• 제목/요약/키워드: Waveform control

검색결과 564건 처리시간 0.031초

아리랑1호 위성 ETB의 전도성 전자파 환경 시험결과 분석 (A Analysis on the Result of CE/CS Test on the KOMPSAT-I ETB)

  • 임성빈;천용식
    • 한국전자파학회논문지
    • /
    • 제12권2호
    • /
    • pp.184-192
    • /
    • 2001
  • 본 논문에서는 아리랑 1호 개발단계에서 위성의 전기/전자적 기능 시험을 수행하기 위해 개발 모델로 구성된 Electrical Test Bed(ETB) 플랫폼에서 수행한 전도성 방출 및 전도성 감응시험 결과를 분석하였다. 전도성 전자파환경시험은 전력공급장지(Power control unit)로부터 위성을 구성하고 있는 각각의 하드웨어와DC 전원을 공급하기 위하여 스위치가 동작하는 순간, 전력 및 신호선을 통하여 전달하게 될 노이즈의 순시 파형을 시간 영역에서 측정하고, 모든 하드웨어에 전력이 공급되어 정상상태로 동작하는 동안에 발생하는 노이즈특성을 시간영역과 주파수 영역에서의 스펙트럼을 10 Hz에서 100hz까지 스캐닝하여 그 레벨을 측정하여 결과를 분석한 결과를 이용하여 6 dB이상의 시스템 마진을 더한 결과를 노이즈 소스로 공급하여 하드웨어의 오동작 및 하드웨어의 손상이 없음을 검증하였다. 본 시험은 아리랑 1호 위성의 공동개발을 수행한 미국 TRW 사의 위성체 조립시험장에서 수행되었다.

  • PDF

다수 개 디스크 PZT 를 이용한 밸브리스 압전펌프의 연동구동 파형에 관한 연구 (A study on the peristaltic waveform of valveless PZT pump using disk type multi PZTs)

  • 함영복;박중호;윤동현;김한석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1824-1827
    • /
    • 2005
  • For application to micro fluid control systems such as ${\mu}TAS$ (Micro Total Analysis Systems) and DDS (Drug Delivery Systems), it is very significant to handle precise and minute flow rates with low pressure pulsation. In this study, a novel valveless piezoelectric pump using peristaltic motion with three disk type PZT actuators is presented. The newly devised pump with an effective size of $70mm{\times}60mm{\times}55mm$ has three actuator layers connected in series from inlet to outlet. The PZT actuator has a maximum displacement of 240 ${\mu}m$ and a maximum force of 1.6 N. When the driving voltage for PZT actuators is sequentially applied with a certain phase shift, the pumping is performed by peristaltic motion of liquid volume. The working fluid is shut off without the driving voltage. Three methods for sequential driving are proposed and experimentally investigated. First and second methods utilize an intermittent sinusoidal waveform with phase shift of $90{\circ}\;and\;120^{\circ}$, respectively. Third method uses a rectangular waveform with phase shift of $90^{\circ}$. A controller with multi-phase shifter is designed and fabricated. Then, frequency and voltage-flow rate characteristics and load pressure-flow rate characteristics are experimentally investigated to verify the validity of the developed pump.

  • PDF

Feeding behaviors of Cacopsylla pyricola (Hemiptera: Psyllidae) using electrical penetration graphs (EPGs)

