• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.125-133
• /
• 2000

The purpose of this study was to investigate eating behavior, nutritional status and health condition of obese adult attending a weight control exercise. The subjects of this study consisted of 81 adult in some areas of Daegu. Their weight, height, triceps, midarm circumference were measured and their dietary intake and eating behavior were obtained by using questionnaires. Anthropometry was conducted to determine obesity. Average age of men and women were 38.1 and 35.2 years old respectively. Their intake of energy and protein were 69.5% and 97.4% of RDA respectively. Energy intake of normal and obese group was 74.4% and 64.9% of RDA respectively. Protein intake of normal and obese group was 99.7% and 95.3% of RDA respectively There was a negative correlation between PIBW and energy intake, PIBW and carbohydrate intake, BMI and energy intake, and BMI and carbohydrate intake. A relative magnitude of factors affecting weight decrease rate was analyzed by Stepwise multiple regression analysis. Overall results about relative influence of independent variables to dependent variable(weight decrease rate) indicated that the BMI(p<0.01) was the most significantly correlated with weight decrease rate in all subjects. The results of this study suggest that the extensive nutrition education in weight control program should be emphasized to prevent obesity early.

• Clinical and Experimental Pediatrics
• /
• 제54권11호
• /
• pp.429-435
• /
• 2011

Although Korean population has been growing steadily during the past four decades, the nation is rapidly becoming an aging society because of its declining birth rate combined with an increasing life expectancy. In addition, Korea has one of the lowest fertility rates in the world due to fewer married couples, advanced maternal age, and falling birth rate. The prevalence of low birth weight infants and multiple births has been increased compared with the decrease in the birth rate. Moreover, the number of congenital anomalies is expected to increase due to the advanced maternal age. In addition, the number of interracial children is expected to increase due to the rise in the number of international marriages. However, the maternal education level is high, single-mother birth rate is low, and the gender imbalance has lessened. The number of overweight babies has been decreased, as more pregnant women are receiving adequate prenatal care. Compared to the Asian average birth weight, the average birth weight is the highest in Asia. Moreover, the rate of low birth weight infants is low, and infant mortality is similarly low across Asia. Using birth data from Statistics Korea and studies of birth outcomes in Korea and abroad, this study aimed to assess the changes in maternal and infant characteristics associated with birth outcomes during the past four decades and identify necessary information infrastructures to study countermeasures the decrease in birth rate and increase in low birth weight infants in Korea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.483-490
• /
• 2002

A massive amount of marine clay produced as dredging of coast and sea bed is often dumped in open sea and filled in pond. The treatment of marine clay demand a large area and make fatal environmental problems for echo system. This research work intend to manufacture a light-weight landfill materials which are produced by mixing the dredged marine clay with various amount cement and foam. An extensive Uniaxial and Triaxial compression test are carried out to investigate the strength characteristics of the light-weight cement mixed marine clay with foam under various test conditions. The results indicated that the required unit weight has been achieved with negligible change after 28days curing time in water. It is also recognized that the compressive strength of light-weight landfill materials linearly decrease with increasing initial water content, and the rate of strength decrease with increasing initial water content in water curing was smaller than that of air curing Futhermore, the rate of strength decreased with increasing initial water content, however, the rate become smaller as cement content increased.

• Environmental Analysis Health and Toxicology
• /
• 제3권1_2호
• /
• pp.43-54
• /
• 1988

Experiment was performed to investigate the immunotoxicity of cadmium administered orally and the effect of ginseng petroleum ether fraction on it. Mice were given 3, 30, or 300 ppm cadmium as cadmium chloride orally in the drinking water and injection of ginseng petroleum ether fraction intraperitoneally for 4 weeks. Mice were sensitized and challenged with sheep red blood cells (S-RBC). Humoral immune response was evaluated by antibody production and Arthus reaction. Body weight gain, spleen weight, thymus weight, and liver weight were also measured. In the present study, cadmium generally suppressed the humoral immunity. There was decrease in the rate of body weight gain and liver weight to body weight by cadmium-administration. Ginseng petroleum ether fraction showed restoring effect, to some extent, on the decrease in PFC and in the rate of liver weight to body weight by cadmium-administration. But it more suppressed Arthus reaction.

• 대한수의학회지
• /
• 제15권2호
• /
• pp.177-180
• /
• 1975

This study was undertaken to obtain more detailed knowledge of the oxygen consumption rate of chick embryos, of the relationship between the increasing rate of embryo weight and that of oxygen consumption, of the daily increase of oxygen consumption by that of embryo weight, and of the metabolic rate of the White Leghorn eggs. The results obtained are summarized as follows. 1. The average oxygen consumption rate of the chicken embryo at the 3rd day of incubation is 0.8ml/h, STPD. It is strongly suggested that this value can used as a physiological criterion to classify the fertilized and unfertilized eggs, on the other hand oxygen consumption rate of the fertilized eggs reaches a plateau between the 18th and 20th days. 2. There exists a parallel relationship between the increasing rate of embryo weight and that of oxygen consumption rate during the incubation period. 3. There are not exist a parallel relationship between the daily increase of embryo weight and that of oxygen consumption during the whole incubation period. 4. The metabolic rate of chicken embryo(ml/h/g) is highest in the early stage of incubation and it started to decrease sharply until the 8th day follow by slow decrease thereafter.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.252-259
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of progressive body weight decrease combined with increasing level of overground walking speed training for patients with chronic stroke. Methods: Eighteen subjects with chronic stroke were composed of the control group (5% body weight support combined with increasing speed training) and the experimental group (progressive body weight decrease with increasing speed training); three sets, three times per week over a period of four weeks. Results: Significant differences in terms of comfortable gait speed (CGS) and the rate of change of CGS were observed between the control and experimental groups (p<0.05). However, no significant difference in the dynamic gait index was observed between the control and experimental groups (p>0.05). A significant difference in the 6 minute walking test (6MWT) was observed for the experimental group, and a significant difference in the rate of change for the 6MWT was observed between the control and experimental groups (p<0.05). Conclusion: The progressive body weight decrease combined with increasing in level of overground walking speed training may be a better and more effective method for community walking and reintegration.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.343-348
• /
• 2018

