• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.625-633
• /
• 2013

본 다중반응표면 최적화는 다수의 반응변수(품질특성치)를 동시에 고려하여, 입력변수의 최적 조건을 찾는 것을 목적으로 한다. 지금까지 다중반응표면 최적화를 위하여 다양한 방법이 제안되어 왔는데, 그 중 평균제곱오차 최소화법은 다수의 반응변수의 평균과 표준편차를 동시에 고려하여 최적화하는 방법이다. 이 방법은 기본적으로 평균과 표준편차가 동일한 가중치를 가지고 있다는 것을 전제로 하고 있다. 그러나 문제의 상황에 따라 평균과 표준편차에 서로 다른 가중치를 부여해야 하는 경우도 있다. 이에 본 논문에서는 기존의 평균제곱오차를 확대하여 평균과 표준편차에 서로 다른 가중치도 부여할 수 있도록 가중평균제곱오차 최소화법을 제안하고자 한다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.74-81
• /
• 2016

This paper presents an experimental study to ivestigate mechanical property of concretes according to addition of urea and urea-water soluble sulfur contents. Urea was added at 5~20% replacement by weight of water, and water soluble sulfur was used at 2%, 4% replacement by weight of cement. The setting times, the hydration heat, the compressive strength, and the drying shrinkage, were measured on concretes with single and binary admixtures. From the test result, it was confirmed that the hydration heat of urea-water soluble sulfur was lower than that of normal concrete by $10.1^{\circ}C$, and the drying shrinkage of urea-water soluble sulfur concrete was more excellent than normal concrete. In the case of urea of 5%, Compressive strength were improved with an increase of water soluble sulfur contents. The urea-water soluble sulfur used in this research can be used as improvement materials for drying shrinkage and compressive strength.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.26-34
• /
• 1999

This paper was intended to find out the relationship between optical and interior properties of coated paper and printability with the variation of particle size of ground calcium carbonate(GCC) by using Mercury Porosimeter, and to find out the pore properties of coated paper as well. The viscosity and water retention of coating color was increased and smothness, sheet gloss and porosity of coated paper were improved as the particle size of GCC was decreased. However, there was no difference in opacity and brightness of coated paper. The pore volume of coated paper was decreased, but the number of pores was drastically increased according to the decrease of the particle size of GCC. The weight of ink transferred into coated paper was increased in proportion to pore volume of coated paper. However, the weight of damping water and ink induced toward coated paper was slightly increased. Ink setting was accelerated printing gloss was not changed. Therefore, optical and interior properties of coated paper seemed to be affected by the pore property of coated paper and printability was also affected by it.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.119-124
• /
• 2009

Purpose: The National Institute for Occupational Safety and Health (NIOSH) lifting equation (NLE) is a useful tool to ergonomically analyze a workload. The NLE has high reliability and it can assess tasks by analyzing the work process. The purpose of this case study was to try using the NLE to analyze the workload of transferring patients by physical therapists in the hospital setting. Methods: We observed a physical therapist (PT) transferring patients from a wheelchair to a tilt table and a therapeutic table in one day. Two types of patient transferring methods were evaluated; (1) the manual single person method of stand, pivot and transfer, and (2) manual two person lifting under the thigh and grasping the waist for totally dependent patients. Results: The NIOSH lifting indexes of a person grasping the waist during the manual two person lifting were 5.52~4.48 according to the patient's weight. The NIOSH lifting indexes were 3.34 and 4.48 for the tasks performed by the manual single person method. Conclusion: Because transferring patients is not done very frequently, patients transferring tasks by a PT are not included as one of the musculoskeletal disorder related risky work criteria of the Korea Ministry of Labor. But the NIOSH lifting indexes of a person grasping the waist during the manual two person lifting and the manual single person method were over the NIOSH recommended weight limit threshold.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.986-993
• /
• 2017

Object Tracking is a technique for tracking moving objects over time in a video image. Using object tracking technique, many research are conducted such a detecting dangerous situation and recognizing the movement of nearby objects in a smart car. However, it still remains a challenging task such as occlusion, deformation, background clutter, illumination variation, etc. In this paper, we propose a novel deep visual object tracking method that can be operated in robust to many challenging task. For the robust visual object tracking, we proposed a Convolutional Neural Network(CNN) which shares weight of the convolutional layers. Input of the CNN is a three; first frame object image, object image in a previous frame, and current search frame containing the object movement. Also we propose a method to consider the motion of the object when determining the current search area to search for the location of the object. Extensive experimental results on a authorized resource database showed that the proposed method outperformed than the conventional methods.

