• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.67-74
• /
• 2014

An inverter scroll compressor is used for the air conditioning in cars. Scrolls would be changed from the aluminum material to the magnesium material in order to satisfy the light weight trends of cars. The material changing influences on the scroll dimensions particularly the gap between two scrolls. Since the larger gap declines the performance of the compression, the gap between wraps of scrolls or the gap between wraps of scrolls to the plate of the opposite scroll is regarded as an important design variable. This paper is focused on the effects of the thermal stress due to the materials changing. The temperature difference between the inlet and the outlet is about 60 degrees and the highest operating temperature in the compressor is less than 110 degrees. The level of thermal stresses in the magnesium scroll is less than the result from aluminum one. The trend of the deformation is revealed that the normal directional deformation is 2 times lager than the in-plane directional deformation. Therefore the gap between the top of the wrap to the plate of the opposite scroll become more important than the other gaps. The orbiting scroll deforms larger than the fixed scroll by the thermal stresses. The deformation of the magnesium scroll is about 10% lager than that of the aluminum scroll. This value is similar to the ratio of the coefficients of thermal expansion of two materials. At the initial design stage, the results give many useful guides to engineers to propose gaps between parts.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.151-160
• /
• 1990

In order to develop a controlled-release oral drug delivery system (DDS) which sustains the plasma acetaminophen (AAP) concentration for a certain period of time, microporous membrane-coated tablets were prepared and evaluated in vitro. Firstly, highly water-soluble core tablet of AAP were prepared with various formulations by wet granulation and compression technique. Then the core tablets were coated with polyvinychloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of core tablets and coating suspensions on the pharmaceutical characteristics such as drug release kinetics and membrane stability of the coated tablets was investigated in vitro. AAP was released from the coated tablets as a zero-order rate in a pH-independent manner. This independency of AAP release to pH change from 1.2 to 7.2 is favorable for the controlled oral drug delivery, since it will produce a constant drug release in the stomach and intestine regardless of the pH change in the GI tract. Drug release could be extended upto 10 h according to the coating condition. The release rate could be controlled by changing the formula compositions of the core tablets and coating suspensions, coat weight per each tablet, and especially PVC/sucrose ratio and particle size of the sucrose in the coating suspension. The coated tablets prepared in this study had a fairly good pharmaceutical characteristics in vitro, however, overall evaluation of the coated tablet should await in vivo absorption study in man.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.2 s.9
• /
• pp.127-137
• /
• 2003

In locations where the cost of concrete is relatively high, or in situations where the weight of concrete members is to be kept to a minimum, it may be economical to use hollow R.C. members. The ductility of circular hollow R.C. columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. In this study, moment-curvature analyses are conducted with Mander's confined concrete stress-strain relationship. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.48-56
• /
• 2006

In this paper, we proposed the high quality audio watermarking algorithm using MDCT/IMDCT (Modified DCT/Inverse Modified DCT) with psychoacoustic model. Generally, a digital audio watermark is embedding the frequency domain after frequency transform of the digital audio data but the digital audio quality is affected by watermarking. In our scheme, the digital audio data is spread with PN((Pseudo Noise) code and then audio watermark is embedded in MDCT processing that refers psychoacoustic model. In MDCT processing, according to the shape of filter bank output, the block switching selects a window sequence that has 256, 1,024 or 2,048 points interval for high quality audio. The author confirm that when watermark weight ${\alpha}$ is 2.5 below, the detection ratio of watermark is a satisfied to SDMI's(Secure Digital Music Initiative) recommendation 50% above and SM is $50{\sim}68dB$ range with mainly 4 kind of attacks(Compression, Cropping, FFT and Echo).

