaya and Lee et al's equations overestimated the ultimate strength of the welded connection by the range of 3% to 44%.

건답직파에서 파종심도와 관개조건에 따른 벼 품종들의 출아특성 (Seedling Emergence of Dry -seeded Rice under Different Sowing Depths and Irrigation Regimes)

  • 이변우;명을재
    • 한국작물학회지
    • /
    • 제40권1호
    • /
    • pp.59-68
    • /
    • 1995
  • 건답직파에서 파종심과 파종후 관개에 의하여 경도를 달리한 조건에서 벼 품종들의 출아와 유아 신장 특성을 비교검토하였다. 우리 나라의 재래도, 샤레벼 및 통일계와 일반계 육성품종, 미국, 이태리, 인도 품종 등을 포함한 46개 품종을 공시하였으며, 파종심은 1, 3, 5cm로 하였고, 파종후 계속 관개를 하지 않은 처리와 파종후 14일에 고랑에 관개를 한 처리를 두었다. 실험은 사양토의 야외 포장에서 실시하였으며 파종 다음날에 B9.2mm의 소나기성 강우가 있었고 그 후는 맑은 날이 지속되었다. 실험기간 30일간의 평균지온은 16. 5C 내외였다. 1. 파종후 토양의 경도는 직선적으로 증가하여 파종후 14일에는 2. 5kg/$cm^2$에 달하였으며 무관개구는 이후 계속 증가하여 4kg/$cm^2$에 이르렀고, 관개구는 관계후 0kg/$cm^2$가까이 까지 낮아졌다가 다시 증가하여 파종후 28일 경에는 2.5kg /$cm^2$에 달하였다. 2. 파종심도에 관계없이 출아율은 관개구가 무관개구보다 높았다. 1cm 파종심에서 품종간 출아율의 차이는 관개구에서는 크지 않았으나 무관개구에서는 차이가 컸다. 우리 나라 육성 품종들은 모두 무관개구에서 출아율이 현저히 낮았는데 이는 출아 속도가 느려 토양의 경화가 상당히 진전된 후에 출아하였기 때문이었다. 3cm와 5cm 파종심에서 출아율은 관개구와 무관개구 사이에 고도로 유의한 상관이 있었는데, 우리 나라 육성품종들은 관개 및 무관개 조건에서 모두 낮은 편에 속하였으며 , Italicona-verneco, Chlnsura Boro, Weld Pally 등이 출아가 양호하였다. 3. 1cm 파종심의 무관개구에서 50%출아일수는 8일~30일의 큰 품종간 변이를 보였는데 Italiconaverneco, Chinsura Boro, Tebonet, 다 다조 등이 10일 내외로 가장 빨랐으며 우리 나라 품종들은 모두 20일 이상으로 출아 속도가 느렸다. 출아속도는 1cm 파종심의 무관개구, 3cm와 5cm 파종심의 관개 및 무관개구의 출아율과 고도로 유의한 부의 상관이 있었다. 4. 제2절간장을 제외한 중배축장, 초엽장, 제1절간장 및 불완전엽장은 파종심간에 고도로 유의한 부의 상관이 있어서 낮은 파종심에서 신장이 잘되는 것은 깊은 파종심에서도 신장이 잘되었다. 중배축장은 제1절간장 및 불완전엽장과는 고도로 유의한 상관이 있었으나 초엽장과는 상관이 없었으며, 불완전엽장과 초엽장간에는 높은 상관이 있었다. 5. 3cm 파종심에서 초엽이 지면을 뚫고 추출한 품종은 Italiconaverneco, Chinsura Boro, Weld Pally 뿐이었고, 5cm 파종심에서는 초엽이 지면을 뚫고 출아하는 품종은 없었으며 Chlnsura Boro가 지면하 0.5cm까지 신장하였을 뿐이었다. 3cm 파종에서 불완전엽이 지면을 뚫고 나오는 품종은 우리 나라의 샤레벼들, 다다조, 미국의 건답직파재배 품종 등이었으며 우리 나라 육성종들은 모두 지중에서 신장이 멈추어 제1본엽이 지중에서 추출하였으며, Scm파종심에서 불완전엽이 지면을 뚫고 나오는 품종은 Chinsura Boro뿐이었고 Nato, Labelle, Weld Pally, Italliconaverneco 등도 지면 가까이 까지 신장하였다. 6. 50% 출아일수는 제2절간장을 제외 한 모든 유아 형질의 신장도와 유의한 부의 상관을 보였는데 가장 높은 상관을 보인 것은 중배축장+제1절간장+불완전옆장이었으며, 다음이 불완전엽장이 었다. 7. 출아율은 중배축장+제1절간장+불완전엽장, 중배축장+초엽 장과 모든 파종심에서 높은 정의 상관을 보여 제1본엽의 추출 위치가 높을수록 출아에 유리하였다, 유아 형질별로 보면 3cm와 5cm 파종심 의 관개구에서는 불완전엽장과의 상관이 가장 높고, 다음이 초엽장, 중배축장의 순으로 높았으나 무관개구에서는 중배축장과의 상관이 가장 높고 다음이 제1절간장, 불완전엽장의 순으로 상관이 높았고 초엽장은 상관이 낮아 토양에 토막이 생기거나 경화되는 조건에서는 중배축과 제1절간이 잘 신장하는 품종이 추출력이 높아 출아에 유리한 것으로 판단되었다.

