• Composites Research
• /
• v.20 no.3
• /
• pp.31-36
• /
• 2007

A quantitative prediction method for initial crack length in a carbon/epoxy (CF/EP) composite beam using active piezoelectric transducers was established in this study. Wavelet Transform (WT)-based signal processing and identification technique in time-frequency domain was developed to facilitate the determination of damage presence and severity. Dynamic response of a CF/EP composites beam containing a continuously expanding crack, coupled with a pair of active piezoelectric disks, was examined under a narrow band excitation, and then applied with the proposed signal processing technique.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.34-41
• /
• 2001

In an IMBE (Improved Multi-band Excitation) speech coder, initial pitch estimation occupies most of the total computing time for the coder due to complex cost function and exhaustive search over candidate pitches. Future frames in initial pitch estimation cause inevitable time delay. Therefore, it is difficult to implement a real-time coder. Furthermore, unvoiced frames use the unnecessary pitch estimation as in the voiced frames. In this paper, each frame is determined voiced or unvoiced by Dyadic Wavelet Transform (DyWT) and, then, initial pitch estimation is performed only for voiced frame. Therefore different pitch estimation algorithms are employed between voiced and unvoiced frames incurring reduced time delay at transmitter and receiver. Simulation result show that the relative complexity of initial pitch estimation is reduced by 23％, and the processing time decreases down to 1/10 ∼ 1/1l of the IMBE coder while speech quality is almost maintained.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.21-29
• /
• 1996

Industrial equipment, such as power plant, is required to operate reliably, continuously and economically under rather severe conditions of temperature, stress, and enbironment. To test structural integrity and fitness, ultrasonic nondestructive testing is used because of effectiveness and simplicity. In this paper, wavelet transform based least mean square(LMS) algorithm is applied to reduce the influence of the interference occurring between randomly positioned small scatters. The RUN test is performed to check the nonstationarity of the speckle noise signal. The performance of this new approach is compared with that of the time domain LMS algorithm by means of condition numbers, signal-to-noise ratio and 3-D image. As a result, the wavelet transform based LMS algorithm shows better performance than the time domain LMS algorithm in this experiment.

• Structural Engineering and Mechanics
• /
• v.26 no.3
• /
• pp.315-341
• /
• 2007

A sudden change of stiffness in a structure, associated with the events such as weld fracture and brace breakage, will cause a discontinuity in acceleration response time histories recorded in the vicinity of damage location at damage time instant. A new damage index is proposed and implemented in this paper to detect the damage time instant, location, and severity of a structure due to a sudden change of structural stiffness. The proposed damage index is suitable for online structural health monitoring applications. It can also be used in conjunction with the empirical mode decomposition (EMD) for damage detection without using the intermittency check. Numerical simulation using a five-story shear building under different types of excitation is executed to assess the effectiveness and reliability of the proposed damage index and damage detection approach for the building at different damage levels. The sensitivity of the damage index to the intensity and frequency range of measurement noise is also examined. The results from this study demonstrate that the damage index and damage detection approach proposed can accurately identify the damage time instant and location in the building due to a sudden loss of stiffness if measurement noise is below a certain level. The relation between the damage severity and the proposed damage index is linear. The wavelet-transform (WT) and the EMD with intermittency check are also applied to the same building for the comparison of detection efficiency between the proposed approach, the WT and the EMD.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.486-493
• /
• 2002

In this paper, we proposed the effective multispectral image compression method using CIBP(classified interband bidrectional prediction) and extended SPIHT(set partition in hierarchical trees) in wavelet domain. We determine separately feature bands that have the highest correlation with other bands in the visible range and in the infrared range of wavelengths. Feature bands are coded to remove the spatial redundancy with SPIHT in the wavelet domain. Prediction bands that have high correlation with feature bands are wavelet transformed and they are classified into one of three classes considering reflection characteristics of the baseband. For Prediction bands, CIBP is performed to reduce the spectral redundancy. for the difference bands between prediction bands and the predicted bands, They are ordered to upgrade the compression efficiency of extended SPIHT with the largest error magnitude. The arranged bands are coded to compensate the prediction error with extended SPIHT. Experiments are carried out on the multispectral images. The results show that the proposed method reconstructs higher quality images than images reconstructed by the conventional methods at the same bit rate.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.427-430
• /
• 2005

