• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.327-336
• /
• 2014

Recurrent event data occurs when a subject experiences same type of event repeatedly and is found in various areas such as the social sciences, Economics, medicine and public health. To analyze recurrent event data either a total time or a gap time is adopted according to research interest. In this paper, we analyze recurrent event data with incomplete observation gap using a gap time scale. That is, some subjects leave temporarily from a study and return after a while. But it is not available when the observation gaps terminate. We adopt an interval censoring mechanism for estimating the termination time. Furthermore, to model the association among gap times of a subject, a frailty effect is incorporated into a model. Programs included in Survival package of R program are implemented to estimate the covariate effect as well as the variance of frailty effect. YTOP (Young Traffic Offenders Program) data is analyzed with both proportional hazard model and a weibull regression model.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.311-316
• /
• 2016

Breast cancer is one of the most common causes of cancer mortality in Iran. Social determinants of health are among the key factors affecting the pathogenesis of diseases. This cross-sectional study aimed to determine the social determinants of breast cancer survival time with parametric and semi-parametric regression models. It was conducted on male and female patients diagnosed with breast cancer presenting to the Cancer Research Center of Shohada-E-Tajrish Hospital from 2006 to 2010. The Cox proportional hazard model and parametric models including the Weibull, log normal and log-logistic models were applied to determine the social determinants of survival time of breast cancer patients. The Akaike information criterion (AIC) was used to assess the best fit. Statistical analysis was performed with STATA (version 11) software. This study was performed on 797 breast cancer patients, aged 25-93 years with a mean age of 54.7 (${\pm}11.9$) years. In both semi-parametric and parametric models, the three-year survival was related to level of education and municipal district of residence (P<0.05). The AIC suggested that log normal distribution was the best fit for the three-year survival time of breast cancer patients. Social determinants of health such as level of education and municipal district of residence affect the survival of breast cancer cases. Future studies must focus on the effect of childhood social class on the survival times of cancers, which have hitherto only been paid limited attention.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.838-845
• /
• 1999

To determine the prognostic factors for survival of dogs infected with canine parvovirus, clinical and laboratory data of 35 dogs with clinical signs compatible with canine parvoviral enteritis admitted to the Veterinary Medical Teaching Hospital, Seoul National University during the period 1997-1998 were collected. Dogs were grouped by some major covariates, which can be considered as guides to the relative prognosis of dogs in the different subgroups. The Kaplan-Meier survival analysis and Weibull proportional hazard model were used to estimate overall survival, evaluate the comparability between groups, and identify potential prognostic factors. The overall survival rate for all dogs was 45.7% over the study period, and the Kaplan-Meier estimate of one week survival was 0.4989. Gender was the most favorable prognosis ; male dog (median, 6 days) had significantly higher risk of dying than female dog (median, 17 days ; p = 0.0023). In addition to gender, age was significantly associated with survival, with juvenile dogs less than 6-month-old having higher risk (p = 0.0359). Dogs that vaccinated with complete protocol (p = 0.0374) and those of having higher value of mean corpuscular volume (p = 0.0346) were found to be of prognostic importance. The 7 dogs in which white blood cell count of less than 2000 had shorter median survival time (3 days) than the remaining 28 dogs (8 days), but no statistical significance was found between leukopenic and survival. The distribution of packed cell volume and hemoglobin measurement was such that the overall risk of dying in the two groups was comparable. Further studies are needed to more accurately assess these results.