  • PDF

고내구성을 위한 강바닥판교의 실험 및 해석 연구 (A Study on Experiment and Structural Analysis for High-Durability of Orthotropic Steel Deck Bridge)

  • 공병승;김민호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.462-467
    • /
    • 2007
  • From the research which it sees verification of the whole interpretation and local interpretation of the durability steel deck bridge a static test and it produces the test body which it sells with character and it executes smallness pul lek detailed interpretation it leads and the appropriate characteristic of smallness pul lek detailed interpretation and to sleep a nominal stress price and it compares it judges it does. The stress quality from each structure region which it follows in load stock location it analyzes and from the hazard which evaluates, the objective region the length rib and the bottom grater weld zone, the length rib and width rib connection department and the width rib with the father it divided. It investigated the stress distribution of the test body from these objective location, FEM interpretation it led and the conduct against each structure state tax it analyzed. General conduct the load stock location the floor plate is located in the center with interpretation price together symmetry characteristic to seem, it cannot be like that it cannot there is one actual test price. Like this reason the length rib and width rib connection actually production even production characteristic security it is a day when it is impossible with the curvature junction department which it blows, it follows in examination body deferment condition and form feed with the fact that it is visible a big difference even with error of some it becomes. Consequently for a data and the research which are more accurate it is judged with the fact that the effort which is prudent will be necessary.

  • PDF

Cyclic response and design procedure of a weak-axis cover-plate moment connection

  • Lu, Linfeng;Xu, Yinglu;Zheng, Huixiao;Lim, James B.P.
    • Steel and Composite Structures
    • /
    • 제26권3호
    • /
    • pp.329-345
    • /
    • 2018
  • This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

스테인레스 316L강의 배관용접결함에 대한 유도초음파 특성 평가 (Evaluation of Weld Defects in Stainless Steel 316L Pipe Using Guided Wave)

  • 이진경;이준현
    • 비파괴검사학회지
    • /
    • 제35권1호
    • /
    • pp.46-51
    • /
    • 2015
  • 스테인레스강은 고온, 고압에서 부식에 효과적인 재료로써 액화수소, 가스 등을 저장하는 저장용기 및 고온의 유체들을 이송하는 배관재료로 널리 사용되고 있다. 일반적으로 스테인레스강의 용접은 TIG용접이 이용되어지고 있으며 용접후 용접부위에 발생하는 초기 용접결함 및 사용중 발생하는 열적 피로균열 등이 재료의 신뢰성을 저하하는 요인들로 지적되고 있다. 본 논문에서는 레이저 유도초음파를 이용하여 초기 용접결함에 대한 초음파 특성 규명을 위하여 스테인레스강의 용접부에 인공균열의 크기를 5 mm, 10 mm, 20 mm 길이로 가공후 유도초음파의 결함 길이 변화에 따른 특성을 평가하였다. 배관의 두께 등을 고려하여 L(0,1)모드와 L(0,2)모드를 이용하였으며 각각의 모드가 결함의 길이 변화에 따라 변화를 보였지만 L(0,2)모드가 L(0,1)모드보다 결함 길이에 더욱 민감하게 반응하였다. 본 연구에서는 L(0,1)모드와 L(0,2)모드의 진폭비를 구하여 결함과의 연관성을 평가한 결과 결함 길이와 선형적인 관계를 나타냄으로써 각 모드를 단독적으로 평가하는 것보다는 두 모드의 진폭비를 이용하여 결함을 평가하는 것이 더욱 효과적임을 알 수 있었다.

단순가력실험을 통한 콘크리트충전 강관기둥의 부착응력에 관한 연구 (An Experimental Study on the Bond Strengths for Concrete Filled Steel Tube Columns using a Push-Out Test)

  • 우해성;김진호;최성모
    • 한국강구조학회 논문집
    • /
    • 제14권4호
    • /
    • pp.481-487
    • /
    • 2002
  • 콘크리트충전 강관기둥의 외다이아프램 접합부형식에서, 철골보의 하중이 내부의 콘크리트로 전달되는 하중전달 메카니즘이 아직 명확하게 규명되지 않았다. 여기서 각 층에서 철골보의 전단력은 외부의 강관과 내부의 콘크리트 사이의 부착응력에 의해 전달된다고 본다. 따라서 본 연구는 콘크리트충전 강관기둥의 부착응력을 파악하기 위해, 콘크리트면에만 하중을 가하는 단순가력실험을 실시하였다. 콘크리트 종류, 강관의 형상/길이, 이음부의 유무/뒷댐재의 두께 등을 변수로 총 30개의 실험체를 제작하여 실험을 실시했으며, 각 변수에 따른 실험결과를 비교/분석하고자 했다.