• ETRI Journal
• /
• 제27권6호
• /
• pp.733-746
• /
• 2005

In the context of multi-protocol label switching (MPLS) traffic engineering, this paper proposes a scalable constraintbased shortest path first (CSPF) routing algorithm with multiple QoS metrics. This algorithm, called the multiple constraint-based shortest path first (M_CSPF) algorithm, provides an optimal route for setting up a label switched path (LSP) that meets bandwidth and end-to-end delay constraints. In order to maximize the LSP accommodation probability, we propose a link weight computation algorithm to assign the link weight while taking into account the future traffic load and link interference and adopting the concept of a critical link from the minimum interference routing algorithm. In addition, we propose a bounded order assignment algorithm (BOAA) that assigns the appropriate order to the node and link, taking into account the delay constraint and hop count. In particular, BOAA is designed to achieve fast LSP route computation by pruning any portion of the network topology that exceeds the end-to-end delay constraint in the process of traversing the network topology. To clarify the M_CSPF and the existing CSPF routing algorithms, this paper evaluates them from the perspectives of network resource utilization efficiency, end-to-end quality, LSP rejection probability, and LSP route computation performance under various network topologies and conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.125-127
• /
• 1998

The widely used power supply (Switched Mode Power Supply : SMPS) as a source in order to stabilize direct current for electronics or communication systems has merits, when it is compared to the existing source for stability, such as high efficiency, small size, light weight by means of switching process of the semiconductor device which controls the flow of power. However, due to existence of inductors and capacitors used for charging energy, the source part in electronic or communication systems hasn't reached the speed, that is supposed to get, for achieving smaller size and lighter weight. In order to got smallness in size, it is necessary to increase switching frequency. And that makes devices for measuring energy smaller. Nevertheless, the rise switching frequency brings increases in switching loss, inductor loss, and power loss. Also, the occurrence of surge and noise caused by high frequency switching is setting higher. The resonant converter has been considered as one of methods that give solutions for the problems of SMPS and that method has been paid attention as a source technology in electronics and communication.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.473-485
• /
• 2024

This paper proposes a composite form of fuzzy adaptive control plan based on a robust observer. The fuzzy 2D control gains are regulated by the parameters in the LMIs. Then, control and learning performance indices with weight matrices are constructed as the cost functions, which allows the regulation of the trade-off between the two performance by setting appropriate weight matrices. The design of 2D control gains is equivalent to the LMIs-constrained multi-objective optimization problem under dual performance indices. By using this proposed smart tracking design via fuzzy nonlinear criterion, the data link can be further extended. To evaluate the performance of the controller, the proposed controller was compared with other control technologies. This ensures the execution of the control program used to track position and trajectory in the presence of great model uncertainty and external disturbances. The performance of monitoring and control is verified by quantitative analysis. The goals of this paper are towards access to adequate, safe and affordable housing and basic services, promotion of inclusive and sustainable urbanization and participation, implementation of sustainable and disaster-resilient buildings, sustainable human settlement planning and manage. Therefore, the goal is believed to achieved in the near future by the ongoing development of AI and control theory.

• 디지털융복합연구
• /
• 제16권2호
• /
• pp.117-126
• /
• 2018

전 세계적인 정보보안 위협의 증대에 따라 조직들은 보다 전문화된 정보보안 정책 및 시스템을 도입 및 활용에 투자 비중을 높이고 있다. 정보보안은 보안 시스템 및 정책을 이행하는 조직원들의 참여가 무엇보다 필요하며, 조직 내부의 보안 수준을 높이기 위해서는 조직원들의 정보보안 준수의도 향상을 위한 조직의 체계적인 지원이 무엇보다 필요하다. 본 연구는 정보보안 분야에 공정성이론과 목표설정이론을 적용하여 조직원의 정보보안 준수의도를 높이기 위한 매커니즘을 찾는다. 즉, 보안정책 목표설정이 조직원들의 보안관련 공정성 인식수준에 긍정적인 영향을 미치고, 공정성은 준수의도에 긍정적인 영향을 미친다는 연구모델 기반 가설 검증을 실시한다. 연구대상은 정보보안 정책을 도입한 조직의 조직원들이며, 설문조사를 통하여 유효샘플 383개를 수집하였다. 연구가설 검증은 구조방정식 모델링을 실시하였다. 보안정책 목표 요인(목표 난이도, 목표 구체성)이 조직원의 보안관련 공정성 인식을 높이며, 보안관련 공정성(분배, 절차, 그리고 정보 공정성)이 준수의도에 긍정적 영향을 주는 것으로 나타났다. 결과는 조직의 보안 정책에 대한 조직원들의 준수의도 향상을 위한 전략적 접근 방향을 제시한다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.326-326
• /
• 2017

Climate warming is the issue on the global scale. Soybean can be seriously damaged when high temperature occurs during a reproductive stage such as the flowering and pod-setting period according to the Representative Concentration Pathway (RCP) (2021~2100) 8.5 scenarios. The weather in 2016 was very different from other years (average for 30 years from 1980 to 2010) ; the highest temperature was $33.7^{\circ}C$ which was higher $3.29^{\circ}C$ than average temperature from last 30 years and average rainfall was 26.5 mm, lower 140.9 mm than average rainfalls from other years. Especially, the highest temperature during soybean flow-ering and pod setting stage was $26.8^{\circ}C$ which was higher $0.1^{\circ}C$ and rainfall was 172.2 mm, higher 47.8 mm than other years from the first to the 20th in the October at soybean seed elongation stage. Soybean leaves were turned upside down by the drought stress during the flowering and pod-setting stage. The numbe-r of pods and seeds per unit area decreased 11.0% and 30.3% compared with the previous year, respectively. The ripening period was prolonged by 21 days because of high temperature and soil moisture contents due to the continual rainmade increase of the seed weight up to 15.6% and the yield decreased 7.1% compared to the previous year.