• 제목/요약/키워드: Wave propagation speed

검색결과 226건 처리시간 0.025초

다상흐름 모형을 이용한 산사태 유발 수면충격파 3차원 수치모의 (3D numerical modeling of impact wave induced by landslide using a multiphase flow model)

  • 김병주;백중철
    • 한국수자원학회논문집
    • /
    • 제54권11호
    • /
    • pp.943-953
    • /
    • 2021
  • 호수, 저수지, 만 등의 사면에서 발생하는 산사태 및 토석류에 의해 유발되는 수면충격파의 전파는 복잡한 지형 조건에서 토석류와 물 흐름이 상호작용하는 3차원 자연현상이다. 이 연구에서는 3차원 다상 난류 흐름 해석을 위한 수치모형과 비뉴튼 유체인 토석류에 대한 유변학적 모형을 적용하여 만의 사면에서 발생한 산사태로 인한 수면충격파의 거동을 수치모의하였다. 수치해석 결과를 타 연구자의 수리실험 자료와 비교 분석하여 3차원 수치모형의 적용성을 평가하였다. 수면으로 유입되는 토석류의 선단부 두께와 유속이 적절히 모의 된다면, 수면충격파의 정점부가 솟구치는 높이와 수면형은 매우 우수한 정확도로 예측이 가능한 것으로 나타났다. 토석류의 초기 형상을 다르게 설정한 두 가지 수치해석 결과는 연직상향으로 솟구친 수면충격파가 최고점에 도달한 후 중력에 의해 하강하면서 감쇄되는 단계에서부터 상이해지는 것으로 나타났다. 토석류 초기 두께를 상대적으로 크게 설정한 수치모의 결과는 만을 가로지르는 수면형과 함께 반대편 사면에서의 쳐오름 현상까지 양호하게 실험자료를 재현할 수 있는 것으로 나타났다. 반대편 사면에 도달한 수면충격파가 사면을 거슬러 흐르는 최고 쳐오름 높이는 토석류 총량이 같은 경우 수면으로 유입되는 토석류의 초기 두께에 민감하지 않은 것으로 나타났다. 한편, 수로 바닥을 따라 전파되는 토석류의 전파 특성을 더 정확하게 재현하기 위해서는 실험에서 점토 성분이 없는 입자만을 이용하여 재현한 토석류 물질 특성에 맞는 유변학적 모형을 적용할 필요가 있다고 판단된다.

Computational Study on Unsteady Mechanism of Spinning Detonations

  • Matsuo, Akiko;Sugiyama, Yuta
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 학술대회
    • /
    • pp.367-373
    • /
    • 2008
  • Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. Activation energy is used as parameter as 10, 20, 27 and 35, and the specific heat ratio and the heat release are fixed as 1.2 and 50. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable pitch at Ea=10, periodical unstable pitch at Ea=20 and 27 and unstable pitch consisting of stable, periodical unstable and weak modes at Ea=35, respectively. In the weak mode, there is no Mach leg on the shock front, where the pressure level is much lower than the other modes. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of these stable and unstable modes. In the stable pitch at Ea=10, the maximum pressure history on the tube wall remained nearly constant, and the steady single Mach leg on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the periodical unstable pitch at Ea=20 and 27 of the maximum pressure history. The high frequency was one cycle of a self-induced oscillation by generation and decay in complex Mach interaction due to the variation in intensity of the transverse wave behind the shock front. Eventually, sequential high frequency oscillations formed the low frequency behavior because the frequency behavior was not always the same for each cycle. In unstable pitch at Ea=35, there are stable, periodical unstable and weak modes in one cycle of the low frequency oscillation in the maximum pressure history, and the pressure amplitude of low frequency was much larger than the others. The pressure peak appeared after weak mode, and the stable, periodical unstable and weak modes were sequentially observed with pressure decay. A series of simulations of spinning detonations clarified that the unsteady mechanism behind the shock front depending on the activation energy.

  • PDF

Computational Study on Unsteady Mechanism of Spinning Detonations

  • Matsuo, Akiko;Sugiyama, Yuta
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년 추계학술대회논문집
    • /
    • pp.367-373
    • /
    • 2008
  • Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. Activation energy is used as parameter as 10, 20, 27 and 35, and the specific heat ratio and the heat release are fixed as 1.2 and 50. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable pitch at Ea=10, periodical unstable pitch at Ea=20 and 27 and unstable pitch consisting of stable, periodical unstable and weak modes at Ea=35, respectively. In the weak mode, there is no Mach leg on the shock front, where the pressure level is much lower than the other modes. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of these stable and unstable modes. In the stable pitch at Ea=10, the maximum pressure history on the tube wall remained nearly constant, and the steady single Mach leg on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the periodical unstable pitch at Ea=20 and 27 of the maximum pressure history. The high frequency was one cycle of a self-induced oscillation by generation and decay in complex Mach interaction due to the variation in intensity of the transverse wave behind the shock front. Eventually, sequential high frequency oscillations formed the low frequency behavior because the frequency behavior was not always the same for each cycle. In unstable pitch at Ea=35, there are stable, periodical unstable and weak modes in one cycle of the low frequency oscillation in the maximum pressure history, and the pressure amplitude of low frequency was much larger than the others. The pressure peak appeared after weak mode, and the stable, periodical unstable and weak modes were sequentially observed with pressure decay. A series of simulations of spinning detonations clarified that the unsteady mechanism behind the shock front depending on the activation energy.