티타늄 판재의 파이버 레이저 용접시 공정변수에 따른 용접특성 (II) - 입열량 제어에 따른 영향 - (Weldability with Process Parameters During Fiber Laser Welding of a Titanium Plate (II) - The Effect of Control of Heat Input on Weldability -)

  • 김종도;김지성
    • 대한기계학회논문집A
    • /
    • 제40권12호
    • /
    • pp.1055-1060
    • /
    • 2016
  • 레이저 용접은 고밀도 용접법 중에 하나로 기존 용접방법에 비해 적은 입열로 깊은 용입과 빠른 용접속도를 얻을 수 있다. 연속 출력 파형 레이저 용접 시 입열량은 레이저 출력 및 용접속도에 의해 결정된다. 본 연구에서는 파이버 레이저를 사용하여 두께 0.5 mm의 순 티타늄 박판에 비드 및 겹치기 용접을 실시하였으며 레이저 출력 및 용접속도에 따른 용접성을 평가하였다. 레이저 출력 및 용접속도에 따른 용입깊이, 비드폭, 접합길이, 비드형상을 관찰하고 인장전단시험을 통해 기계적인 특성을 파악하였다. 실험결과, 겹치기 용접은 $P_L=0.5kW$, ${\nu}=2.5m/min$$P_L=1.5kW$, ${\nu}=6m/min$ 조건에서 양호한 접합길이를 가진 용접부를 얻을 수 있었으며, 용접부는 고출력보다 저출력 조건일 때 더 우수한 연성을 나타냈다.

면내 거셋 용접연결부의 피로강도 (Fatigue Strength of In-plane Welded Attachments)

  • 배두병
    • 한국강구조학회 논문집
    • /
    • 제15권6호통권67호
    • /
    • pp.629-637
    • /
    • 2003
  • 본 논문은 강교량에서 큰 응력범위가 발생하는 위치에 불가피하게 존재하는 가장 일반적인 피로 취약 상세인 면내 거셋 용접부에 대한 3단계에 걸친 피로 시험 결과를 분석 평가 하였다. 플랜지 및 부착물의 두께, 부착물의 길이와 적용강재를 변화시킨 총 57개의 피로 시험편이 제작되어 인장피로시험이 수행되었으며, 1단계 시험에서는 실물크기 및 시험체에 대한 피로 실험도 수행되었다. 실험 결과로부터 현 설계기준에 제시된 대상상세에 대한 피로강도 기준의 적정성을 평가하고, 플랜지와 용접 연결된 부착물의 두께, 길이 등의 기하학적 형상 및 적용강재의 강도가 피로강도에 미치는 영향과 균열의 발생 및 진전 거동 특성을 규명하였다. 외국의 피로실험 자료와 비교 분석한 결과 강재가 서로 달라도 유사한 피로강도를 갖는 것으로 나타났으며, 이는 강종 보다는 기하학적 형상 및 용접관련사항이 피로강도에 미치는 영향이 크다는 것을 나타내며, 형상에 따라 응력집중계수의 차이가 매우 커서 거셋 부착부의 변화부 반경, 길이 및 플랜지의 폭에 따라 상세분류를 좀더 세분화 할 필요가 있는 것으로 나타났다.

Turning Vane Bolt의 이종재(STS316L/IN X-750) 마찰용접에 관하여 (On Dissimilar Friction Welded Joints(STS316L/IN X-750) of Turning Vane Bolt)

  • 신기석;공유식;김선진;류인일
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.331-336
    • /
    • 2004
  • Dissimilar friction welding were produced using 10mm and 11mm diameter solid bar in Inconel ally(IN X-750) to Stainless steel(STS316L) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, Virkers hardness surveys of the bond of area and HAZ and macro-structure investigations. The specimens were tested as welded, not heat-treated. The tensile strength of the friction welded steel bars was increased up to $95\%$ of the STS316L base metal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_1=220(MPa),\;P_2=260(MPa),\;t_1=4(s),\;t_2=4(s)$ when the total upset length is 7(mm).

  • PDF

Pulse TIG welding: Process, Automation and Control

  • Baghel, P.K.;Nagesh, D.S.
    • Journal of Welding and Joining
    • /
    • 제35권1호
    • /
    • pp.43-48
    • /
    • 2017
  • Pulse TIG (Tungsten Inert Gas) welding is often considered the most difficult of all the welding processes commonly used in industry. Because the welder must maintain a short arc length, great care and skill are required to prevent contact between the electrode and the workpiece. Pulse TIG welding is most commonly used to weld thin sections of stainless steel, non-ferrous metals such as aluminum, magnesium and copper alloys. It is significantly slower than most other welding techniques and comparatively more complex and difficult to master as it requires greater welder dexterity than MIG or stick welding. The problems associated with manual TIG welding includes undercutting, tungsten inclusions, porosity, Heat affected zone cracks and also the adverse effect on health of welding gun operator due to amount of tungsten fumes produced during the welding process. This brings the necessity of automation. Hence, In this paper an attempt has been made to build a customerized setup of Pulse TIG welding based on through review of Pulse TIG welding parameters. The cost associated for making automated TIG is found to be low as compared to SPM (Special Purpose machines) available in the market.