• 한국해안·해양공학회논문집
• /
• 제26권6호
• /
• pp.397-404
• /
• 2014

우리나라의 항만정온도 검토 방법에는 이상 시 항내정온도 검토와 항만가동율 검토 등이 있으며 대부분의 경우에 두 가지 방법을 모두 수행하고 있다. 전자에서는 정온도 기준을 합리적인 근거가 없는 항내파고 절대치로 판단하고 있는 문제점이 있으며 그 실효성에도 의문이 제기된다. 후자에서는 초과출현율 파 또는 장기간의 실측 및 역추산 자료의 파향-주기군을 사용하여 항만가동율을 산정하는 방법 등이 사용되고 있는데 이들 중 초과출현율 파의 사용은 정확도에 문제가 있으므로 장기간 자료를 사용하는 것이 바람직하다. 또한, 현재 적용되는 하역한계파고의 기준은 너무 단순하여 실제 상황을 반영하는데 한계가 있다. 본 논문에서는 부산항 신항에서 관측한 파고 실측자료를 사용하여 현행 항만정온도 및 항만가동율 검토방법의 문제점을 실질적으로 입증하였으며 실측자료의 중요성을 강조하였다. 향후 우리나라 주요 항만 내 외에서 장기간의 실측 자료를 확보함으로써 개선된 항만정온도 기준을 마련하는데 적극적으로 활용하는 것이 바람직하다.

• 한국해안해양공학회지
• /
• 제5권2호
• /
• pp.76-83
• /
• 1993

Miche의 쇄파기준을 활용하여 쇄파 발생시에도 적용할 수 있는 파낭모형을 제시하였고 이 모형을 근간으로 하여 천해역에서의 방향성 파낭 Spectrum에 쇄파로 인한 에너지 소산을 도입할 수 있는 기법을 개발하였다. 본 연구에서 제안된 기법의 타당성을 검증하기 위하여 천해성에서 shear current, upwelling current와 조우하는 방향성 Wallops 파랑 spectrum에 적용하였다.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.399-408
• /
• 1999

Copeland’s(1985) hyperbolic mild-slope equation including diffraction refraction and reflection in the wave field is used as a governing equation in this study. The result of Maruyama & Kajima(1985) is used to calculate wave direction and that of Watanabe & Maruyama(1986) is used as a energy dissipation formula. Numerical solutions are obtained by the Leap-Frog scheme and compared with Watanabe & Maruyama’s (1984) hydraulic experimental results and numerical simulation results for the detached breakwater. This wave model is applied to a detached breakwater and compared with Watanabe and Maruyama’s (1984) hydraulic model results to check the characteristics of reflected wave field around a detached breakwater. The distribution of wave height and we phase in front of a detached breakwater is more accurate than the Watanabe and Maruyama’s numerical results. The results from our wave model show good agreements with the others and also show nonlinear effects around the detached breakwater. This model is applied to the Gamcheon harbor of pusan. the field observations were carried out at Pusan harbor wave station in 1986-1995 and the results were accepted as a design wave condition in this study. The wave height and wave period was measured by Dong-A university at one station in the Gamcheon harbor in 1996-1997 and used as a calibration criterion. The measured data were used as input data for the numerical simulation and also compared with simulated results. The numerical simulation shows a fairly good results which considering the effect of topographic characteristics and effect of narrow entrance due to two separated breakwaters in Gamcheon harbor. The wave distribution characteristics inside Gamcheon harbor is quite different with the offshore wave direction and wave period.

• 한국해안·해양공학회논문집
• /
• 제28권3호
• /
• pp.117-123
• /
• 2016

동해에서 주로 겨울철에 발생하며 파고가 크고 주기가 긴 너울성 고파의 주요 특성 중 하나는 잔잔한 상태에서 갑자기 파가 커지는 돌발성이다. 본 연구에서는 이러한 돌발성을 나타내기 위하여 돌연고파라는 용어를 도입하였다. 돌연고파의 기준을 제안하기 위하여 강릉과 왕돌초에서 2005년부터 8년간 관측된 파랑자료와 같은 기간동안 강원도와 경상북도 연안에서 발생했던 해상 사고 기록을 비교하였다. 그 결과 ${\Delta}(H^2L)/{\Delta}t$가 상위 20% 값인 $88.6m^3/hr$ 이상일 때 대부분의 사고 기록과 일치하는 것으로 나타나 이를 돌연고파의 기준으로 제안하였다. 사용된 변수는 한 파장당 파랑 에너지의 단위시간당 증가율을 나타내며, 고파의 파고 및 주기뿐만 아니라 돌발성도 포함한다.