• Wind and Structures
• /
• v.20 no.5
• /
• pp.701-718
• /
• 2015

The joint distribution of wind speed and wind direction at a bridge site is vital to the estimation of the basic wind speed, and hence to the wind-induced vibration analysis of long-span bridges. Instead of the conventional way relying on the weather stations, this study proposed an alternate approach to obtain the original records of wind speed and the corresponding directions based on field measurement supported by the Structural Health Monitoring System (SHMS). Specifically, SHMS of Sutong Cable-stayed Bridge (SCB) is utilized to study the basic wind speed with directional information. Four anemometers are installed in the SHMS of SCB: upstream and downstream of the main deck center, top of the north and south tower respectively. Using the recorded wind data from SHMS, the joint distribution of wind speed and direction is investigated based on statistical methods, and then the basic wind speeds in 10-year and 100-year recurrence intervals at these four key positions are calculated. Analytical results verify the reliability of the recorded wind data from SHMS, and indicate that the joint probability model for the extreme wind speed at SCB site fits well with the Weibull model. It is shown that the calculated basic wind speed is reduced by considering the influence of wind direction. Compared to the design basic wind speed in the Specification of China, basic wind speed considering the influence of direction or not is much smaller, indicating a high safety coefficient in the design of SCB. The results obtained in this study can provide not only references for further wind-resistance research of SCB, but also improve the understanding of the safety coefficient for wind-resistance design of other engineering structures in the similar area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.623-626
• /
• 2005

Toward the practical applications, on operation of conduction-cooled HTS SMES at temperatures well below 77 K should be investigated, in order to take advantage of a greater critical current density of HTS and considerably reduce the size and weight of the system. Recently, research and development concerning application of the conduction-cooled HTS SMES that is easily movement are actively progressing in Korea. Electrical insulation under cryogenic temperature is a key and an important element in the application of this apparatus. Using multi wrapped copper by polyimide film for HIS SMES, the breakdown characteristics of models for turn-to-turn, that is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on breakdown voltage under ac and impulse voltage in $LN_2$ was carried.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.400-420
• /
• 1998

We already know that it is very difficult to obtain an "isolated field" for direct bonding during the surgical exposure of unerupted teeth. The aim of this in-vitro study is to simulate the clinical situation of forced eruption and to evaluate the tensile strengths of preligatured button with several types of contamination which can happen during the surgical exposure of unerupted teeth. Four orthodontic direct bonding systems were used. ($Ortho-One^{TM}$, $Rely-a-Bond^{(R)}$, $Ortho-Two^{TM}$, Phase $II^{(R)}$) Each material was divided into four groups(n=20) : Group 1. (Control, no contamination), Group 2. (Rinse etching agent with saline instead of water), Group 3. (Blood contamination of etched surface for 30 seconds), Group 4. (Blood contamination of primed surface for 30 seconds) 320 bovine anterior permanent teeth were divided into the above mentioned 16 groups. Enamel surface was flattened and ground under water coolant. Pre-ligatured buttons were prepared to the same form. (Cut 0.25 ligature wire 10 cm in length. Twist the ligature wire 30 times clockwise. Mark the wire 15mm and 35mm points from button. Make a loop sticking two points together and twist the loop 6 times counterclockwise.) The bonded specimens were stored at $37^{\circ}C$ saline solution for 3 days. Then the tensile strength of each sample was measured with Instron universal testing machine, crosshead speed of 0.5mm/min. The following results were obtained: 1. As compared to control groups (Group 1) of each material, Rely-a-Bond had a significantly lower mean tensile strengths than other material. (p<0.01) 2. In Group 2. of Ortho-One and Rely-a-Bond, the mean tensile strengths decreased about 7.7% and 11.1%, respectively with statistical significances. (p<0.05) 3. In Group 2. of Ortho-Two and Phase II, the mean tensile strengths did not decrease. 4. In Group 3. of Ortho-One, Rely-a-Bond, Ortho-Two, and Phase II, the mean tensile strengths decreased about 60.8%, 56.1%, 60.2%, and 46.0%, respectively with statistical significances. (p<0.01) 5. In Group 4. of Ortho-One and Rely-a-Bond, the mean tensile strengths did not decrease. 6. In Group 4. of Ortho-Two and Phase II, the mean tensile strengths were decreased about 20.95% and 22.28%, respectively with statistical significances. (p<0.01) There were formations of a hump shaped mass from bonding resin under blood contamination which disturbed direct bonding procedure. According to Reynolds, the proper bond strength for clinical manipulation should be at least 45N or about 4.5Kg.F. According to these results, it can be concluded that Ortho-One could be used during surgical exposure of unerupted teeth. In any case, blood contamination of the etched surface should be avoided, but the blood contamination of primed surface of Ortho-One may not decrease bond strength. Just 'blowing-out' is enough to remove blood from primed surface of Ortho-One. You can verify the clean surface of the primer of Ortho-One after blowing out the blood contamination.