• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.207-230
• /
• 2012

Nowadays CFRP (Carbon Fiber Reinforced Polymer) became widely used materials for the strengthening and retrofitting of structures. Many experimental and analytical studies are encountered at literature about strengthening beams by using this kind of materials against static loads and cyclic loads such as earthquake or wind loading for investigating their behavior. But authors did not found any study about strengthening of RC beams by using CFRP against low velocity impact and investigating their behavior. For these reasons an experimental study is conducted on totally ten strengthened RC beams. Impact loading is applied on to specimens by using an impact loading system that is designed by authors. Investigated parameters were concrete compression strength and drop height. Two different sets of specimens with different concrete compression strength tested under the impact loading that are applied by dropping constant weight hammer from five different heights. The acceleration arises from the impact loading is measured against time. The change of velocity, displacement and energy are calculated for all specimens. The failure modes of the specimens with normal and high concrete compression strength are observed under the loading of constant weight impact hammer that are dropped from different heights. Impact behaviors of beams are positively affected from the strengthening with CFRP. Measured accelerations, the number of drops up to failure and dissipated energy are increased. Finite element analysis that are made by using ABAQUS software is used for the simulation of experiments, and model gave compatible results with experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 2002

Recently tube hydroforming technology has been one of the most important technology in automotive industry in the point of saving weight and high quality for collision accidents. In this paper, experimental studies for axial compression tests of hydroformed tubes are performed to investigate the collapse absorption characteristics. The collapse absorption abilities are discussed and compared for as-received, hydroformed, and press formed tubes.

• 한국가구학회지
• /
• 제12권2호
• /
• pp.29-38
• /
• 2001

This study was carried out to develope a new process of flattening bamboo pieces(3 months old) by two steps of utilizing microwave oven and hot press. Internode bamboo pieces were impregnated with low molecular weight phenol formaldehyde resin (PF) under vacuum of 76 cmHg, heated in a household microwave oven in 1 minute, pressed on the temperature of $145^{\circ}C$ by the hot press for 10 minute, and then cooled by the cold press in their flattened form. The physical and mechanical . Properties of compressed flattened bamboo were as follows: 1) PF1(Mw:427) and PF2(Mw:246) sol. met the success of flattening of internode bamboo pieces in both of P. bambusoides and P. nigra var. PF2 showed the more plasticity to flatten the bamboo than PFI. The PF2 sol. with low molecular weight(Mw:246) gave the more weight gain than that of PF1 in the equal concentration. PF1 of 5% (NVC) and PF2 of 10% (NVC) sol. gave the best result for physical and mechanical properties and from a economical view point. 2) The PFI of 5% (NVC) sol. with low molecular weight decreased the water absorption of 62-63% and increased the bending strength (MaR) of 80-90%, compression strength of 43-54%. 3) The PF2 of 10% (NVC) sol. with low molecular weight decreased the water absorption of 56-57% and increased the bending strength (MaR) of 64-86%, compression strength of 39-63%.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.233-239
• /
• 2010

The purpose of this study was to determine the effect of compression clothing on the body shape of the human subjects. Thirty seven healthy females being overweighted with local adiposity on the buttocks and legs between the ages of 20's to 50's were used as the human subjects for the study. The selected subjects wore the compression clothing during 60 days by 8 hours a day. At the start(T0), after 30(T30) and after 60 days of treatment(T60), a cutaneous echography was measured on the right trochanter area of each volunteer in order to assess the thickness of the subcutaneous fatty tissue. At the start(T0), after 30(T30) and after 60 days of treatment(T60), the body weight of each volunteer was taken and the instrumental variations of skinfold measurements of the abdominal fold and inner thigh circumference of the waist, hips and thigh were conducted. The results show that the echography and weight loss of subjects were reduced to 8.34% and 2.08% after 60 days, respectively. Moreover, the skinfold of subjects was also reduced. Finally, skin elastometry of subjects increased.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.77-82
• /
• 2004

Expression-deliquoring tests using three types of paper sludges (tissue, newsprint, and paperboard) as deliquoring agent were carried out in order to investigate the effects of sludge dosage and pressure on the expression-deliquoring of slurry. The addition of deli­quoring agent causes expression-deliquoring of slurry to be faster than would be the case without the deliquoring agent. In case of the tissue sludge, the highest compression rate was achieved when $5\%$ of deliquoring agent was added, while in cases of the news­print and the paperboard sludge, $7\%$. Compression rate was increased as pressure increases. Porosity was decreased as pressure increases. The lowest porosity was observed when $5\%$ of tissue sludge was added. When compared the weight of cake where deliquoring agent was not added and the weight of cake that was fastest expression-deliquoring, there was about $17.5\%$ of the weight reduction