In this paper, we propose a new post-processing method, based on the theory of the projection onto convex sets (POCS) to reduce the blocking artifacts in decoded images. We propose a new smoothness constraint set (SCS) and its projection operator in the wavelet transform (WT) domain to remove unnecessary high-frequency components caused by blocking artifacts. We also propose a new method to find and preserve the original high frequency components of the image edge. Experimental results show that the proposed method can not only achieve a significantly enhanced subjective quality, but also have the PSNR improvement in the output image.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.158-162
• /
• 2003

The PVDF(polyvinylidene fluoride) film sensor as one of smart sensors has good characteristics to detect the impact damages of composite structures. The capabilities of the PVDF film sensor for evaluating impact behaviors and damages of Gr/Ep laminates subjected to low-velocity impact were examined. From sensor signals, the specific wave-forms implying the damage were detected. The wavelet transform(WT) and Short Time Fourier Transform(STFT) were used to decompose the piezoelectric sensor signals in this study. The impact behaviors of Gr/Ep laminates were simulated and the impact forces were reconstructed using the sensor signals. Finally, the impact damages were predicted by finite element analysis with the reconstructed forces. For experimental verification, a series of low-velocity impact tests from low energy to damage-induced energy were carried-out. The extent of damage in each case was examined by means of ultrasonic C-scan and the measured damage areas were agreed well with the predicted areas by the F.E.A.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.13-16
• /
• 2008

본 논문은 가중퍼지소속함수 기반신경망(neural network with weighted fuzzy membership functions, NEWFM)기반의 자동 특징 추출기법을 사용하여 인체의 세 방향에서 발생하는 가속도 값으로부터 낙상을 탐지하는 방안을 제시하고 있다. 10명의 피검자로부터 8가지 시나리오로 낙상/비낙상 데이터 800개를 수집하고 웨이블릿 변환(wavelet transform, WT)을 통해 추출한 계수중 비중복면적 분산법에 의해 중요도가 가장 낮은 특징입력을 하나씩 제거하면서 최소의 특징 입력을 선택하였다. 특징입력으로는 가속도 값을 웨이블릿 변환한 11개의 d4계수들 중 비중복면적 분산법에 의해서 중요도가 가장 높은 5개의 계수가 사용되었고, 이들 특징입력을 통해 93%의 전체 분류율을 나타내었다.

• Composites Research
• /
• v.16 no.3
• /
• pp.58-67
• /
• 2003

To perform the realtime strain and fracture monitoring of the smart composite structures, two optical fiber sensor systems are proposed. The two types of the coherent sources were used for fracture signal detection - EDFA with FBG and EDFA with Fabry-Perot filter. These sources were coupled to EFPI sensors imbedded in composite specimens. To understand the characteristics of matrix crack signals, at first, we performed tensile tests using surface attached PZT sensors by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as short time Fourier transform (STFT) and wavelet transform (WT) for the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes. And, from the test of tensile load monitoring using optical fiber sensor systems, measured strain agreed with the value of electric strain gage and the fracture detection system could detect the moment of damage with high sensitivity to recognize the onset of micro-crack fracture signal.

• Composites Research
• /
• v.24 no.6
• /
• pp.49-55
• /
• 2011

The use of advanced composite materials in main structures of military and civil aircraft has been increased rapidly because of their considerable metals in high specific strength and stiffness. However, the mechanical properties of composite materials may severely degrade in the presence of damage. Especially, the high-velocity impact such as a hailstorm, and a small piece of tire or stone during high taxing, can cause considerable damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single sensor or any conventional methods. In this paper, the PVDF sensors and AE sensors were used for monitoring high-velocity impact damage initiation and propagation in composite laminates. The WT(wavelet transform) is used to decompose the sensor signals. In the PVDF sensor and AE sensor signal analysis, amounts of high-frequency signals are increased when the impact energy is increased. PVDF sensor and AE sensor signal appeared similar results. This study shows how various sensing techniques can be used to characterize high-velocity impact damage of advanced composite laminates.