Each of the two polycarbonates (PC) of different molecular weights was blended with acrylonitrile-butadiene-styrene (ABS) under high-shear rate processing to afford PC/ABS. Sizes of ABS dispersed phases and mechanical properties of PC/ABS blends were investigated and high-shear rate processing of PC/ABS was carried out by changing screw speed and processing time. Prepared specimens were examined by scanning electron microscope (SEM) to observe morphology changes. Sizes of ABS dispersed phases in PC/ABS blends were observed to decrease gradually as screw speeds increased. Tensile strengths and elongations of specimens were investigated by universal testing method (UTM) to study the influence of molecular weight of PC exerting on PC/ABS blends. As a result, PC1/ABS blends (PC1: higher molecular weight PC) exhibited more strengthened properties than PC2/ABS (PC2: lower molecular weight PC). The tensile strength of PC1/ABS showed an increasing tendency when the screw speed increased, and the elongation did not show a significant decrease, but increased slightly with increasing shear time at a constant screw speed of 1000 rpm.

• 생물환경조절학회지
• /
• 제2권1호
• /
• pp.27-36
• /
• 1993

Carbon dioxide enrichment for greenhouse crops has generally been a standard commercial practice for many years. Vegetable crops such as tomato, cucumber, and lettuce respond positively to the $CO_2$ enrichment. But improper $CO_2$ enrichment leads to physiological damage and economical loss. This study was carried out to develop a $CO_2$ concentration control algorithm considering growth stage and efficiency. The measurand was $CO_2$ consumption rate and top fresh weight that represents growth stage. The weight of top fresh lettuce as a whole in the tray was measured through a non-destructive method. The demand in $CO_2$ concentration according to growth stage was investigated. The results are summarized as follows. 1. The $CO_2$ consumption rate could be measured within the error of $\pm$ 15.4mg$CO_2$/hr in the range of $CO_2$ concentration of 500-1500ppm. 2. The weight of top fresh lettuce could be measured within the error $\pm$ 4.3g in the range of 0-1400g. 3. The $CO_2$ control model developed could determine an economical $CO_2$ supply rate considering $CO_2$ consumption rate and leakage rate. 4. The $CO_2$ control algorithm based on the control model was composed of feedforward control for maintaining a stable $CO_2$ concentration level, and feedback control with $CO_2$ consumption rate and top fresh weight for adapting to the change in $CO_2$ demand by growth stage. 5. For the performance test with the developed control algorithm on lettuce the decrease in $CO_2$ supply rate was obtained without a significant decrease in top fresh weight.

• 대한화학회지
• /
• 제7권2호
• /
• pp.96-105
• /
• 1963

The weight decrease curves of 18 kinds of polymers have been measured by thermobalance at the same condition where temperature is increased $1^{\circ}C$ per minutes under nitrogen or air atmosphere. The curves are further differentiated to obtain rate curve of weight decrease. Those curve offer a method to compare relative thermal stability, effects of oxygen or modes of thermal degradation of polymers qualitatively. The curves could be classified into following four types: Polystyrene, polymethylmethacrylate and acetal polymer belong to the first type. Those polymers depolymerize mainly into corresponding monomers, weight decrease curves are steepy up to perfect vaporization of polymers and rate curves show a relatively sharp peak. (Type I) Polyvinyl chloride represents the second type. This polymer decomposes with splitting off of hydrogen chloride. The thermogravimetric curve rises rapidly at first, then level off at the moderate weight decrease and gradually rises. Polyvinyl acetate also belongs to this class. (Type II) The modification of the second type is represented by polyester. The curve at the early stage is less steep, the leveling off at the next stage is less clear and the final rising of the curve is steeper than the normal second type. Polyamide, polyurethane, and polycarbonate belong to this type. (Type II') The thermal decomposition of the third type polymers is more complex than that of others. Various irregular chain scissions including side chain splitting and depolymerization to monomers occur simultaneously. The weight of the polymer decreases gradually and the rate curve does not show sharp peaks. Polyvinyl alcohol and diene polymers belong to this type. (Type III) Generally, polycondensation polymers are more stable toward heat than addition polymers and polymers having aromatic nucleus show good thermal stability. Polymers having tertiary carbon atoms such as polystyrene or polypropylene and acetal resin start decomposition under airatmosphere at the temprature below $50^{\circ}C$ or more of the temperature where the polymers start decomposition under nitrogen atmosphere.