• Title/Summary/Keyword: Weight table

Search Result 359, Processing Time 0.027 seconds

Freshness Preserving of Table Grape using Corrugated Paperboard Box Laminated with Functional MA Film (기능성 골판지 상자로 포장한 포도의 신선도 유지효과)

  • 박형우;박종대;김태규;김기정
    • Food Science and Preservation
    • /
    • v.5 no.4
    • /
    • pp.331-334
    • /
    • 1998
  • Weight loss of table Grape packed with control(Corrugated paperboard box), LDPE, CE(MA film masterbatched by ceramic powder treated cemical reagent) and FC box(laminated by CE film pouch) at 25 C after 10 days were 5.6%, 0.4%, 0.6%, and 0.7%, respectively. Weight loss of control was 7.29times higher than that of FC box. Total ascorbic acid content(TAA) of table grape after 10 days was 3.42 mg% for control, was 5.33 for LDPE and 5.14mg% for CE, 4.98mg% for FC. TAA of LDPE and CE showed to higher than that of control, especially TAA of FC was 33% higher than that of control. Titratable acid of LDPE and CE was high compare to control, and acidity of FC was 6% higher than that of control. References in overall appearance of LDPE, CE and FC were better than that of control. Corrugated paperboard box(FC) laminated with functional MA film showed to be able to used as packaging box of table grape.

  • PDF

The Radiation Exposure of Radiographer Related to the Location in C-arm Fluoroscopy-guided Pain Interventions

  • Chang, Young Jae;Kim, Ah Na;Oh, In Su;Woo, Nam Sik;Kim, Hae Kyoung;Kim, Jae Hun
    • The Korean Journal of Pain
    • /
    • v.27 no.2
    • /
    • pp.162-167
    • /
    • 2014
  • Background: Although a physician may be the nearest to the radiation source during C-arm fluoroscope-guided interventions, the radiographer is also near the fluoroscope. We prospectively investigated the radiation exposure of radiographers relative to their location. Methods: The effective dose (ED) was measured with a digital dosimeter on the radiographers' left chest and the side of the table. We observed the location of the radiographers in each procedure related to the mobile support structure of the fluoroscope (Groups A, M and P). Data about age, height, weight, sex, exposure time, radiation absorbed dose (RAD), and the ED at the radiographer's chest and the side of the table was collected. Results: There were 51 cases for Group A, 116 cases for Group M and 144 cases for Group P. No significant differences were noted in the demographic data such as age, height, weight, and male to female ratio, and exposure time, RAD and ED at the side of the table. Group P had the lowest ED ($0.5{\pm}0.8{\mu}Sv$) of all the groups (Group A, $1.6{\pm}2.3{\mu}Sv$; Group M, $1.3{\pm}1.9{\mu}Sv$; P < 0.001). The ED ratio (ED on the radiographer's chest/ED at the side of the table) of Group A was the highest, and the ED radio of Group P was the lowest of all the groups (Group A, $12.2{\pm}21.5%$; Group M, $5.7{\pm}6.5%$; Group P, $2.5{\pm}6.7%$; P < 0.001). Conclusions: Radiographers can easily reduce their radiation exposure by changing their position. Two steps behind the mobile support structure can effectively decrease the exposure of radiographers by about 80%.

Data Source Management using weight table in u-GIS DSMS

  • Kim, Sang-Ki;Baek, Sung-Ha;Lee, Dong-Wook;Chung, Warn-Il;Kim, Gyoung-Bae;Bae, Hae-Young
    • Journal of Korea Spatial Information System Society
    • /
    • v.11 no.2
    • /
    • pp.27-33
    • /
    • 2009
  • The emergences of GeoSensor and researches about GIS have promoted many researches of u-GIS. The disaster application coupled in the u-GIS can apply to monitor accident area and to prevent spread of accident. The application needs the u-GIS DSMS technique to acquire, to process GeoSensor data and to integrate them with GIS data. The u-GIS DSMS must process big and large-volume data stream such as spatial data and multimedia data. Due to the feature of the data stream, in u-GIS DSMS, query processing can be delayed. Moreover, as increasing the input rate of data in the area generating events, the network traffic is increased. To solve this problem, in this paper we describe TRIGGER ACTION clause in CQ on the u-GIS DSMS environment and proposes data source management. Data source weight table controls GES information and incoming data rate. It controls incoming data rate as increasing weight at GES of disaster area. Consequently, it can contribute query processing rate and accuracy

