• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.81-90
• /
• 2002

Air entrainment of a winding roll with a nip roller was studied numerically. The amount of air entrainment between two rotating rollers was obtained by solving lubrication equation, Reynolds equation, which neglect the existence of a web. However, the numerical model of this study included the web existence, therefore it considered the two lubricating air films between a winding roll and a web and also between a nip roller and the web. The pressure profiles and gap profiles of the two films were obtained by solving lubrication equation for the two air films and force balance equation of the web. Ballooning phenomenon was examined in terms of nip force, wrap angle, web stiffness, web speed, and web tension. This ballooning phenomenon caused by the back flow of the air film blocked by the nip roller. Air entrainment of the two numerical models was compared.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.803-804
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.112-119
• /
• 2004

This paper develops a computer model of a cabover type large truck for estimating the effects of the mounted method of frame on handling performance. The computer model considers two mounted methods of frame; flange mounted and web mounted. Frame is modeled by finite elements using MSC/NASTRAN in order to consider the flexibility of frame. The reliability of the developed computer model is verified by comparing the actual vehicle test results with the simulation results. The actual vehicle test is performed in a double lane change course, and lateral acceleration, yaw rate, and roll angle are measured. To estimate the effects of the mounted method of frame on handling performance, simulations are performed with the flange mounted and web mounted frame. Simulation results show that the web mounted frame＇s variations of roll angle, lateral acceleration, and yaw rate are larger than the flange mounted frame＇s variations, especially in the high test velocity and the second part of the double lane course. Also, simulation results show that the web mounted frame＇s tendencies of roll angle, lateral acceleration, and yaw rate advance the flange mounted frame＇s tendencies, especially in the high test velocity and the second part of the double lane course.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.157-162
• /
• 2005

Web services are key applications in business­to-business, business-to-customer, and enterprise applications integration solutions. As the mobile internet becomes one of the main methods for information delivery, mobile Web Services are regarded as a critical aspect of e-business architecture. In this paper, we proposed a mobile Web Services middleware that converts conventional internet services into mobile Web services. We implemented a WSDL (Web Service Description Language) builder that converts HTML/XML into WSDL and a SAOP (Simple Object Access Protocol) message processor that performs SOAP message handling, chain and handling of server requests. The former minimizes the overhead cost of rebuilding mobile Web Services and enables seamless services between wired and wireless internet services. The latter enhances SOAP processing performance by eliminating the Servlet container (Tomcat), a required component of typical Web services implementation. Our main contributions are to overcome the latency problem of current Web Services and to provide an easy mobile Web service implementation. Our system can completely support standard Web Services protocol, minimizing communication overhead, message processing time, and server overload. Finally we compare our empirical results with those of typical Web Services.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• IE interfaces
• /
• v.18 no.4
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.146-152
• /
• 2017

This paper proposes the ship-handling simulator framework using web technology to solve the complexity and non-scalability problems of a common simulator system. We analyze the essential functions of the existing simulator system, and selects web technologies to replace them. Based on this framework, we implemented core technologies for server and client system, and integrated a prototype of a ship-handling simulator system that can be accessed from a web browser. The prototype has verified that the simulation service can be used by multiple users at the same time without being restricted by time and place through the evaluation test, and it is hoped that it can be applied to various simulation fields in the future.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2016

With the help of a small wearable device, patients reside in an isolated village need constant monitoring which may increase access to care and decrease healthcare delivery cost. As the number of patients' requests increases in simultaneously manner, the web service gateway located in the village hall encounters limitations for performing them successfully and concurrently. The gateway based RESTful technology responsible for handling patients' requests attests an internet latency in case a large number of them submit toward the gateway increases. In this paper, we propose the design tasks of the web service gateway for handling concurrency events. In the procedure of designing tasks, concurrency is best understood by employing multiple levels of abstraction. The way that is eminently to accomplish concurrency is to build an object-oriented environment with support for messages passing between concurrent objects. We also investigate the performance of event-driven architecture for building web service gateway using node.js. The experiments results show that server-side JavaScript with Node.js and MongoDB as database is 40% faster than Apache Sling. With Node.js developers can build a high-performance, asynchronous, event-driven healthcare hub server to handle an increasing number of concurrent connections for Remote Healthcare Monitoring System in an isolated village with no access to local medical care.

• Journal of the Korean Society for information Management
• /
• v.30 no.1
• /
• pp.193-219
• /
• 2013

Public institutions or libraries urgently prepare comprehensive measures to improve web accessibility of their websites as booting web dependability and web utilization of disabled people. The purpose of this study is to propose the design guidelines for improving web accessibility of disabled people. The study, first, analyzed various web accessibility requirements based on web standards, web accessibility guidelines, and the related researches and proposed a web accessibility checklist with 42 requirement. Next, the study evaluated 15 websites of public institutions such as government departments, association of disabled people, and public libraries using the checklist. Finally, the study revealed non-adherence requirements and suggested website design guidelines in terms of contents configuration, sound, colour, keyboard handling, mouse handling, access, image processing, text processing, and code processing.