• 복식문화연구
• /
• 제25권4호
• /
• pp.448-457
• /
• 2017

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.89-92
• /
• 2002

편성물은 신축성이 좋으므로 의류용 소재로써 다양하게 사용되어지고 있다. 편성물의 장점으로는 직물과는 달리 루프 형태로 얽힌 편환으로 구성되어 있기 때문에 제편 과정에서 필요한 형태로의 성형이 용이해서 제품의 다양화를 기대할 수 있다. 뿐만 아니라 신축성과 유연성, 다공성, 구김안정성 등이 우수하여 인체의 여러 가지 활동에 따른 구속감이 적으며 인체의 굴곡을 아름답게 나타내어 주는 등의 장점이 있어 의복 소재로써 차지하는 비중이 높다. (중략)

• 복식문화연구
• /
• 제18권1호
• /
• pp.109-117
• /
• 2010

편성물은 여러 가지 형태의 편성 조직을 얻기 위해서 횡편기나 환편기 등의 다양한 니트 편기를 이용하여 다양한 형태의 니트 편환과 조건에 의해서 편성을 하게 된다. 입체적인 형태의 니트 편지는 각기 다른 니트 편환 조직의 병용, 다양한 편사의 이용, 또는 여러 가지 가공공정 등을 거쳐서 얻을 수 있다. 본 연구는 컴퓨터화된 자동 횡편기를 이용하여 편성에 있어서 기본이 되는 조직인 리브편과 펄편의 편성조직을 효과적으로 혼합 편성하여 새로운 형태의 입체 니트구조를 갖는 편지를 개발하는데 그 목적이 있다. 이러한 입체 니트조직을 바탕으로 하여 몇 가지 다른 형태의 입체구조를 갖는 편성물을 개발하고, 새로운 형태의 니트 패션 의복을 제작한다. 또한 리브편과 펄편에 의한 입체 편성조직의 원리와 특성 등에 대하여 논한다.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.378-387
• /
• 2009

This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of $240^{\circ}C$ and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.