• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.415-429
• /
• 2017

This paper focuses on the impact of the wave passage effect on the long-span bridge. In order to make the wave passage effect more obvious, ground motion samples are selected from the near-fault ground motion of the 1999 Chi-Chi earthquake and an arch bridge with a 280m main span is selected as a bridge sample. The motion ground samples are divided into two groups according to the characteristics of near-fault. A sequence of fragility curves is developed. It is shown that the seismic damage is increased by the wave passage effect and the increase is more obvious in the near-fault ground motion.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.467-468
• /
• 2006

To perform the comparative study, we experimented on two differential epitaxial structures, the conventional Metamorphic High Electron Mobility Transistor (MHEMT) using the InAlAs/InGaAs structure and the InP-composite channel MHEMT adopting the InAlAs/InGaAs/InP/n-InP structure. Compared to the conventional MHEMT, the InP-composite channel MHEMT shows improved breakdown performance; over about 3.5 V. This increased breakdown voltage can be explained by the lower impact ionization coefficient of the InP-composite channel MHEMT than that of the conventional MHEMT.

• Earthquakes and Structures
• /
• 제27권2호
• /
• pp.155-164
• /
• 2024

Studying the propagation characteristics of waves in circular plates has important engineering value. In this paper, graphene sheet reinforced foam (GPLRMF) circular plates are taken as the research object, and the propagation characteristics of shear and bending waves in the structure are analyzed. In the process of research, we assume that the material properties are closely related to temperature, and use the first-order shear deformation theory (FSDT) to establish the dynamic model of GPLRMF circular plates. Considering the simply supported boundary conditions, the relationship between phase velocity/group velocity and wave number was obtained through Laplace transform. Subsequently, the influence of material and geometric parameters on wave propagation characteristics was analyzed, and the results showed that the porosity coefficient and temperature had a significant impact on the characteristics of wave propagation in circular plates.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.715-722
• /
• 2012

A structural health monitoring (SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal (TR) and inverse filtering (IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.106-109
• /
• 2000

Impact tester was build up to evaluate the characterization of CFRP laminate plates under the low velocity impact. The tests were conducted on several laminates of different ply orientation A system was budded for the impact strength of CFRP laminates in consideration of stress wave propagation theory using drop-weight impact tester as one of impact test. Results indicate that absorbed energy of quasi-isotropic specimen having four interfaces is higher than that of orthotropic laminates with two interfaces. Also the damage area was measured with ultrasonic C-scanner on some samples. In the specimens the relationship was linear between damaged area and absorbed energy to some degree. Absorbed energy in the specimen that ply number, interface number and fiber stacking sequences is same but having hybrid is higher than that of orthotropic laminates without hybrid.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.306-315
• /
• 2010

대규모 해상풍력 개발이 예상되고 있는 가운데, 이러한 대규모 단지개발을 위해서는 사전 환경영향평가가 매우 중요하다. 해상풍력단지 개발 후보지 중 하나인 전북 위도 부근 해역에서의 파랑 관측 자료를 토대로 파랑추산 모형을 검증하고, 해상풍력터빈을 위한 직경 5 m의 모노파일 기초 35기 설치시 파랑 거동에 미치는 영향을 검토하였다. 파랑추산 모형의 유의파고 계산 결과, 관측자료와의 RMS 오차가 0.35 m 정도로 재현성이 우수함을 확인하였으며, 터빈이 설치되는 경우 파고 감쇠율이 1% 미만으로 영향이 거의 없음을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.418-424
• /
• 2015

This paper is about the bow structure design of the ship-typed and turret moored FPSO which is subjected to the bow-flare slamming load in harsh North Sea environments. Quad 204 FPSO project involves the redevelopment of the existing Schiehallion FPSO which is damaged by impact wave loads. Normally all offshore systems including FPSO are designed to withstand the 100 year storm I.e. the storm that happens once every hundred years at the location where the system is installed. Several incidents have revealed that impact loading is important issue for moored floating production systems. In this paper, the design impact loads are estimated considering the ship owner’s specification, measured data from model tests, requirements of the classification society rules and results of numerical simulation analyses. The impact pressure by numerical analysis is 1.8 times greater than required value by CSR adopted by IACS. Based on the selected design load, plastic design formulae allowing the local material yielding are applied for the initial scantling of the bow structure. To verify the structural integrity, FE analyses are carried out considering the local area subjected to the impact wave loads. Their results such as structural arrangement, design loads and scantlings are shown and discussed. It is found that plastic design formulae in adopting Initial design phase give sufficiently conservative results in terms of structural strength.

• Smart Structures and Systems
• /
• 제6권2호
• /
• pp.147-165
• /
• 2010

Impact damage detection in composite structures has gained a considerable interest in many engineering areas. The capability to detect damage at the early stages reduces any risk of catastrophic failure. This paper compares two advanced signal processing methods for impact location in composite aircraft structures. The first method is based on a modified triangulation procedure and Genetic Algorithms whereas the second technique applies Artificial Neural Networks. A series of impacts is performed experimentally on a composite aircraft wing-box structure instrumented with low-profile, bonded piezoceramic sensors. The strain data are used for learning in the Neural Network approach. The triangulation procedure utilises the same data to establish impact velocities for various angles of strain wave propagation. The study demonstrates that both approaches are capable of good impact location estimates in this complex structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.403-404
• /
• 2010

본 논문에서는 큰 시험체 크기와 많은 충격에너지를 필요로 하는 섬유보강 시멘트 복합재료의 충격 실험을 수행하기 위한 새로운 종류의 충격시험 장비를 제안하였다. 제안한 충격시험장치는 위치에너지나 운동에너지를 사용하는 기존 충격시험와 달리 선형변형에너지를 사용하고, 기존의 다른 충격시험장비와 비교하여 크기가 훨씬 작고 경제적이며 안전하다.