• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.321-328
• /
• 2002

From May 1999 to July 2000, concentration of 17 metals (Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sr, V, Zn), 4 ions (${NH_4}^+$, $Cl^-$, ${NO_3}^-$, ${SO_4}^{2-}$) and pH in rainwater were investigated. The volume-weighted mean concentrations (VWM) of ${NO_3}^-$ and ${SO_4}^{2-}$ were 16.0 and $17.0{\mu}mol\;L^{-1}$. The average pH was 4.53, which ranged from 3.83 to 6.06. The characteristic variations of these species were investigated in terms of the source of these species by principal component analysis (PCA) and interelement correlation coefficients. The elements were classified into three categories: anthropogenic source (Cd, Cu, Fe, Ni, Pb, V, Zn, ${NH_4}^+$, ${NO_3}^-$, ${SO_4}^{2-}$ and $H^+$), soil and crust dust (Al, Ba, Ca, Fe, Mn) and sea salts (Mg, Na, $Cl^-$). In addition, we compared the concentrations in rainwater, which were taken on the same day in three sites (Higashi-Hiroshima, an urban-facing area and a mountain-facing area of Mt. Gokurakuji) in order to examine the regional effect against the concentrations in them. At the urban-facing area of Mt. Gokurakuji, the concentrations of chemical compositions were higher than other areas.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.347-353
• /
• 2000

The construction and ability of CAE program are presented. The merit and ability of MATLAB which is widely using in the field of recently engineering and natural science are also introduced. Also, analysis program of frame structure used the MATLAB language which is divide in 4th generation language is presented. In this paper, the proposed program using MATLB language to be based upon the composition of general CAE program is composed to preprocess, solver and post-process procedure. And it is able to carried out the static and eigenvalue analysis of truss structure and two dimensional frame structure. Also, for the sample pre-processing and post-processing, it is used the characteristic of input window and plot window to be made of the various GUI function. Each finite elements to be required for analysis is formulated by the Galerkin's method, as a kind of weighted residual method. For check of the results of calculation for program used in this paper, the results to be calculated using program to be developed by the author was compared with its of ANSYS code for general structural analysis about two dimensional truss and frame structure.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.79-88
• /
• 2015

The safety culture of an organization is the product of individual and group values, attitudes, perceptions, competencies, and patterns of behavior that determine the commitment, the style and proficiency, and an organization's health and safety management. A good safety culture includes effective, appropriate safety management systems; strong safety leadership & commitment from management; participation and involvement of the workforce; and organizational learning and continuous improvement. This paper will introduce the safety culture inspection standards and process in Korea Railway. The main purpose is to get a better understanding of safety culture and to develop measuring tool. First of all we developed the composition factor of safety culture and the question set. And we prepared the base of computerization of safety culture measurement by developing of evaluation standards and weighted value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.226-228
• /
• 2005

Predicting the cellular location of an unknown protein gives valuable information for inferring the possible function of the protein. For more accurate Prediction system, we need a good feature extraction method that transforms the raw sequence data into the numerical feature vector, minimizing information loss. In this paper we propose new methods of extracting underlying features only from the sequence data by computing pairwise sequence alignment scores. In addition, we use composition based features to improve prediction accuracy. To construct an SVM ensemble from separately trained SVM classifiers, we propose specificity based weighted majority voting . The overall prediction accuracy evaluated by the 5-fold cross-validation reached $88.53\%$ for the eukaryotic animal data set. By comparing the prediction accuracy of various feature extraction methods, we could get the biological insight on the location of targeting information. Our numerical experiments confirm that our new feature extraction methods are very useful forpredicting subcellular localization of proteins.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.123-128
• /
• 1989

