• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.675-678
• /
• 2002

In order to develop the water hammering cleaner system for removing scale and slime in inner metal or non-metal piping wall, the flow characteristics are investigated by numerical and experimental methods. The air bubbles in the piping systems as a shock wave are formed and transferred with the water flow in the piping. The governing equations are derived from making using of three-dimensional Wavier-Stokes equations with the standard $k-{\varepsilon}$ turbulence model and SIMPLE algorithm. Pressure distributions in the pipeline are calculated for different air supply pressures. Also, we prepared some experimental results of the pressure differences for various air supply times.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.123-126
• /
• 2002

Very frequently the compressible flow in an extinction nozzle of gas circuit breaker is simulated under no arc assumption, which can be reasonable for both high and low current breakings. In the present study, computations are performed to investigate the major features of the compressible flows inside the arc extinction nozzle of gas circuit breaker. A fully implicit finite volume scheme is applied to solve the two-dimensional, steady, compressible, Wavier-Stokes equations. The computed results are validated with the previous experimental data available. Several types of turbulence models are explored to reasonably predict the complicated flows inside the arc extinction nozzle. The obtained results show that the shock wave boundary layer interaction inside the nozzle significantly influences the whole performance of the gas breaker.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.703-709
• /
• 2002

In the present paper, approximate coordinate transformations for simulation of turbulent flows with wall deformation, significantly reducing computational cost with little degradation in numerical accuracy, are presented. The Wavier-Stokes equations are coordinate-transformed with an approximation of Tailor-series truncation. The performance is evaluated by performing numerical simulations of a channel flow at Re$\sub$$\tau$/ = 140 with active wall motions of η$\sub$m/$\^$+/ $\leq$5. The approximate transformations provide flow structures as well as turbulence statistics in good agreement with those from a complete transformation [Phys. Fluids 12, 3301 (2000) ] and allow 25-30% savings in the CPU time as compared to the complete one.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.366.2-366
• /
• 2002

Unsteady flow characteristics and associated blade tonal noise of a cross-flow fan are predicted by a computational method. The incompressible Wavier-Stokes equations are time-accurately solved for obtaining the pressure fluctuations between the rotating blades and the stabilizer, and sound pressure is predicted using Curie's equation. The computed fan performance is favorably compared with experimental data, and also indicates that the performance is not significantly altered by the random pitch effect at ø〉0.4. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.334.1-334
• /
• 2002

In this study, a cross-flow fan system used in indoor unit of the split-type air conditioner is analyzed by computational simulation. A commercial CFD code - Fluent - is used to calculate the performance and its unsteady flow characteristics. The unsteady incompressible Wavier-Stokes equations are solved using a sliding mesh technique on the interface between rotating fan region and the outside. The acoustic pressure is calculated by using Ffowcs-Williams and Hawkings equation. (omitted)

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.223-227
• /
• 2005

최근 전산 유체의 발달로 이상 유동해석의 캐비테이션 모델 적용 방법이 발전되어 왔으나 다양한 수력학적 시스템에서 발생하는 캐비테이션 유동은 난류이며 물과 공기 사이에서의 복잡한 상호 작용을 가지고 있으므로 그 적용 예가 아직은 미흡한 상태이다. 본 연구에서는 수중에서의 캐비테이션 해석과 이상 유동 해석을 위한 코드 개발 및 검증을 목적으로 3차원 회전체 주위의 캐비테이션 유동을 여러 가지 조건들의 변화를 적용하여 해석하였다. 또한 캐비테이션 발생과 관련한 다른 난류 모델에 적용하여 비교 분석을 수행하였다. 해석을 위한 모델의 지배방정식은 이상유동 Wavier-Stokes 방정식, 질량$\cdot$모멘텀 방정식의 혼합된 형태로 구성되어 있으며 방정식의 해를 구하기 위한 방법으로 유한차분법을 이용하였다. 해석결과의 신뢰성을 고려하여 반구형 실린더 주위의 캐비테이션 유동의 실험치와 비교 분석하였다. 그 결과, 본 연구의 수치 해석 방법과 실험적 방법의 결과가 강한 양의 상관관계를 가짐을 알 수 있었으며, 이러한 수치적 뒷받침은 본 연구의 전산수치 해석 방법이 앞으로의 여러 유동 해석으로의 적용 가능성을 보여준다.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.21-24
• /
• 2005

Numerical analysis were made for the unsteady flow fields of the rotor system of a Tilt-Rotor aircraft in cruise mode. The Reynolds-averaged thin-layer Wavier-Stokes equations were discretized by Roe's upwind differencing scheme and integrated in time by the LU-SGS algorithm. The computational domain of the rotor system was constructed by seven multi-block Chimera grids. Comparison of pressure coefficient on the surface of the main wing and blades were made for 3cases of advance ratio(0.325, 0.350, 0.375) and thrust and power coefficients for the rotor were compared with experimental data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.69-76
• /
• 2004

In this paper, an efficient inverse design method for nose shape of submerged body based on the MGM(Modified Garabedian-McFadden) design method has been developed. The MGM design method is a residual-correction technique, in which the residuals are differences between the desired and the computed pressure distributions. 3-D incompressible Wavier-Stokes equation was adopted for obtaining the surface pressure distribution and combined with the MGM design method to perform the inverse design of nose shape of submerged body. The design method was verified by applying to several airfoil shapes. Improved design shapes could be obtained when the method was applied to nose shapes of submerged body.

• Journal of computational fluids engineering
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2003

Three-dimensional endwall flow within a linear cascade passage of high performance turbine blade is simulated with a 3-D Wavier-Stokes CFD code (MOSA3D), which is based on body-fitted coordinate system, pressure-correction and finite volume method. The endwall flow characteristics, including the development and generation of horseshoe vortex, passage vortex, etc. are clearly simulated, consistent with the generally known tendency. The effects of both turbulence model and convective differencing scheme on the prediction performance of endwall flow are systematically analyzed in the present paper. The convective scheme is found to have stronger effect than the turbulence model on the prediction performance of endwall flow. The present simulation result also indicates that the suction leg of the horseshoe vortex continues on the suction side until it reaches the trailing edge.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.11
• /
• pp.527-532
• /
• 2005

During the last ten years the new interruption techniques, which use the arc energy itself to increase the pressure inside a chamber by the PTFE nozzle ablation, have displaced the puffer circuit breakers due to reduced driving forces and better maintainability. In this paper, we have investigated the thermal flow characteristics inside a thermal puffer type gas circuit breaker by solving the Wavier-Stokes equations coupled with Maxwell's equations for considering all instabilities effects such as turbulence and Lorentz forces by transient arc plasmas. These relative inexpensive computer simulations might help the engineer research and design the new interrupter in order to downscale and uprating the GIS integral.