• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.197-200
• /
• 2002

In this paper, roll damping coefficients for a non-conventional cross section, which is herein named as 'step' model, are investigated numerically and experimentally. Experiments are extensively carried out to estimate the roll damping coefficients. Numerical estimations are also made with the help of numerical codes. For convenience, the roll damping is divided into wave-making component and viscous component. The wave-making component is determined using a potential code and the viscous component using a viscous flow code, in which the fluid domain is taken as unbounded. In order to validate the present approach, a typical cross section with bilge is considered and our results are compared with published data. The comparison shows a good agreement qualitatively. For the step model, numerical results are compared well with experimental data besides some quantitative discrepancies at a certain range of frequency. It is thought that the discrepancy might be caused by the ignorance of the free surface in viscous computations. It is found in the case of the step model that not only the viscous component but also the wave component increases considerably compared to the section with bilge.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.41-53
• /
• 2006

This experimental study investigated the flow characteristics for regular waves passing a rectangular floating structure in a two-dimensional wave tank. The particle image velocimetry (PIV) was employed to obtain the velocity field in the vicinity of the structure. The phase average was used to extract the mean flow and turbulence property from repeated instantaneous PIV velocity profiles. The mean velocity field represented the vortex generation and evolution on both sides of the structure. The turbulence properties, including the turbulence length scale and the turbulent kinetic energy budget were investigated to characterize the flow interaction between the regular wave and the structure. The results shaw the vortex generated near the structure corners, which are known as the eddy-making damping or viscous damping. However, the vortex induced by the wave is longer than the roll natural period of the structure, which presents the phenomena opposing the roll damping effect; that is, the vortex may increase the roll motion under the wave condition longer than the roll natural period.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.138-144
• /
• 2004

Pneumatic damping through a orifice type duct for OWC type wave energy device is studied experimentally. Forced oscillation tests are made to measure chamber pressure and velocity of air flaw through orifice. Pneumatic damping coefficient are deducted from the experimental research, and discussion are made far the influence of frequency, heave amplitude, and orifice size. Finally two formula are proposed for the estimation of non-dimensional pneumatic damping coefficient by regression analysis. The proposed formula proves to be a reliable method far practical application.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.8-14
• /
• 2004

Pneumatic damping through an orifice-type duct for an OWC-type wave energy device is studied experimentally. Forced oscillation tests are used to measure chamber pressure and velocity of air-flow through an orifice. Pneumatic damping coefficients are deducted from the experimental research, and the influence of frequency, heave amplitude, and orifice size are discussed. Finally, two formulas are proposed for the estimation of non-dimensional pneumatic damping coefficient by regression analysis. The proposed formula proves to be a reliable method for practical application.

• 대한조선학회지
• /
• 제23권2호
• /
• pp.21-26
• /
• 1986

An analysis is made of hydrodynamic forces acting horizontally on a two-dimensional cylinder, when it is exposed to incident waves and consequently undergoes a swaying motion in shallow water. Applying the method of matched asymptotic expansions the added mass, wave damping and the wave exciting force are obtained in terms of the difference in potential across the cylinder in a simple manner. The potential jump is related to the so-called blockage coefficient which is determined purely from geometry. It is found that the wave damping coefficient can not exceed the blockage coefficient.

• 충청수학회지
• /
• 제35권2호
• /
• pp.137-147
• /
• 2022

In this paper, we considered the Dirichlet initial boundary value problem of a nonlinear viscoelastic wave equation with nonlinear damping and source terms, and investigated finite time blow-up phenomena of the solutions to the equation with arbitrary positive initial data, under suitable conditions.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.65-73
• /
• 1997

본 연구는 부유식 파랑제어구조물의 계류방식을 말뚝계류식으로 하여 종래의 부유식 파랑제어구조물의 파랑제어기능을 보완하고, 친수성 구조물로 이용할 수 있는 다용도 구조물의 개발을 목표로 하고 있다. 본 연구에서는 부유체의 계류장치에 초기반력을 작용시킴으로써 발생하는 파랑제어 효과의 개선과 부유체의 동요제어 효과를 수치계산법을 통하여 논의하였다. 이 때 계류부에서 발생하는 비선형 마찰력을 선형모델화하는 이론을 전개한 다음 수치계산 및 실험값을 통하여 본 수치모델의 적용성에 관하여 논의한 결과 양호한 일치성을 보였다. 또한, 파랑제어 효과 및 부유체의 동요저감 효과를 동시에 만족할 수 있는 초기반력에 관하여 논의하였다.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.10-15
• /
• 2012

선형의 천수방정식을 이용하여 에너지 감쇠가 있는 경우의 파랑특성을 분석하였다. 기하광학기법을 이용하여 위상속도 및 에너지속도를 이론적으로 유도하였으며 수치모형을 통하여 검증하였다. 에너지감쇠가 있는 경우 파고, 위상속도, 에너지속도 모두 변하면서 파랑변형에 영향을 끼쳤다. Euler 의 접근법에 의하여 복소수 형태의 파수를 사용할 경우 에너지 감쇠가 클수록 위상속도는 감소하는 반면에 에너지속도는 위상속도보다 큰 값을 가지면서 꾸준히 증가하는 결과가 나왔다. Lagrange의 접근법에 의하여 복소수 형태의 각주파수를 사용할 경우 에너지 감쇠가 발생하는 파군이 에너지속도로 전파하는 사실을 확인할 수 있었다. 또한 파랑의 천수와 굴절이 발생하는 경우 두 경우 다 에너지속도의 영향을 받는 것을 이론으로 발견하였고, 경사면 위로 파랑이 전파하는 경우 이 사실을 수치실험으로 확인하였다.

• 한국추진공학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2007

연소 안정화를 위해 로켓엔진 연소기에 장착될 수 있는 반파장 음향 공명기의 비선형 음향 감쇠 특성을 비선형 해석을 통해 조사하였다. 먼저, 공명기가 장착되지 않은 기본 연소실에 대해 넓은 범위의 진폭($80{\sim}150$ dB)을 갖는 음향 가진에 대한 연소실의 감쇠 거동을 조사한 결과, 진폭에 따라 연소실의 감쇠인자가 증가하며 125 dB 이상의 진폭에 대해서는 비선형 거동이 뚜렷이 나타남을 알았다. 반파장 공명기가 장착된 연소기에서의 계산 결과, 해당 공명기의 최적 동조조건은 진폭에 무관하였고, 높은 진폭의 압력파를 감쇠하는 기능은 유지되지만, 상대적으로 음향 공명기로서의 역할은 약화됨을 알 수 있었다.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.63-78
• /
• 1994

This paper deals with the treatment of the open boundary in two-dimensional free-surface wave problems. Two numerical schemes are investigated for the implementation of the open boundary condition. One is to add the artificial damping term to the dynamic free-surface boundary condition, in which the determination of suitable damping coefficient and the damping zone is the most important. The other is a modified Orlanski's method, which is known to be very useful for the uni-directional waves. Using these two schemes, numerical tests have been conducted for a few typical free-surface wave problems. To obtain the numerical solution of the free-surface boundary value problem, the fundamental source-distribution method is used and the fully nonlinear free-surface boundary conditions are applied. The computed results are presented in comparison with those of others for the proof of practicality of these two schemes.