• Journal of Advanced Marine Engineering and Technology
• /
• 제17권5호
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.526-534
• /
• 2019

The average coastline and the erosion control line introduced as the management coastline, and the average shoreline (MSL) was established from the observed coastline. Also, the median grain size and the wave height of 30-years return period were applied. The erosion control line (ECL) was established through the model, HaeSaBeeN. These two lines set the coastline for evaluation. Based on the observed monitoring data along the coastline, the 1-day variation according to the normal distribution was used to estimate the regional variation, and the width of the erosion was calculated by applying the median grain size (D₅₀) and the wave height of 30-years return period through the high-wave coastal erosion width model, i.e., HaeSaBeeN.

• 드라이브 ㆍ 컨트롤
• /
• 제11권1호
• /
• pp.1-7
• /
• 2014

This paper presents a novel concept of wave energy converter for electric generation from the ocean wave energy. In this paper, a Multi-Point Absorbing Wave Energy Converter, shortened as MPAWEC by using Secondary Control Hydrostatic Transmission (SCHST) was proposed. The power take-off (PTO) system in the proposed MPAWEC includes multi heaving buoys to drive hydraulic pumps placed at different points. The application of SCHST in MPAWEC gives some advantages, such as longevity of hydraulic components; more energy is harvested; the variation of the pressure in the accumulator limited; therefore the accumulator volume is reduced and the output speed is more stable, etc. A PID controller was designed for speed control of the hydraulic motor. The simulation results indicated that the speed of the generator was ensured with the relative error as 0.67%; the efficiency of the proposed system was 71.4%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.317-322
• /
• 2001

This study depicts an experimental work of the impulsive wave discharged from the open end of several kinds of right-angle bend pipes, which are attached to the open end of a simple shock tube. The weak normal shock wave with its magnitude of Mach number from 1.03 to 1.20 is employed to obtain the impulsive wave propagating outside the open end of the bend pipes. The experimental data of the magnitude of the impulsive wave and its propagation directivity are analyzed to characterize the impulsive waves discharged from the right-angle bend pipes and compared with those from a straight pipe. The results obtained show that a right-angle miter bend considerably reduces the magnitude of the impulsive wave and its directivity toward to the pipe axis, compared with the straight pipe. It is believed that the right angle miter bend pipe can playa role of passive control against the impulsive wave.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.112-120
• /
• 2021

The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.394-404
• /
• 2015

This study investigated the pharmacodynamics of betaine on the blood profile and short chain fatty acid levels in meat ducks exposed to heat wave. 400 heads of Cherry valley (Anasplatyrhynchos) meat ducks were completely randomized to 5 treatments (4 repetitions each), and were raised for 42 days. They were grouped into T1 (heat wave control group without betaine), T2 (betaine 400 ppm), T3 (betaine 800 ppm), T4 (betaine 1200 ppm), and T5 (normal control group without betaine). Compared to T1, the betaine addition groups showed higher body weight gain at shipment, with T3 showing the highest significant difference. For hematological indictors measured (red blood cells and platelets), the betaine addition groups showed significantly higher values than the heat wave control group. The pH of the former was lower but their electrolytes ($K^+$, $P^+$, and $Cl^-$) were significantly higher compared to the latter. For blood gas concentration, the former showed a significantly higher value than the latter. For the total short chain fatty acids, acetic acid, and propionic acid, the betaine addition groups and group fed broiler-high temperature diet showed higher values than the heat wave control group. On the other hand, the former showed significantly lower values in butyric acid, isobutyric acid, valeric acid, and isovaleric acid than the latter group. These results suggest that betaine has the pharmacodynamics that mediate heat stress, via the maintenance and control of the blood profile, osmotic pressure, gas concentration, and short chain fatty acid, of meat ducks under heat wave.

• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.193-199
• /
• 2013

파랑 중 선박의 직진성능을 시뮬레이션을 통하여 비교 검토하였다. 시뮬레이션을 구성하기위해 선박의 3자유도 조종운동방정식을 사용했으며, 선박에 가해지는 파랑강제력은 3차원 특이점 분포법을 사용하여 계산하였다. 시뮬레이션의 외란으로서 규칙파와 불규칙파를 사용하였고 최대사용타각과 제어시간지연을 제어기의 제한조건으로 설정하였다. 조종성능에 따른 직진성능을 검토하기 위해 유체력 미계수를 인위적으로 변화시킴으로서 조종성능이 다른 선박의 시뮬레이션을 구성하였다. Autopilot제어기를 사용한 일정시간의 선박의 직진 시뮬레이션을 수행하고 해당시간동안의 직진거리를 비교하여 선박의 직진성능을 검토하였다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.470-475
• /
• 2019

본 논문에서는 진동수주형(OWC: Oscillating Water Column) 파력발전시스템을 위한 30kW 급 계통연계형 PCS(Power Conversion System)을 다룬다. 해양에너지 중 파력 발전은 삼면이 바다인 반도의 특성을 지닌 한국에 적용하기 적합하고 연안재해 시 파력 발전기가 방파제 역할을 하여 피해를 감소시킬 수 있고, 다른 해상 발전과 개발 대상 적지가 일치하므로 통합하여 효율을 증대 시킬 수 있다. 파력발전 방식은 작동 원리에 따라 가동 물체형과 진동수주형, 월파형 등 여러 형태로 구분하며, 설치 형태에 따라 고정식과 부유식으로 구분된다. 본 논문에서는 구조적으로 안정되고 터빈과 발전기의 유지 보수가 비교적 쉬운 진동수주형을 채택하여, 파력발전용 30kW 계통연계형 PCS 토폴로지 및 모델을 제안하고 계통에 안정적으로 전압을 공급할 수 있는 DC link 전압 제어 등 계통연계 시 필요한 제어방법에 대해 설명하였다. 또한 이를 검증하기 위해 시뮬레이션을 수행하였다.

• 한국해안·해양공학회논문집
• /
• 제30권6호
• /
• pp.326-336
• /
• 2018

항만 및 연안 시설물의 연안방재 계획 수립을 위해서는 우리나라 연안에서 장기간 연속 관측된 파랑자료가 필수적이다. 이를 위해 기상청, 국립해양조사원, 해양수산부의 연안파랑 관측자료를 수집하고, 품질관리를 거쳐 제공하는 시스템 WINK가 최근 구축되었다. 이 시스템 구축을 위한 각 기관별 장기파랑 관측자료의 수집 및 선별, 역추산자료의 생성, 선별된 관측자료의 품질관리 방법, 웹 기반 자료제공 시스템 구축 과정의 기술적 내용을 본 논문에 기술하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.126-132
• /
• 2006

In this paper, we aim to control the sound and vibration spatially, so that a desired physical variable is enhanced within a zone we select. This is somewhat analogous to have manipulators that can draw wave shape in any place we want. Brightness and contrast control have shown that such a manipulation is possible by controlling multiple sources[J.-W. Choi and Y.-H. Kim, J. Acoust. Soc. Am. 111(4), 2002]. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to manipulate spatial distribution of sound by making two different kinds of zone ? the bright and dark zone- at the same time. The primary focus of this study is to unit the theoretical formulation of the brightness and contrast control and to find a link between these methods, as well as its relation to other conventional techniques. It is also shown that we can generate various shape of wave field by transforming the domain we consider.