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.159-163
• /
• 2003

본 논문에서는 복합적층 평패널의 최소중량화설계를 수행하기 위하여 길이방향 보강재로 보강된 평패널에 축압축 하중이 작용할 경우 좌굴하중을 구한다. 또한 좌굴에 대한 최소중량화설계를 유한차분에너지법을 이용한 선형좌굴이론과 비선형좌굴이론에 의해서 구하고 비선형 탐색 최적설계기법 ADS를 활용하여 해석한다. 복합적층 평패널의 종횡비는 1, 3, 7에 대하여 고려하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.103-107
• /
• 2001

This study is simulation about buckling behavior under axial compression which is cylindrical panel laminated USN125 and USN150 made by various winding angle. And also this study compare with linear and nonlinear FDEM theory, and FEM theory. To solve the objective function and the design variables, this study use the linear and nonlinear buckling theories or FDEM and nonlinear search optimum design method of ADS for minimum weight design on which stiffened laminated composite cylindrical panel with stiffener that R-type section.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.830-839
• /
• 2008

This study is designed to manufacture the upgraded sound absorption concrete by using foamed concrete by using artificial light weight aggregate which raises the continuous void ratio to increase the sound absorption ratio and improve the strength. In manufacturing the sound absorption block, the pre-foaming form is applied to generate continuous voids, controlling the density by the addition of bubbles. It is general that the more porosity creates, the weaker strength becomes. Each of specimens are used for this experiment and measured their absorption ratio to examine the absorption property depending on frequency. As a results of experiment, it is evaluated that the absorption capacity of the sound absorption block has relation to compression strength and surface shape.

• 한국의류산업학회지
• /
• 제19권1호
• /
• pp.61-69
• /
• 2017

The purpose of this study is to suggest the sizing system of medical compression stockings for Korean adult men in order to develop compression stockings with excellent dimensional fit reflecting the real human body data. Analyses were conducted on the raw data that the subjects consist of 19~60 aged men of Size Korea 2010 in this study. The stature and weight for the pantyhose stockings, and the ankle circumference and calf circumference for the thighs, knees, and calf support types of stockings were selected as the basic dimension items. The size interval of the pantyhose stockings were 2cm in stature and 2kg in weight. In addition, the thigh, knee, and calf support types of stockings were set with ankle circumference and calf circumference set at 1cm intervals. The designation is the same as KS pantyhose standard, S, M, L, XL. As a result, in the case of pantyhose compression stockings for men, the coverage ratio showed 97.2% in total, with 46.3% for M, 36.5% for L, 7.4% for S, and 6.9% for XL. In the case of thigh type, knee type and calf support types, the percentage of coverage was 99.96% in total, with 57.6% in M, 31.1% in L, 4.7% in S, and 1.6% in XL. The results of this study would help to improve the dimensional conformity of the medical compression stockings for Korean adult men.

• 융합신호처리학회논문지
• /
• 제22권3호
• /
• pp.99-103
• /
• 2021

최근 CNN(Convolutional Neural Network)이 다양한 컴퓨터 비전 분야에서 우수한 성능으로 널리 사용되고 있다. 그러나 CNN은 계산 집약적이고 많은 메모리가 요구되어 한정적인 하드웨어 자원을 가지는 모바일이나 IoT(Internet of Things) 기기에 적용하기 어렵다. 이런 한계를 해결하기 위해, 기존의 학습된 모델의 성능을 최대한 유지하며 네트워크의 크기를 줄이는 인공신경망 경량화 연구가 진행되고 있다. 본 논문은 신경망 압축 기술 중 하나인 프루닝(Pruning)의 문턱값을 동적으로 조정하는 CNN 압축 기법을 제안한다. 프루닝될 가중치를 결정하는 문턱값을 실험적, 경험적으로 정하는 기존의 기술과 달리 정확도의 저하를 방지하는 최적의 문턱값을 동적으로 찾을 수 있으며, 경량화된 신경망을 얻는 시간을 단축할 수 있다. 제안 기법의 성능 검증을 위해 MNIST 데이터 셋을 사용하여 LeNet을 훈련시켰으며, 정확도 손실 없이 약 1.3 ~ 3배의 시간을 단축하여 경량화된 LeNet을 얻을 수 있었다.