  • Park, Min-Woo;Kwon, Hay-Ri;Yu, Yong-Man;Youn, Young-Nam
    • 농업과학연구
    • /
    • 제43권2호
    • /
    • pp.194-204
    • /
    • 2016
  • The pear psylla, Cacopsylla pyricola, is a very small sap-feeding insect of many commercial pear varieties that could be considered the most serious insect pest of pear. Detailed information on plant penetration activities of the pear psylla is essential to study its feeding behavior used to evaluate resistant traits to chemical control. The application of the electrical penetration graph technique (EPG) could provide a relevant insight into the nature of this resistance. EPG waveforms of C. pyricola were characterized on the basis of amplitude, frequency, voltage level, and electrical origin. Feeding behaviors of C. pyricola were recorded and analyzed by EPG analysis. During EPG monitoring, waveform PA occurred at the start of stylet penetration of pear leaf epidermal cell. Waveform PB followed, in which stylet secreted saliva was observed. Waveforms PC1 and PC2 involved penetrating and sucking behaviors in parenchyma cells and vascular parenchyma, respectively. In addition, waveform PC1 represented salivation into bundle sheath cells and ingestion from parenchyma. Otherwise, behaviors of salivation into phloem and ingestion from phloem produced waveforms PE1 and PE2, respectively. On the other hand, ingestion from xylem tissues showed waveform PG. Among the feeding patterns of C. pyricola described above, phloem feeding patterns occurred most frequently, followed by xylem feeding and parenchyma penetration patterns in descending order.

멀티펄스의 진폭보정에 관한 연구 (A Study on Compensation of Amplitude in Multi Pulse)

  • 이시우
    • 한국산학기술학회논문지
    • /
    • 제12권9호
    • /
    • pp.4119-4124
    • /
    • 2011
  • 유성음원과 무성음원을 사용하는 멀티펄스 음성부호화 방식에 있어서, 음성신호의 진폭이 증가하거나 감소하는 경우에 음성 파형에 일그러짐이 나타난다. 이것은 대표구간의 멀티펄스를 피치구간마다 복원하는 과정에서 재생 음성신호가 정규화되는 것이 원인으로 작용한다. 이것을 해결하기위하여 본 논문에서는 피치구간마다 멀티펄스의 진폭을 보정하는 방법(AC-MPC)을 제시하였으며, 기존의 MPC와 멀티펄스 진폭을 보정한 AC-MPC의 SNRseg를 평가한 결과, AC-MPC의 남자음성에서 0.7dB, 여자음성에서 0.7dB 개선된 것을 확인할 수 있었다. 결국, MPC에 비해 AC-MPC의 SNRseg가 개선되어 음성파형의 일그러짐을 제어할 수 있었으며, 본 방법은 셀룰러폰이나 스마트폰과 같이 Low Bit Rate의 음원을 사용하여 음성신호를 부호화하는 방식에 활용할 수 있을 것으로 기대된다.

임펄스 유사 신호 복사에 적합한 비발디 안테나 설계 (Design of Vivaldi Antenna suitable for Impulse-like Waveform Radiation)

  • 이두진;고봉진
    • 한국정보전자통신기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.59-66
    • /
    • 2024
  • 본 논문에서는 임펄스 유사 신호 복사를 위한 안테나 설계 방법에 대하여 기술하였다. 임펄스 유사 신호의 스펙트럼은 수GHz의 대역을 가지는 파형으로 안테나의 설계도 광대역에 걸쳐 동작할 수 있도록 설계됨과 동시에 근거리 임펄스 레이더 응용에 활용되기 위해서는 시영역에서의 복사 펄스를 반영한 설계가 필요하다. 시영역에서의 복사 펄스 특성을 반영한 비발디 안테나를 설계하였고 안테나의 특성을 주파수 영역 및 시영역에서 검증하였다. 설계된 안테나는 약 1.8GHz에서 10GHz 이상의 광대역을 거쳐 동작함을 확인할 수 있으며 안테나의 입력임피던스는 1GHz 이후부터 10GHz까지 광대역에 걸쳐 100 Ω에 유사한 값으로 안정적으로 수렴함을 측정 및 시뮬레이션을 통해 확인할 수 있다. 전방향으로 복사되는 파형의 특성을 시영역에서 30도 간격으로 확인하였으며 안테나로부터 복사되는 파형은 지향성을 가짐을 확인하였다. 본 연구의 결과는 근거리 탐지 응용분야와 같은 지표투과레이더 설계에 활용 가능할 것으로 보인다.