Calorimetric study in conjunction with Fourier-transform infrared (FTIR) spectroscopic study was carried out on the blends of poly(ethylene oxide) (PEO) with isotactic, atactic and syndiotactic poly(methyl methacrylate) (i-, a-, and s-PMMA). From the differential scanning calorimetric (DSC) measurements, the three types of blends show a depression of the melting temperatures. This indicates that PEO is compatible with i-, a-, and s-PMMA. But the largest melting point depressions of PEO are always found in the blends with s-PMMA. For PEO/a-PMMA and PEO/s-PMMA, the degree of crystallinity as a function of composition deviates substantially from that of the ideal blend in which no interaction between the components exists. The FTIR spectra of all three types of blends are recorded. In order to observe the microstructural changes of PEO in blends, we analyzed the spectra using digital weighted subtraction and addition techniques. It was concluded that the microstructures of PEO are strongly perturbed by the PMMA's. Among these blends PEO microstructure in PEO/s-PMMA blends is most greatly influenced. It indicates that the blending is most preferred with s-PMMA than a- and i-PMMA. It can be explained on the basis of the molecular structure of PMMA's.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.13-25
• /
• 2017

To reconstruct the paleo-temperature quantitatively and to overcome limitation of traditional qualitative pollen analysis, this study was performed pollen analysis using the modern surface soil at Yulha-dong, Gimhae-si of southeastern part of Korean peninsula. Canonical Correspondence Analysis(CCA) was done to identify the most important environment variable about composition of modern surface pollen sample. Also, Weighted Average-Partial Least Square(WA-PLS) was analyzed to obtain modern surface pollen-temperature transfer function. The transfer function was applied to the results of qualitative fossil pollen analysis at Yulha-dong, Gimhae-si, Sampyung-ri, Ulsan-si and Taewha-dong, Ulsan-si. Therefore, the paleo-temperature was reconstructed during the Holocene since 6,200 yr BP. According to the results of the research, it is $1{\sim}2^{\circ}C$ lower than the current average annual temperature at the study area in 6,200 yr BP, since then it increased to the same level to the current temperature and decreased again until 2,600 yr BP. From the 2,600 yr BP, the temperature was fluctuated to the present.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3758-3763
• /
• 2024

The current study aimed to evaluate the suitability of polyester resin as an alternative material to polymethyl methacrylate (PMMA) for computed tomography (CT) dosimetry phantoms using the GEANT4/GATE Monte Carlo simulation platform. Cylindrical phantoms (32 cm diameter) constructed of polyester resin and PMMA were simulated and compared in terms of atomic composition, effective atomic number, electron density, mass density, and photon interaction mechanisms. Weighted CT dose index (CTDIw) values were calculated for each phantom at 80, 110, and 130 kVp tube voltages based on measurements of CTDI_100,c and CTDI_100,p. Results demonstrated that the physical properties of polyester closely matched those of PMMA, and the polyester phantom displayed equivalent dosimetric behavior to the PMMA phantom at all tube voltages tested. CTDIw values from the polyester phantom were within 1.4 % of the PMMA phantom across all tube voltages. Conversion coefficients were derived to equate polyester CTDIw values to PMMA dose equivalents. This study found that a polyester resin phantom exhibited radiation dosimetry commensurate with the standard PMMA phantom for CT dose assessment. Consequently, polyester resin represents a viable substitute material when PMMA is unavailable for construction of CT dosimetry phantoms.

• Korean Journal of Poultry Science
• /
• v.30 no.3
• /
• pp.161-167
• /
• 2003

A study was conducted to investigate the effect of supplementing earthworm meal (EWM) on the performance of laying hens and fatty acid composition in egg yolks. A total of 360 laying hens at 55 weeks of age were fed the experimental diets containing 0.0% (Control), 0.1% and 0.2% of EWM for 5 weeks. Eggs were collected and weighted every day and egg production and feed conversion were recorded every weeks during the experimental period. However fatty acid composition of egg yolk were measured at last week of experimental period. Amount of feed intake tended to increase by supplemental EMW, but feed conversion ratio of birds fed EWM was not different among three groups. Average egg production seemed to increase and significantly improved (P<0.05) when fed a 0.1% EWM and 0.2% EWM, respectively. Average egg weight was prone to decrease when fed a 0.1% EWM compared to that fed a 0% (control) or 0.2% EWM. Average daily egg mass tended to improve by the addition of EWM. It was more increased in 0.2% EWM treatment than 0.1% EWM. The ratio of egg yolk n-6/ n-3 fatty acids contents was 5:1 fed a 0.1% and 0.2% EWM. But these ratio was 10:1 in control group. It is concluded that 0.2% earthworm meal supplementation in the 55 weeks old laying hens diet, improves the laying performance and ratio of egg yolk n-6/ n-3 fatty acids contents (P<0.05).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2007

