• 연구논문집
• /
• 통권30호
• /
• pp.101-110
• /
• 2000

고속 Rapier loom에서 위사를 Insert rapier와 Carrier rapier로서 경사를 상부와 하부로 2구분한 개구속으로 투입하여 경사와 위사의 조직을 완성시키는 위입기구는 스크류 구동방식이다. 이는 래피어와 휠의 치수를 줄이고, 기어와 벨트가 없이 직접 주축에 연결하는 구조이다. 그러므로 래피어가 요구하는 어떠한 가속도 곡선이 가능하여 고속화와 가동률 향상에 최적으로 정확한 설계에의한 래피어 운동이 필수적이다. 따라서 본 연구는 전체 거동의 파악을 위한 시스템의 정확한 해석과 컴퓨터 시뮬레이션을 통한 Rapier loom의 고속화를 목적으로, 위입기구의 해석이론 정립 및 스크류의 회전에 따라 정확한 운동을 유도할 수 있도록 래피어의 변위, 속도 및 가속도 성분의 도출은 물론 동시에 화면상에 구현할 수 있는 스크류기구에 대한 시뮬레이션 프로그램을 개발하는 것이다.

• 연구논문집
• /
• 통권29호
• /
• pp.111-121
• /
• 1999

고속 Rapier loom에서 경사와 위사의 조직을 완성하여 직물을 제직하는 위입과 바듸침 기구는 캠구동 방식으로 동일축선 상에 4개의 캠이 설치되어 있다. 이들 캠들은 2개씩 한쌍을 이루면서 서로 공액운동을 수행하고 있으므로 정확한 설계에 의한 동기화운동이 필수적이다. 따라서 본 연구는 전체 거동의 파악을 위한 시스템의 정확한 해석과 컴퓨터 시뮬레이션을 통한 Rapier loom의 고속화를 목적으로, 위입과 바듸침기구의 곡선선정 및 캠의 회전에 따라 정확한 운동을 유도할 수 있도록 2가지 운동의 연관성은 물론 동시에 화면상에 구현할 수 있는 4개의 캠기구에 대한 시뮬레이션 프로그램을 개발하는 것이다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.63-68
• /
• 2008

The hand of the sensitive mixture fabrics was analysed and discussed with measured mechanical properties of two kinds of woven fabrics according to the characteristics of air-jet loom. The 16 mechanical properties such as tensile, bending, shear, compression and surface were measured using KES-FB system and their differences of the mechanical properties between domestic and foreign looms were analysed with the deviation according to the position of the specimen. And also these mechanical properties according to the domestic and Japan air-jet looms were analysed and discussed with warp and weft insertion tensions during weaving. This research is aiming to make a data base of fabric mechanical properties and, these analysed data are given to weaver as a basic research data related to the effects of loom characteristics to the sensitive mixture fabrics required from weaving fields.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.61-67
• /
• 2001

In this study, the fabrics were woven with worsted grams of Nm 2/72 and the structure of 5 harness satin on rapier and air-jet loom with different weft insertion mechanism and then fabrics were finished in the same processes. Also the physical properties were measured with KES-FB system and discussed with the characteristics of looms for comparing the difference of physical properties of the worsted fabrics which were woven with two different looms under the same structure. Pot shearing and compression properties, then showed similar behavior and the fabric finishing processes were seemed to affect much more than the difference of the loom types. For the surface roughness, the rapier fabrics showed higher irregularity than the air-jet fabrics.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.171-180
• /
• 1989

The automation of textile machinery in the fabric manufacture is strongly demanded in order to improve the industrial structure related to labour-force and cost curtailment, in addition, to keep step with the various and small production system and the consumption tendency requesting a high quality fabrics. In this thesis, the technology applying the computer to an air jet loom and characteristics obtained from it are derived. To efficently apply an automized and unmanned textile machinery, an air jet loom is equipped with the let-off, take-up and weft insertion device attached a central processing unit(CPU) which can automatically operate according to a program. As a result, an air jet loom is available for the factory automation, which has advantages including productivity promotion, high quality security, energy savings, specification & variety, efficient production control, in fabric manufacturing process.

• 연구논문집
• /
• 통권22호
• /
• pp.75-83
• /
• 1992

The beating motion of a high speed shuttleless loom is driven by cams. Two cams become one system and their shaft laid across each other. Moreover, the shape of the cams is very complex and requires high precision for successful weft insertion and good interlacing with warp yarn. The iterative contact method is developed for use in design and analysis of the driving mechanism of a disk type cam with oscillating roller follower. The optimum design is performed by utilizing a CAD program, DISKCAM. The 8th order polynomial is selected to interpolate the desired shape trajectory of the cam, the optimal shape of the cams is defined based on the demension of the follower. The kinematic motion of the beating cam mechanism is investigated. The phase angle is determined to achive harmonious cam motions