  • PDF

직선형 핀틀 노즐의 길이비에 따른 정상상태와 비정상상태 특성 연구 (Steady and Unsteady State Characteristics of Length Effects about Linear Pintle Nozzle)

  • 정기연;강동기;정은희;이대연;김덕현
    • 한국추진공학회지
    • /
    • 제22권3호
    • /
    • pp.28-39
    • /
    • 2018
  • 본 연구에서는 추력조절용 핀틀 노즐의 길이비에 따른 정상상태와 비정상상태 특성을 파악하기 위해 수치해석을 수행하였다. 노즐과 핀틀의 영역은 분리하여 격자를 생성하고 중첩격자기법을 사용하였다. 핀틀 형상은 길이비에 따라 5가지로 선택하였고, 정상상태 해석결과 핀틀의 길이가 길수록 추력과 추력계수가 높게 나타났다. 비정상상태 해석의 경우 핀틀의 속도에 따라서 연소실 압력 경향이 달라지며 추력과 유동구조에 영향을 미친다. 노즐 출구에서의 추력은 노즐목 단면적 변화에 빠른 응답특성을 보이며, 추력과 추력계수 등 성능 주요 인자들의 예측시 핀틀의 구동 속도와 핀틀 거동에 의한 연소실 압력파의 전달속도를 고려해야 한다.

수중 통신에 적합한 CSMA기반 매체접근제어 프로토콜 연구 (Performance analysis of CSMA based MAC protocols for underwater communications)

  • 송민제;장윤선
    • 전기전자학회논문지
    • /
    • 제22권4호
    • /
    • pp.1068-1072
    • /
    • 2018
  • 지상의 무선 통신 환경과 비교하여 수중 환경은 전력제한, 긴 전파지연, 낮은 전송율, 큰 전파손실 등 통신에 불리한 많은 제약적인 특성들이 존재한다. 전파의 신호 감쇠가 심하여 상대적으로 전송 손실이 낮은 음파를 이용하여 통신하게 되는데 음파의 수중 속도는 약 1,500m/s로 지상의 전파속도에 비해 매우 느린 속도를 가진다. 따라서, 지상 통신을 위해 제안된 기존의 MAC 프로토콜들은 바로 수중 통신에 적용될 수 없고 수중 환경에 적합하게 새로운 설계가 필요하다. 본 논문은 무선망의 대표적인 CSMA 기반 MAC 프로토콜들에 대해 수중 환경에서 그 성능을 비교 분석하여 수중통신에 적합한 MAC 프로토콜 설계를 위한 중요 고려 사항들을 제시하였다. 분석결과, 수중환경에서는 제어 패킷의 개수가 MAC 프로토콜의 성능에 큰 영향을 미친다는 것을 알 수 있었고, 이 결과는 수중 통신에 최적인 새로운 MAC 프로토콜을 제안하는 연구들에 기초 자료로 이용될 수 있을 것이다.

무선 PAN 시스템을 위한 효율적인 채널 사운딩 기법 (An Efficient Channel Sounding Method for WPAN System)

  • 조주필
    • 한국인터넷방송통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.9-14
    • /
    • 2008
  • 본 논문에서는 Wireless PAN을 위한 MIMO-OFDM시스템에서 근거리 데이터 전송과 더불어 주변장치간 원활한 통신을 위해 채널 sounding 기법을 제안한다. 제안된 기법은 전력 확산 지연을 통해서 임펄스 응답의 지속시간을 파악하며, 감쇠 특성을 갖는 전력 지연 프로 파일(power delay profile) 모델링 하였고, ML(maximum likelihood) 기법으로 채널 응답 계수를 얻었다. Channel sounding 기법을 통해 측정한 크기, 위상, 지연의 변수 값으로 송신단과 수신단간의 채널 전파 특성이 측정 된다. 이 측정된 채널 정보들이 수신단에서 채널 상태를 파악하며, 수신단에서 이 채널 정보를 근거로 통신 링크 성능 향상과 신뢰성을 증대시킬 수 있는 기법을 제안하였다.