The issue of acid precipitation and related environmental problems in East Asia has been emerging. To evaluate the acidity and chemical characteristics of rainwater in Korea, its chemical properties during cultivation season from April to October in 2005 were investigated at Taean. Also, to estimate the contribution of ions on acidity, ion composition characteristics and neutralization effects by cations were determined. The electrical conductivity balance between measured and estimated values showed a high correlation. Rainwater was highly distributed in the range of pH $4.5{\sim}5.0$. The acidity of rainwater was relatively low during the month of June compared with other monitored periods. $Na^+$ was the main cation, followed by $H^+>Ca^{2+}>NH_4^+>K^+>Mg^{2+}$. Among these ions, $Na^+,\;NH_4^+,\;Ca^{2+}$ and $H^+$ comprised over 94% of the total cations. Rainwater anion composition was more than 80% with $SO_4^{2-}$ and $NO_3^-$. In rainwater samples, $NH_4^+$ and $Ca^{2+}$ contributed greatly to neutralizing the rain acidity. The sulfate content decreased until September, and sea salt derivatives were higher in May and October than during other monitored periods. Also, 78% of the soluble sulfate in rainwater was nss-$SO_4^{2-}$ (non-sea salt sulfate).

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.818-829
• /
• 2013

The collection of rainwater samples was made at Jeju area during 2009~2010, and the major ionic species were analyzed. In the comparison of ion balance, conductivity, and acid fraction for the validation of analytical data, the correlation coefficients showed a good linear relationship within the range of 0.966~0.990. The volume-weighted mean pH and electric conductivity were 4.9 and $17.8{\mu}S/cm$, respectively, at the Jeju area. The volume-weighted mean concentrations of ionic species in rainwater were in the order of $Cl^-$ > $Na^+$ > $nss-SO_4{^{2-}}$ > $NH_4{^+}$ > $NO_3{^-}$ > $Mg^{2+}$ > $H^+$ > $nss-Ca^{2+}$ > $HCOO^-$ > $K^+$ > $PO_4{^{3-}}$ > $CH_3COO^-$ > $NO_2{^-}$ > $F^-$ > $HCO_3{^-}$ > $CH_3SO_3{^-}$. The ionic strength of rainwater was $0.26{\pm}0.21$ mM during the study period. The composition ratios of ionic species were such as 50.1% for the marine sources ($Na^+$, $Mg^{2+}$, $Cl^-$), 30.9% for the anthropogenic sources ($NH_4{^+}$, $nss-SO_4{^{2-}}$, $NO_3{^-}$), and 4.7% for the soil source ($nss-Ca^{2+}$), and 3.1% for organic acids ($HCOO^-$, $CH_3COO^-$). From the seasonal comparison, the concentrations of $NO_3{^-}$, $nss-Ca^{2+}$, and $nss-SO_4{^{2-}}$ increased in winter and spring seasons, indicating a reasonable possibility of long range transport from Asia continent. Especially, the acidifying contributions by major inorganic acids ($nss-SO_4{^{2-}}$ and $NO_3{^-}$) and organic acids ($HCOO^-$ and $CH_3COO^-$) were 87.6% and 12.4%, respectively. In comparison by sectional inflow pathway of air mass during the rainy sampling days, the concentrations of $nss-SO_4{^{2-}}$ and $NO_3{^-}$ were relatively high when the air mass was moved from the China continent into Jeju area.