  • PDF

Performance evaluation of suspended ceiling systems using shake table test

  • Ozcelik, Ozgur;Misir, Ibrahim S.;Saridogan, Serhan
    • Structural Engineering and Mechanics
    • /
    • v.58 no.1
    • /
    • pp.121-142
    • /
    • 2016
  • The national standard being used in Turkey for suspended ceiling systems (SCS) regulates material and dimensional properties but does not contain regulations regarding installation instructions which cause substandard applications of SCSs in practice. The lack of installation instructions would potentially affect the dynamic performance of these systems. Also, the vast majority of these systems are manufactured using substandard low-quality materials, and this will inevitably increase SCS related damages during earthquakes. The experimental work presented here focuses on the issue of dynamic performance of SCSs with different types of carrier systems (lay-on and clip-in systems), different weight conditions, and material-workmanship qualities. Moreover, the effects of auxiliary fastening elements, so called seismic perimeter clips, in improving the dynamic performance of SCSs were experimentally investigated. Results show that clip-in ceiling system performs better than lay-on system regardless of material and workmanship qualities. On the other hand, the quality aspect becomes the most important parameter in affecting the dynamic performance of lay-on type systems as opposed to tile weights and usage of perimeter clips. When high quality system is used, tile weight does not change the performance of lay-on system, however in poor quality system, tile weight becomes an important factor where heavier tiles considerably decrease the performance level. Perimeter clips marginally increase the dynamic performance of lay-on ceiling system, but it has no effect on the clip-in ceiling system under the shaking levels considered.

A Study on Energy expenditure in Korean Adult (한국인의 에너지 소비량에 관한 연구)

  • 오승호
    • Journal of Nutrition and Health
    • /
    • v.22 no.6
    • /
    • pp.423-437
    • /
    • 1989
  • A 4-week energy balance study was conducted to estimate the energy expenditure (EE) of 16 college age men and women, 20 to 26 year of age, by measurement of energy intakes and changes in body energy(BE) content(intake/balance technique), keeping their normal living pattern and maintenance body weight. Energy intake was measured by bomb calorimetry and estimated by food table. Fecal energy loss was calculated from nitrogen excreted. Fat mass was determined from body density estimated from skinfold tickness. 1) Gross energy (GE) intakes calculated from food table was not only 13.4% lower than those of bomb calorimetry but also lower 4 and 5% than metabolizable energy(ME) intakes for the male and female subjects, respectively. 2) Fecal energy loss was 7.2% and 6.9% proportion of the gross energy intake for the male and female subjects, respectively. 3) Mean daily metabolizable energy intakes estimated by subtract fecal and urinary energy loss was 2467kcal for the male subjects and 1897kcal for the female subjects. 4) Total body energy change estimated from body composition change over 31 days was decreased 7672kcal for the male subjects and 2689kcal for the female subjects. 5) Mean daily energy expenditure was 2714kcal (45kcal/kg of body weight) for the male subjects and 1984kcal(40kcal/kg of body weight) for the female subjects. 6) The estimated energy expenditure of college-age subjects in this study provide evidence to support the Recommended Dietary Allowances for energy of Korean normal adult.

  • PDF

Studies on the selection in soybean breeding. -II. Additional data on heritability, genotypic correlation and selection index- (대두육종에 있어서의 선발에 관한 실험적연구 -속보 : 유전력ㆍ유전상관, 그리고 선발지수의 재검토-)

  • Kwon-Yawl Chang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.3
    • /
    • pp.89-98
    • /
    • 1965
  • The experimental studies were intended to clarify the effects of selection, and also aimed at estimating the heritabilities, the genotypic correlations among some agronomic characters, and at calculating the selection index on some selective characters for the selection of desirable lines, under different climatic conditions. Finally practical implications of these studies, especially on the selection index, were discussed. Twenty-two varieties, determinate growing habit type, were selected at random from the 138 soybean varieties cultivated the year before, were grown in a randomized block design with three replicates at Chinju, Korea, under May and June sowing conditions. The method of estimating heritabilities for the eleven agronomic characters-flowering date, maturity date, stem length, branch numbers per plant, stem diameter, plant weight, pod numbers per plant, grain numbers per plant and 100 grain weight, shown in Table 3, was the variance components procedures in a replicated trial for the varieties. The analysis of covariance was used to obtain the genotypic correlations and phenotypic correlations among the eight characters, and the selection indexes for some agronomic characters were calculated by Robinson's method. The results are summarized as follows: Heritabilities : The experiment on the genotype-environment interaction revealed that in almost all of the characters investigated the interaction was too large to be neglected and materially affected the estimates of various genotypic parameters. The variation in heritability due to the change of environments was larger in the characters of low heritability than in those of high heritability. Heritability values of flowering date, fruiting period (days from flowering to maturity), stem length and 100 grain weight were the highest in both environments, those of yield(grain weight) and other characters were showed the lower values(Table 3). These heritability values showed a decreasing trend with the delayed sowing in the experiments. Further, all calculated heritability values were higher than anticipated. This was expected since these values, which were the broad sense heritability, contain the variance due to dominance and epistasisf in addition to the additive genetic variance. Genotypic correlations : Genotypic correlations were slightly higher than the corresponding phenotypic correlations in both environments, but the variation in values due to the change of environment appeared between grain weight and some other characters, especially an increase between grain weight and flowering date, and the total growing period(Table 6). Genotypic correlations between grain weight and other characters indicated that high seed yield was genetically correlated with late flowering, late maturity, and the other five characters namely branch numbers per plant, stem diameter, plant weight, pod numbers per plant and grain numbers per plant, but not with 100 grain weight of soybeans. Pod numbers and grain numbers per plant were more closely correlated with seed yields than with other characters. Selection index : For the comparison and the use of selection indexes in the selection, two kinds of selection indexes were calculated, the former was called selection index A and the later selection index B as shown in Table 7. Selection index A was calculated by the values of grain weight per plant as the character of yield(character Y), but the other, selection index B, was calculated by the values of pod numbers per plant, instead of grain weight per plant, as the character of yield'(character Y'). These results suggest that selection index technique is useful in soybean breeding. In reality, however, as the selection index varies with population and environment, it must be calculated in each population to which selection is applied and in each environment in which the population is located. In spite of the expected usefulness of selection index technique in soybean breeding, unsolved problems such as the expense, time and labor involved in calculating the selection index remain. For these reasons and from these experimental studies, it was recognized that in the breeding of self-fertilized soybean plants the selection for yield should be based on a more simple selection index such as selection index B of these experiments rather than on the complex selection index such as selection index A. Furthermore, it was realized that the selection index for the selection should be calculated on the basis of the data of some 3-4 agronomic characters-maturity date(X$_1$), branch numbers per plant(X$_2$), stem diameter(X$_3$) and pod numbers per plant etc. It must be noted that it should be successful in selection to select for maturity date(X$_1$) which has high heritability, and the selection index should be calculated easily on the basis of the data of branch numbers per plant(X$_2$), stem diameter(X$_3$) and pod numbers per plant, directly after the harvest before drying and threshing. These characters should be very useful agronomic characters in the selection of Korean soybeans, determinate growing habit type, as they could be measured or counted easily thus saving time and expense in the duration from harvest to drying and threshing, and are affected more in soybean yields than the other agronomic characters.