  • PDF

Prediction of the Dependence of Phase Velocity on Porosity in Cancellous Bone

  • Lee, Kang-Il;Choi, Min-Joo
    • The Journal of the Acoustical Society of Korea
    • /
    • 제27권2E호
    • /
    • pp.45-50
    • /
    • 2008
  • In recent years, quantitative ultrasound (QUS) technologies have played a growing role in the diagnosis of osteoporosis. Most of the commercial bone somometers measure speed of sound (SOS) and/or broadband ultrasonic attenuation (EUA) at peripheral skeletal sites. However, the QUS parameters are purely empirical measures that have not yet been firmly linked to physical parameters such as bone strength or porosity. In the present study, the theoretical models for wave propagation in cancellous bone, such as the Biot model, the stratified model, and the modified Biot-Attenborough (MBA) model, were applied to predict the dependence of phase velocity on porosity in cancellous bone. The optimum values for the input parameters of the three models in cancellous bone were determined by comparing the predictions with the previously published measurements in human cancellous bone in vitro. This modeling effort is relevant to the use of QUS in the diagnosis of osteoporosis because SOS is negatively correlated to the fracture risk of bone, and also advances our understanding of the relationship between phase velocity and porosity in cancellous bone.

차분격자볼츠만법에 의한 저Mach수 영역 edge tone의 유체해석 (Fluid analysis of edge Tones at low Mach number using the finite difference lattice Boltzmann method)

  • 강호근;김정환;김유택;이영호
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 춘계 학술대회논문집
    • /
    • pp.113-118
    • /
    • 2004
  • This paper presents a two-dimensional edge tone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle by the finite difference lattice Boltzmann method (FDLBM). We use a new lattice BGK compressible fluid model that has an additional term and allow larger time increment comparing the conventional FDLBM, and also use a boundary fitted coordinates. The jet is chosen long enough in order to guarantee the parabolic velocity profile of the jet at the outlet, and the edge consists of a wedge with an angle of $\alpha=23^0$. At a stand-off distance $\omega$, the edge is inserted along the centreline of the jet, and a sinuous instability wave with real frequency f is assumed to be created in the vicinity of the nozzle and th propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations result from periodically oscillation of jet around the edge. That pressure fluctuations propagate with the sound speed. Its interaction with the wedge produces an irrotational feedback field which, near the nozzle exit, is a periodic transverse flow producing the singularities at the nozzle lips. The lattice BGK model for compressible fluids is shown to be one of powerful tool for computing sound generation and propagation for a wide range of flows.

  • PDF

Real-Time Water Wave Simulation with Surface Advection based on Mass Conservancy

  • Kim, Dong-Young;Yoo, Kwan-Hee
    • International Journal of Contents
    • /
    • 제4권2호
    • /
    • pp.7-12
    • /
    • 2008
  • In this paper, we present a real-time physical simulation model of water surfaces with a novel method to represent the water mass flow in full three dimensions. In a physical simulation model, the state of the water surfaces is represented by a set of physical values, including height, velocity, and the gradient. The evolution of the velocity field in previous works is handled by a velocity solver based on the Navier-Stokes equations, which occurs as a result of the unevenness of the velocity propagation. In this paper, we integrate the principle of the mass conservation in a fluid of equilateral density to upgrade the height field from the unevenness, which in mathematical terms can be represented by the divergence operator. Thus the model generates waves induced by horizontal velocity, offering a simulation that puts forces added in all direction into account when calculating the values for height and velocity for the next frame. Other effects such as reflection off the boundaries, and interactions with floating objects are involved in our method. The implementation of our method demonstrates to run with fast speed scalable to real-time rates even for large simulation domains. Therefore, our model is appropriate for a real-time and large scale water surface simulation into which the animator wishes to visualize the global fluid flow as a main emphasis.

Bullet Train of Giant Nonlinear Internal Waves from Luzon Strait

  • Liu, Cho-Teng;Hsu, Ming-Kuang;Chen, Hsien-Wen;Wang, Dee-Way;Chyou, Yuan-Jie;Lee, Chang-Wei
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.934-937
    • /
    • 2006
  • In the northeastern South China Sea (SCS), fast westward moving (about 2.9 m/s) non-linear internal waves (NLIWs) are emanated nearly daily from the Luzon Strait. Their propagation speed is faster than NLIWs previously observed in the deep water of world oceans, their amplitude of 140 m or more is the largest free propagating NLIWs so far observed in the deep ocean. These NLIWs energized the top 1500 m of the water column, heaving it up and down in 20 min. Their associated energy density and energy flux are the largest observed to date. During 2005 and 2006 experiment, they were found west of the HengChun Ridge (HCR) that links Luzon and Taiwan Islands. This coincides with founding in satellite images, no NLIW front was found east of HCR. But, the turbulent environment east of HCR may prohibit surface signature of NLIWs that were emanated from sills between Batan Islands. The relative contribution of the two ridges on NLIW in Luzon Strait is still under study.

  • PDF