• 제목/요약/키워드: Weather generator

검색결과 92건 처리시간 0.032초

PSCAD/EMTDC를 이용한 고정속 풍력발전시스템 모델링 및 과도상태 안정화기법 (Fixed speed wind power generation system modeling and transient state stabilization method using PSCAD/EMTDC)

  • 김영주;박대진;;박민원;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1178-1179
    • /
    • 2008
  • This paper describes a modeling of fixed speed wind power generation system which comprise of wind turbine, generator and grid. The wind turbine is based on MOD-2, which is IEEE standard wind turbine, and includes a component using wind turbine characteristic equation. Fixed speed induction generator is directly connected to grid, so the variation of wind speed has effects on the electrical torque and electrical output power. Therefore the power control mode pitch control system is necessary for aerodynamic control of the blades. But the power control mode does not operate at the fault condition. So it is required some methods to control the rotor speed at transient state for stabilization of wind power system. In this paper, simulation model of a fixed speed wind power generation system based on the PSCAD/EMTDC is presented and implemented under the real weather conditions. Also, a new pitch control system is proposed to stabilize the wind power system at the fault condition. The validity of the stabilization method is demonstrated with the results produced through sets of simulation.

  • PDF

기후변화에 따른 유역의 수문요소 및 수자원 영향평가 (Impact Assessment of Climate Change on Hydrologic Components and Water Resources in Watershed)

  • 권병식;김형수;서병하;김남원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회 논문집
    • /
    • pp.143-148
    • /
    • 2005
  • The main purpose of this study is to suggest and evaluate an operational method for assessing the potential impact of climate change on hydrologic components and water resources of regional scale river basins. The method, which uses large scale climate change information provided by a state of the art general circulation model(GCM) comprises a statistical downscaling approach and a spatially distributed hydrological model applied to a river basin located in Korea. First, we construct global climate change scenarios using the YONU GCM control run and transient experiments, then transform the YONU GCM grid-box predictions with coarse resolution of climate change into the site-specific values by statistical downscaling techniques. The values are used to modify the parameters of the stochastic weather generator model for the simulation of the site-specific daily weather time series. The weather series fed into a semi-distributed hydrological model called SLURP to simulate the streamflows associated with other water resources for the condition of $2CO_2$. This approach is applied to the Yongdam dam basin in southern part of Korea. The results show that under the condition of $2CO_2$, about $7.6\% of annual mean streamflow is reduced when it is compared with the observed one. And while Seasonal streamflows in the winter and autumn are increased, a streamflow in the summer is decreased. However, the seasonality of the simulated series is similar to the observed pattern and the analysis of the duration cure shows the mean of averaged low flow is increased while the averaged wet and normal flow are decreased for the climate change.

  • PDF

기후변화가 용담댐 유역의 유출에 미치는 영향 (Impact of Climate Change on Yongdam Dam Basin)

  • 김병식;김형수;서병하;김남원
    • 한국수자원학회논문집
    • /
    • 제37권3호
    • /
    • pp.185-193
    • /
    • 2004
  • 본 연구는 기후변화가 유역의 유출량과 수자원에 미치는 영향을 조사하고 평가하는데 목적이 있다. 이를 위하여 먼저, YONU GCM의 제한실험과 점증실험을 실시하여 전구적 규모의 기후변화 시나리오를 작성하였으며, 통계학적 축소기법과 추계학적 일기발생기법을 이용하여 대상지점의 일 수문기상 시계열을 모의하였다. 이렇게 얻은 시계열자료를 2CO2 상황에서의 유출량자료로 변환하기 위해 준 분포형 강우-유출 모형인 SLURP 모형에 입력하였다. 본 연구에서는 이 방법을 용담댐 유역에 적용하였으며, 그 결과, 기후변화시 연 평균 유출량의 경우 현재상황에 비해 약7.6% 감소하는 것으로 모의되었으며, 계절적으로 볼 때 겨울철과 가을철에는 유출량이 증가하였으나 여름철에는 감소하였다. 그러나, 유출량의 계절적 패턴은 변화가 없는 것으로 모의되었다.

