• 한국운동역학회지
• /
• 제15권3호
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• 한국운동역학회지
• /
• 제18권2호
• /
• pp.105-114
• /
• 2008

본 연구는 고교여자역도 선수들의 용상동작에서 무게증가에 따른 근전도의 변화를 분석하여 체급별(69kg급, 58kg급)로 나타나는 근 발현양상을 비교하였다. 주동근은 대퇴이두근, 승모근, 척추기립근, 광배근, 비복근, 외측광근 등 6개의 근육을 선정하였으며, 용상동작을 6구간으로 나누어 근전도를 측정하여 다음과 같은 결과를 보였다. 체급별 차이에서 58kg급에서는 모근 근육군과 동작구간에서 무게가 올라갈수록 근육의 발현이 단계적으로 올라가는 양상을 보였다. 체급에 따른 EMG 신호크기에서는 각 근육군마다 그 크기가 서로 다르게 나타나, EMG 신호크기가 체급과 무게에 따라 증가되는 것은 아닌 것으로 나타났다. 본 연구결과로 볼 때 69kg급에서 무게에 따른 근발현이 일관성 없이 나타나는 것으로 미루어 높은 체급일수록 근력과 함께 기술적인 요인도 고려되어야 경기력 향상에 긍정적인 영향을 미칠 것으로 사료된다.

• 대한치과의사협회지
• /
• 제53권9호
• /
• pp.602-609
• /
• 2015

The aim of this document is to evaluate the effect of bite balance on physical fitness and motor capacity to determine the importance of the occlusal stability as a possible action mechanism of occlusal appliance including mouthguards on physical performances. We all remember that day when the prominent athlete was in the news wearing a mouthguard to improve human athletic performance. I once had investigated the determinants of athletic performance in all sorts of sports. Most of the studies had overinterpretation of results and lack of evidence to support the information. However, I discovered great expectations for new possibility in this field and settled for a more academic approach to this intriguing subject. The followings are some examples of the subject 1. Archers who wore occlusal appliances to increase the vertical dimension of occlusion by 2~3mm increased their ability to focus and to maintain good sense of balance. Their accuracy rate has been improved. The appliance was made of acrylic resin (a type of plastic). 2. Canoe players who wore occlusal appliances to increase the vertical dimension of occlusion by 5mm surpassed longtime competitor and won the race with 10 seconds gap. 3. A cycle rider who wore an occlusal appliance to treat his malocclusion surpassed his old record from 10.8 seconds to 10.3 seconds. His muscle reflexes (anaerobic exercise) and endurance (aerobic exercise) has been enhanced. 4. Occlusal appliances had a good effect on athletic performance in most sports such as swimming, diving, and weightlifting. As for the clenching on dentition, people clench their teeth when they push their physical and mental limits during sports activities. Clenching can be induced by physical exertion when maximum muscle strength is retained and this is similarly found in different types of exercises. In addition, restraint of respiratory function is observed. Therefore, creating a occlusal balance with occlusal appliance or mouthguard promoted a favorable influence when an athlete clenches.

• 운동과학
• /
• 제21권2호
• /
• pp.183-190
• /
• 2012

본 연구의 목적은 엘리트 선수들의 에너지 기여비율에 기인된 종목특성에 따른 20 m 셔틀런 검사를 이용한 심페지구력 측정의 유용성을 평가하는데 있다. 본 연구에 참여자는 K 국립체육대학교에 재학중인 학생 67명을 대상으로 하였으며, 종목 특성은 무산소성종목(단거리, 도약, 역도, 투척; 35명), 유산소성 종목(중장거리; 9명), 투기종목(유도; 23명)으로 3집단을 구성하였다. 20 m 셔틀런 검사는 Leger et al.(1982)방법을 이용하였으며, 측정된 셔틀런 횟수를 이용한 가속도 산출은 Brewer et al.(1988) 방법을 이용하였다. 유용성 평가를 위한 VO₂max 준거검사는 트레이드밀을 이용한 점증부하 방법을 실시하였으며, 순발력 체력요인은 제자리멀리뛰기와 50 m 달리기를 이용하였다. 순발력, 민첩성, 근지구력을 고려한 체력요인은 Z-점프를 측정하였다. 종목별 체력특성차이는 제자리멀리뛰기와 50 m 달리기에서 무산소성 집단(Anaerobic Group; AnG)이 유산소성집단(Aerobic Group; AeG)과 투기종목집단(Combat Sport Group; CG)에 비해 유의하게 높았다(p<.05). 하지만 Z-점프는 CG가 AnG와 AeG에 비해 유의하게 높았다(p<.05). 20 m 셔틀런 검사결과와 VO₂max관련성은 AnG(r= 0.577, p<.0001)와 CG(r= 0.760, p<.0001)에서 유의하게 높은 상관계수를 나타내었으나 AeG는 낮은 상관계수를 나타내었다. 20-셔틀런검사의 유용성평가를 위한 집단간 차이는 20 m 셔틀런 검사결과를 VO₂max로 전환하였을 때 집단 간 차이가 없었으며 오차가 감소하는 것을 발견하였다. 우리는 이번 연구에서 20 m 셔틀런 검사의 유용성을 판단하였으며 셔틀런 검사횟수를 이용한 VO₂max 산출에 따른 오차가 감소하는 것으로 나타나 현장 활용적인 측면에서 셔틀런 검사를 종목 구분 없이 보편적으로 이용하기 위해 VO₂max전환의 필요성을 확인할 수 있었다.