  • PDF

A Study of Test Method for Position Reporting Accuracy of Airborne Camera (항공기 탑재용 카메라 위치출력오차 측정방안 연구)

  • Song, Dae-Buem;Yoon, Yong-Eun
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.16 no.5
    • /
    • pp.646-652
    • /
    • 2013
  • PRA(Position Reporting Accuracy) for EO/IR(Electro-Optic/Infrared) airborne camera is an important factor in geo-pointing accuracy. Generally, rate table is used to measure PRA of gimbal actuated camera like EO/IR. However, it is not always possible to fix an EUT(Equipment for Under Test) to rate table due to capacity limit of the table on the size and weight of the object(EUT). Our EO/IR is too big and heavy to emplace on it. Therefore, we propose a new verification method of PRA for airborne camera and assess the validity of our proposition. In this method we use collimator, angle measuring instrument, 6 dof motion simulator, optical surface plate, leveling laser, inclinometer and poster(for alignment).

The Size Optimization Design of Crane using the Table of Orthogonal Array and Finite Element Analysis (직교배열표와 유한요소해석을 이용한 크레인의 치수최적설계)

  • 홍도관;최석창;안찬우
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2003.06a
    • /
    • pp.1471-1474
    • /
    • 2003
  • The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for tile mixed result of the structure analysis. tile buckling analysis and the table of orthogonal array according to the original crane's dimensional change. About the above two object functions, the effective of design change according to the change of design parameters could be estimated. Also, the crane's weight is reduced up to 20.58 percent maintaining the structural stability according to the thickness of plate.

  • PDF

A Study on the Shape Design of Micro Speaker Diaphragm (마이크로 스피커 다이아프램의 형상설계에 관한 연구)

  • Hong, Do-Kwa;Woo, Byung-Chul;Kim, Dong-Young;Ahn, Chan-Woo
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.15 no.7 s.100
    • /
    • pp.775-780
    • /
    • 2005
  • This study uses a characteristic function to explain correlations between the objective function and design variables. Analysis of means and table of orthogonal array were carried out. The change of shape of diaphragm, thickness of diaphragm and voice coil weight based on the table of orthogonal array Is made. Therefore this study carried to decide design variables for minimizing 1st natural frequency and maximizing 2nd natural frequency of diaphragm using design of experiments and characteristic function with constraints. we showed improved design variables.

Estimating Wood Weight Change on Air Drying Times for Three Coniferous Species of South Korea

  • Lee, Daesung;Choi, Jungkee
    • Journal of Forest and Environmental Science
    • /
    • v.32 no.3
    • /
    • pp.262-269
    • /
    • 2016
  • The purposes of this study are to calculate the green and dried weight using wood discs, to figure out weight change on air drying times, and to develop the model of wood disc weight change for Larix kaempferi, Pinus koraiensis, and Pinus densiflora. The variables affecting the weight change were investigated, and the pattern of weight change over time was figured out through linear models. When comparing the stem green weight calculated using wood discs in this study with the weight table of Korea Forest Service, the weight was not significantly different for L. kaempferi and P. koraiensis. On the other hand, in comparison of stem dried weight, the weight was significantly different in all of three species. In addition, various measurement factors were examined to figure out the relationship with weight change, and air drying times and disc diameter were found as significant independent variables. Finally, two linear models were developed to estimate air drying times of three species, fit statistics were significant for practical use.