실제 데이터를 이용한 가변속 풍력발전시스템의 출력제어 시뮬레이션 (Output Control Simulation of Variable Speed Wind Power System using Real Data)

  • 한상근;박민원;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.1342-1344
    • /
    • 2002
  • Wind is a significant and valuable renewable energy resource. It is safe and abundant and can make an important contribution to future clean, sustainable and diversified electricity supplies. Unlike other sources of energy, wind does not pollute the atmosphere nor create any hazardous waste. In some countries wind energy is already competitive with fossil and nuclear power even without accounting for the environmental benefits of wind power. The cost of electricity from conventional power stations does not usually take full account of its environmental impact (acid rain, oil slick clean up, the effects of climate change, etc). In this paper, a transient phenomenon simulation method for Wind Power Generation System(WPGS) under real weather conditions has been proposed. The simulation method is expected to be able to analyze easily under various conditions with considering the sort of wind turbine, the capacity of system and the converter system. Wind turbine connected to the synchronous generator and power converter was simulated.

  • PDF

풍력발전기 너셀에 장착된 풍속계를 이용한 출력성능 평가 (Evaluation of Power Performance by Anemometer on WTGS)

  • 김수상;박세광
    • 센서학회지
    • /
    • 제21권4호
    • /
    • pp.303-310
    • /
    • 2012
  • We carried out the power performance evaluation for 1.5 MW${\times}$2 by using anemometer installed on WTGS(Wind Turbine Generator System) in the wind farm at Shi-hwa bang-a-mu-ri. In this paper, we compared and analyzed the performance of guaranteed output and measured output of WTGS which includes output curve, output coefficient, AEP(Annual Energy Product) and availability, etc.. The power performance of WTGS was optimized in the low wind speed sections(3 m/s ~ 10 m/s) and the measured output was more produced by AEP 109 % and availability 112 % than the guaranteed output. In addition, we could also cut the high cost of testing WTGS performance by using anemometer as a substitute for weather mast.

고해상도의 강수변화 시나리오와 CWGEN을 이용한 극한 강우 특성에 관한 연구 (Extreme Event Analysis Using High Resolution RCM Climate Change Precipitation Scenario and CWGEN in Korea)

  • 권현한;김병식;윤석영
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.279-283
    • /
    • 2008
  • 국외를 중심으로 기존 GCM보다 해상도가 높은 Regional Climate Model(RCM)을 이용한 분석이 일부 시행되고 있으나, 국내에서는 이를 이용한 연구가 아직 미비한 실정이다. 이러한 관점에서 본 연구에서는 27km의 해상도를 갖는 기상청 RegCM3 RCM에서 도출된 기후변화 SRES 시나리오 자료를 이용하고자 한다. 수자원의 장기 거동을 강우-유출 모형으로 모사하기 위해서는 입력 자료인 일 강수자료 계열을 모의발생이 필요하며 본 연구에서는 천이확률 및 강수 모의에 이용되는 Gamma 확률분포와 같은 분포형의 매개변수들이 외부 인자 즉 기후변화 시나리오에 따라 조건부로 변동할 수 있는 CWGEN(Cross-validated Canonical Correlation Analysis-Weather Generator) 강수 모의기법을 도입하여 이용하였다. RCM 자료 그 자체는 일반적으로 시 공간적으로 왜곡되어 있어 Quantile Mapping을 통하여 수정을 하였다. 최종적으로 모의된 결과를 바탕으로 기후변화에 따른 극치사상들에 대한 정량적인 거동을 추정하고 평가하였다.