• 한국해안·해양공학회논문집
• /
• 제34권6호
• /
• pp.315-324
• /
• 2022

2차원 조파수조 내에서 취득된 규칙파 실험데이터를 머신러닝 기법으로 분석하여 천수 변형을 경험한 파랑으로부터 조파기의 입력파고를 예측하는 모델을 수립하고 그 성능을 검증하였다. 이를 위해 가장 대표적인 머신러닝 기법인 인공신경망(NN)과 비모수 회귀분석 방법 중 하나인 가우시안 과정 회귀(GPR) 모델을 각각 수립하고 두 모델의 예측 성능을 비교하였다. 전체 실험자료를 모두 한꺼번에 활용한 경우와 쇄파 발생 여부에 따라 자료를 구분한 경우에 대해 독립적으로 분석을 수행하였다. 데이터를 구분하지 않은 경우에는 NN 및 GPR 모델 모두 조파기 입력파고 값과 계측값 사이의 오차가 비교적 크게 나타났다. 반면에 데이터를 비쇄파 및 쇄파 조건으로 구분하면 조파기 입력파고의 예측 정확도가 크게 향상되었다. 두 모델 중에서는 NN 모델보다 GPR 모델의 성능이 전반적으로 더 우수한 것으로 나타났다.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.529-537
• /
• 2006

International Maritime Organization (IMO) is planning to include the Alternative Assessment of the Weather Criterion in the new Intact Stability (IS) Code to be revised. In this study, the procedure of the model test in the Interim Guidelines was reviewed by carrying out the model test and analyzing the test results. For this purpose, RO/RO passenger ship whose ratios of breadth to draft and the height of weight to draft were above 3.5 and above 0.6 respectively was selected as a test ship. Drifting test and motion test in regular waves were performed to estimate the hydrodynamic heeling lever and roll-back angle. Motion tests in waves were carried out in the three wave steepness conditions to measure roll-back angle and examine the feasibility of so called, the Three-step method. Using the test data, satisfaction of the Weather Criterion was assessed for the test ship by using the alternative method and compared with the current method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2002

The purpose of this paper is to design a pick-up for the small form factor optical disk drive and to fabricate a micro-compensatory lens for the pick-up using the micro-compression molding process. At design stage, the optical elements including the objective lens and the compensatory lens are miniaturized. The height of pick-up and free working distance are designed as 2mm and 0.2% respectively. To analyze the fabricated micro-compensatory lens, the system was analyzed using the surface profile of the fabricated micro-compensatory lens and CODE V which is commercial software. The RMS wave front aberration of the system using fabricated micro-compensatory lens is 0.01677λ which is lower than Marechal's criterion, 0.07λ.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.17-28
• /
• 2001

The wheelhouse front glass of a Fore-Bridge-Ship (Ro-Ro Ship) was broken by the shipping of water in rough seas, and then the flooding of seawater into the wheelhouse caused the uncontrollable condition of the ship. The hull which was entered into the floating condition rolled severely, and the heavy rolling caused secondary damage such as the collapse of a lot of cargo. It was an incredible accident because the height of bow freeboard was about 2.5 times higher than the standard height of minimum bow freeboard regulated by the International Load Line Convention(1966). And it would be also difficult for navigators to imagine a great deal of seawater flooding into the wheelhouse because the front glass was positioned at about 20m height above the sea surface. In this paper, we carried out the evaluation for the safety navigation of the Fore-Bridge-Ship numerically against ship's speed and encountering angle to the wave in each sea state of rough sea, by using the integrated seakeeping performance index (ISPI) which is able to evaluate synthetically the safety operation of ships. And then the problem on the application of the past criteria proposed as the safety navigation of a merchant ship was clarified by inquiring the dangerousness of the shipping of water at her bow deck, which caused the breakage of the wheelhouse front glass.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.101-107
• /
• 2022

Dean (1965) proposed the use of the root mean square error (RMSE) in the dynamic free surface boundary condition (DFSBC) and kinematic free-surface boundary condition (KFSBC) as an error evaluation criterion for wave theories. There are well known wave theories with RMSE more than 1%, such as Airy theory, Stokes theory, Dean's stream function theory, Fenton's theory, and trochodial theory for deep-water waves. However, none of them can be applied for deep-water breaking waves. The purpose of this study is to provide a closed-form solution for deep-water waves with RMSE less than 1% even for breaking waves. This study is based on a previous study (Shin, 2016), and all flow fields were simplified for deep-water waves. For a closed-form solution, all Fourier series coefficients and all related parameters are presented with Newton's polynomials, which were determined by curve fitting data (Shin, 2016). For verification, a wave in Miche's limit was calculated, and, the profiles, velocities, and the accelerations were compared with those of 5^th-order Stokes theory. The results give greater velocities and acceleration than 5^th-order Stokes theory, and the wavelength depends on the wave height. The results satisfy the Laplace equation, bottom boundary condition (BBC), and KFSBC, while Stokes theory satisfies only the Laplace equation and BBC. RMSE in DFSBC less than 7.25×10^-2% was obtained. The series order of the proposed method is three, but the series order of 5^th-order Stokes theory is five. Nevertheless, this study provides less RMSE than 5^th-order Stokes theory. As a result, the method is suitable for offshore structural design.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.115-123
• /
• 1994

Under variable amplitude loading conditions, retardation or accelerated condition of fatigue crack growth occurs with every cycle, Because fatigue crack growth behavior varied depend on load time history. The modeling of stress amplitude with storm loading acted to ships and offshore structures applied this paper. The crack closure behavior examine by recording the variation in load-strain relationship. By taking process mentioned above, fatigue crack growth rate, crack length, stress intensity factor, and crack closure stress intensity factor were obtained from the stress cycles of each type of storm ; A(6m), B(7m), C(8m), D(9m), E(11m) and F(15m) which was wave height. It showed that the good agreement with between the experiment results and simulation of storm loads. So this estimated method of crack propagtion rate gives a good criterion for the safe design of vessels and marine structure.