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.155-167
• /
• 2007

Objectives : This study was performed to evaluate the general distribution and the efficacy of oriental medical treatment for low back pain. Methods: We have selected of the moxa bucket moxibustion. We make a comparative study of the thermodynamic characteristics of moxa bucket moxibustion. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa bucket moxibustion made by oak wood. Results : The 80 cases of low back pain patients was analyzed according to the distribution of sex, age, the period of disease, contributing factor, the patient-condition on admission, the symptom on admission, the duration of admission, the reading of the X-ray and the treatment efficacy was evaluated respectively. 1. Female was more than male in the ratio of 1:1.2, and thirties and seventies 25% the most, the acutest phase 46.3% the most, reason unknown 33.8% the most, Grade III 50% the most, L.B.P. only 51.3% the most, the day of 6-10 30% the most, compression Fx 30% the most. 2. In the total treatment result, the good was 51.3%, the excellent 22.5%, the fair 17.5%, the poor 8.8% in order. About 'the effective rate'(the percentage of positive effective treatment cases) of each distribution, the fifties 100% the most, the acutest phase 97.3% the most, the slip down, weight lifting, overuse 100% the most respectively, Grade III 97.5% the most, L.B.P. only 95.1% the most, the day of 11-15 100% the most, HN.P. 93.3% the most. Conclusions : We have known the efficacy of oriental medical treatment for L.B.P. was good and early treatment was better than late treatment and main cause of L.B.P. was degenerative change.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.71-74
• /
• 2007

With the changes of times the building materials tend to extend the demand for application under the special environment. Since high-ductile mortar is developed, the building materials show excellent performance like toughness, compression, tensile, and bending, etc. in the general concrete from the existing brittle point. And, recently they are widely used as repairing and reinforcing materials both at home and abroad because they are recognized as excellence like durability and fire-resistance. However, it is in a situation of creating problems in durability because it frequently happened deterioration of buildings that have already repaired and reinforced at a time when it requires reconstruction of recently deteriorated construction structure recently. Therefore, in this study improved with a more repair Material development and reinforcement of the second high-ductile mortar products for a variety of basic materials were presented want, research plans used include traditional repair materials and the newly developed PCM (polymer cement mortar) structural reinforcement type indicated that comparison. PCM analysis in order to present a rate depending on the types fiber 0, 1.2 and 2.0(%) at three levels and mixture water according to ratios of weight to Plain in the 2.0 and 1.85(kg) at two levels is set, the results were as follows. 1) This study has shown that PCM had excellent strain hardening behavior at the same time that the bending stress increased according to the fiber contents. 2) This study has shown that it had the durability performance due to the high substance transmission according to the fiber contents.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.280-287
• /
• 1999

The aims of this research were to study on the relationship between the mechanical properties and the deformation behavior of weft-knitted fabrics as a function of knit structure and knit density. Eighteen weft-knitted fabrics were produced with six different knit structures ($1{\times}1$ rib, half-cardigan rib, half-milano rib, interlock, single-pique, and crossmiss interlock) and three different knit densities (loose, medium, tight). The mechanical properties of these samples were measured using the KES-F system. The 2HBIW increased as knit density was raised. The increase was greater for the double knit fabrics in all samples. Half-milano rib and crossmiss interlock samples showed the lowest 2HG/G values. The double knits were smaller than those of single knits indicate a higher degree of surface smoothness. The ratio of compression energy to weight per unit area of the double knits had lower values than the single knits.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.5
• /
• pp.456-464
• /
• 2014

Commercial vehicle drivers typically feel more fatigued compared to general-public drivers. because they spend longer periods of time driving and experience more rough road conditions. This study showed that the application of a magnet, a linear spring, and a seat suspension with nonlinear characteristics was the optimal design to increase comfort while driving. The resonant frequency for the optimal design suspension was 2.8 Hz, and the stiffness was analyzed through displacement-load experiments. Vibration transmissibility was analyzed by suspension stiffness and the existing dynamic compression. The magnetic spring type was at 0.875. As a result, the X-type magnetic spring performed better than the existing spring at 0.729.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.23-34
• /
• 2020

Recently, the artificial intelligence deep learning field has been hard to commercialize due to the high computing power and the price problem of computing resources. In this paper, we apply a double pruning techniques to evaluate the performance of the in-depth neural network and various datasets. Double pruning combines basic Network-slimming and Parameter-prunning. Our proposed technique has the advantage of reducing the parameters that are not important to the existing learning and improving the speed without compromising the learning accuracy. After training various datasets, the pruning ratio was increased to reduce the size of the model.We confirmed that MobileNet-V3 showed the highest performance as a result of NetScore performance analysis. We confirmed that the performance after pruning was the highest in MobileNet-V3 consisting of depthwise seperable convolution neural networks in the Cifar 10 dataset, and VGGNet and ResNet in traditional convolutional neural networks also increased significantly.