  • PDF

기후변화 시나리오를 고려한 CWGEN 모의기법에 관한 연구 (Analysis on CWGEN Simulation Method Considering Climate Change Impacts)

  • 권현한;김병식;윤석영;배영혜
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.1023-1026
    • /
    • 2008
  • 과거에 수문자료 시계열 모의기법은 수자원시스템 설계에 사용되는 일강수량 모의에 주로 이용되어 왔지만 최근에 기후변화에 따른 수문사상의 변동성을 평가하기 위한 기본 자료 모의를 위한 방법론으로 많이 이용되고 있다. 수문시스템에서 강수는 현상의 발생여부에 따라 건조일과 습윤일이 교대로 반복되는 과정으로 구성되어 있으며 건조일, 습윤일 등으로 구분하고 습윤일의 강수량을 상태별로 분류하여 각 상태별 천이확률을 계산함으로써 장래에 발생 가능한 강수사상의 모의 발생이 가능하다. 기후변화 영향 평가 연구에서 가장 중요한 문제 중의 하나는 기후변화로 기인하는 수문사상의 전체적인 거동의 변동사상을 추정하는 것이며 이를 기존 모형들과 연계시키는 방법이라 할 수 있다. 이러한 관점에서 본 연구에서는 천이확률 및 강수 모의에 이용되는 Gamma 확률분포와 같은 분포형의 매개변수들이 우리가 목적으로 하는 월강수량 또는 계절강수량의 총량을 유사하게 모의할 수 있도록 CWGEN(Cross-validated Canonical Correlation Analysis-Weather Generator)를 도입하였다. 이를 국내 강수 지점을 대상으로 검토 평가하였다.

  • PDF

비래염분 전송 및 RC조 구조물 부착과정에 관한 분석 모델링 제안 (A Proposal of Analysis Modeling on the Transfer and Adhesion of Incoming Salt to RC Structure)

  • 조규환;김우재;안재철;박동천
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 춘계 학술논문 발표대회
    • /
    • pp.91-92
    • /
    • 2012
  • RC structure which is located at shoreline has more serious damages compared with inland structure, because it is directly exposed to chlorine ion which is called incoming salt. In the transmission of incoming salt, differences in transmitted volume of incoming salts could occur according to the influences of local shoreline topography which includes surrounding weather conditions, types of building placements, obstacles of wind tunnel etc. And therefore, for the application of boundary conditions for durable offshore structure design against the salt attack, comparative analysis through wind tunnel test and fluid value simulation are executed in order to investigate the moving and adhesion process of incoming salt to offshore structure.

  • PDF

동력저장장치가 적용된 복합발전시스템의 개발 (Development of combined generation systems that power storage apparatus is applied)

  • 이정일;서장수;강병복;차인수
    • 전기학회논문지P
    • /
    • 제51권4호
    • /
    • pp.169-174
    • /
    • 2002
  • The developments of the solar and the wind power energy are neccessary since the future alternative energies that have no pollution and no limitation are restricted. Currently power generation system of existing problems, combined generation system of photovoltaic(400W) and wind power generation system(400W) was suggested. It combines wind power and solar energy to have the supporting effect from each other. However, weather condition, power compensation device that uses elastic energy of spiral spring to combined generation system was also added for the present study. In an experiment, when output of system gets lower than 12V(charging voltage), power was continuously supplied to load through the inverter by charging energy obtained from generating rotary energy of spiral spring operates in small scale generator.

차량용 밀리파 레이더 시스템의 개발 (Development of Millimeter wave Radar System for an Automobile)

  • 박홍민;이규한;최진우;신천우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
    • /
    • pp.25-28
    • /
    • 2001
  • This paper introduce a millimeter-wave radar system. As Fig 1 shows, This system consists of millimeter-wave radar front-end and digital signal processing parts through receive waves regarding up-coming obstacles. The system works as follow process; (1) Generate regular tripodal waves using the FMCW pulse generator (2) Transmit/Receive waves regarding up-coming obstacles (3) Analog filtering (4) FIFO memory interface (5) FFT(Fast Fourier Transform) (6) Calculation of distance / speed between cars (7) Object display and calibration. We have progress to solve the problem like as increase of traffic accidents causing damage and injuries due to the increased number of motor vehicles and long distance driving, and Need for a device to help drivers who are in trouble due to bad weather conditions. We are expect to Take the lead as a core technology in the ITS industry and to develop circuit and signal processing technologies related to millimeter-wave bandwidth.

  • PDF