작은 정현파입력의 50% Duty Ratio 디지털 클럭레벨 변환기 설계 (Design of digital clock level translator with 50% duty ratio from small sinusoidal input)

  • 박문양;이종열;김욱;송원철;김경수
    • 한국통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.2064-2071
    • /
    • 1998
  • 휴대용 기기에서 자체 발진하여 클럭원으로 사용되는 TCXO의 출력과 같은 작은 진폭(400mV)의 정현파 입력을 내부 논리회로의 클럭원으로 사용하기 위한 파형정형 및 50%의 듀티 비(duty ratio)의 출력을 가지는 새로운 디지털 클럭레벨 변환기를 설계, 개발 하였다. 정, 부 두 개의 비교기, RS 래치, 차아지 펌프, 기준 전압 발생기로 구성된 새로운 신호 변환회로는 출력파형의 펄스 폭을 감지하고, 이 결과를 궤환루프로 구성하여 입력 비교기 기준 전압단자로 궤환시킴으로서 다지털 신호레벨의 정확한 50%의 듀티 비를 가진 출력을 생성할 수 있다. 개발한 레벨변환기는 ADC등의 샘플링 클럭원, PLL 또는 신호 합성기의 클럭원으로 사용할 수가 있다. 설계는 $0.8\mu\textrm{m}$ double metal double poly analog CMOS 공정을 사용하고, BSIM3 model을 사용하였으며, 실험결과 370mV의 정현파 입력율 50 + 3%의 듀티 비를 가진 안정된 논리레벨 출력 동작특성을 얻을 수 있었다.

  • PDF

Blood Pressure Simulator using An Optimal Controller with Disturbance Observer

  • Kim, Cheol-Han;Han, Gi-Bong;Lee, Hyun-Chul;Kim, Yun-Jin;Nam, Ki-Gon;SaGong, Geon;Lee, Young-Jin;Lee, Kwon-Soon;Jeon, Gye-Rok;Ye, Soo-Young
    • International Journal of Control, Automation, and Systems
    • /
    • 제5권6호
    • /
    • pp.643-651
    • /
    • 2007
  • The various blood pressure simulators have been proposed to evaluate and improve the performance of the automatic sphygmomanometer. These have some problems such as the deviation of the actual blood pressure waveform, limitation in the blood pressure condition of the simulator, or difficulty in displaying the blood flow. An improved simulator using disturbance observer is proposed to supplement the current problems of the blood pressure simulator. The proposed simulator has an artificial arm model capable of feeding appropriate fluids that can generate the blood pressure waveform to evaluate the automatic sphygmomanometer. A controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. To minimize the external fluctuation of pressure applied to the artificial arm, a disturbance observer was designed on the plant. A hybrid controller combined with a proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid controller indicated that even though the former showed good control performance without disturbance, it was affected by the disturbance signal induced by the cuff. The latter exhibited an excellent performance under both situations.

SPWM 구동 방식을 이용한 단상 풀 브리지 인버터의 전압 제어에 대한 연구 (A Study on the Voltage Control of a Single Phase Full-bridge Inverter using SPWM Driving Method)

  • 고윤석
    • 한국전자통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.851-858
    • /
    • 2017
  • 본 연구에서는 SPWM 구동방식의 단상 풀 브리지 인버터의 전압제어계를 설계하였다. 전압제어계는 단상 풀-브리지 인버터, 출력전압과 기준전압의 오차를 선형적으로 보상하기 위한 PI 제어기, 제어기 신호로부터 SPWM 방식을 이용하여 게이트 신호를 발생시키기 위한 PWM 구동회로, 인버터 출력 전압 파형을 정현 파형으로 필터링하기 위한 LC 필터로 구성하였다. 끝으로, EMTP-RV를 이용하여 PWM 구동방식을 기반으로 하는 단상 풀-브리지 인버터의 전압 제어계를 모델링하였고 수개의 기준전압에 대한 시뮬레이션 연구를 통해 출력전압이 정확하게 기준전압을 수렴하는 것을 확인함으로서 제어계 설계의 유효성을 확인할 수 있었다.