• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.57-61
• /
• 2006

Waste foundry sand of industrial waste which is happening by vast quantity according to fast development of industry has much the occurrence amount and processing method is depended on reclamation, and is using by fine aggregate for construction by recycling method among others. In this research Waste foundry sand powder into cement replace fare use possibility availability judge wish to Slump and air content decreased the replacement ratio increases by concrete special quality that do not harden according to experiment result, and unit capacity mass and bleeding increased the replacement ratio increases. Hardening concrete intensity special quality displayed strength improvement to replacement ratio 20%, and tendency that watertightness increases most in replacement ratio loft in watertight property appear. Considering the strength and watertight properties, the adequate usage of waste foundry sand powder is the 10% of replacement ratio.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.403-408
• /
• 2007

The concrete pipe(Hume, PC) and polyethylene(PE) pipe are usually used for dram pipe in local market. Hume pipe, however, is heavy and needs the high cost of construction and PC pipe has a disadvantage to easily occur the deformation by the outside pressure even though it is light and constructible. The corrugated steel pipe coated with polyethylene is used increasedly because it is durable, constructible and economical. However, it is not used for sewage or waste water because it is hard to guarantee the watertight property on the coupling part. In this study, we studied on the flange coupling and the method of its construction to guarantee the watertight property and easy to use. If the developed flange coupling and method are used on a construction field, the economical property, constructible property and structural safety can be guaranteed.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.93-98
• /
• 2006

Admixture materials are used in mixing concrete or mortar to improve quality and performance of the concrete. This study examines the potential use of talc as a substitute for cement, the benefits of recycling waste resources for economical efficiency and quality improvement of concrete. The test was carried out by replacing the plain mix with fine grains of talc at the rate of 10%, 20%, and 30%. Talc was divided into three groups depending on the degree of pulverizing. For wet concrete, porosity, slump, bleeding per unit, and setting time by penetration resistance were measured; similarly, for dry concrete, strength and watertight Property were tested. Test results showed that the amount of bleeding and setting time could be shortened, but the strength and watertight proofing severely deteriorated. However, at the replacement rate of 10%, talc showed equal performance with the plain at all degrees of pulverization, which suggests its potential use as admixture material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.393-398
• /
• 2000

To use concrete box culverts effectively, precast goods are manufactured at a factory, then linked and anchored with prestressing tendon at a field. However, the corrosion of rebar and prestressing tendon in the box culverts utilizing portland cement concrete is issued when the cracks occur at a underground water level. It has been reported that reported that expansive concrete, compared with portland cement concrete, has many structural advantages such as increasing capacity of watertight, controling initial crack and improving durability due to its property of expansion. During flexure test with RC beam made from expansive concrete, in the case of a constant section of concrete element, the lower steel ratio is, and in the case of a constant steel ratio, the more incremental the section of concrete element, the more incremental the amount of chemical prestress by expansive concrete is. At the segment of the box culverts using expansive concrete, the numbers of crack and its gap is reduced, and ultimate load and initial crack load is much larger than the segment at which expansive concrete is nor used. Also lay-out of tendon with a curvature generate upward force so that deflection is reduced. Through the whole procedure, it could be confirmed that performance precast box culvert by means of using expansive concrete is improved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.33-38
• /
• 2004

This study was performed to know watertightness and reduction effect and crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based inorganic compound made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.5-2.0\%$ of adding ratio of fluosilicate salt based inorganic compound. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. Effect of crack reduction was evaluated by length, drying shrinkage as well as stress change of hardened concrete at unrestraint/restraint state and also elucidated crack pattern on the concrete surface. It is ascertained that characteristics of crack resistance and watertightness for concrete was improved by an adequate addition of fluosilicate salt based inorganic compound.

• 콘크리트학회논문집
• /
• 제13권6호
• /
• pp.527-535
• /
• 2001

SF, ZS 및 SS의 혼합비율을 변화시켜 제조한 구체방수재를 대상으로, 방수재의 종류 및 첨가량에 따른 굳지 않은 콘크리트 및 경화콘크리트의 수밀특성을 분석한 결과는 다음과 같다. 구체방수재의 첨가량이 증가할수록 유동성은 증가하였으며, 응결시간은 지연되었다. 경화상태 압축강도는 기존 제품인 A의 경우, 방수재 첨가량 183kg/㎥까지는 증가하나, 그 이후 24kg/㎥에서는 감소하는 것으로 나타났으며, 시제작품인 B, C, D의 경우는 기존 구체방수재인 A에 비해 높은 강도특성이 있는 것으로 나타났다. 또한, 흡수량은 구체방수재 혼입량이 증가하고, 재령이 경과할수록 적어지는 것으로 나타났는데 특히, ZS의 첨가량이 많은 방수재 일수록 크게 낮아지는 것으로 나타났다. 투수량은 흡수량과 유사한 경향으로, 방수재 첨가량이 증가하고, 재령이 경과할수록 감소하는 등의 특성을 나타내고 있었다. 이상을 종합하여 볼 때 시제작품으로 가정한 SF : ZS : SS의 혼합비가 1 : 2 : 1이고, 혼입량이 63kg/㎥인 조건이면 기존 구체방수재보다 우수한 품질의 수밀콘크리트를 제조할 수 있는 것으로 판단되었다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.243-254
• /
• 2019

본 연구에서는 지금까지 공동주택 지하주차장 상부 슬래브에 적용하여 누수하자가 발생된 방수공법들의 문제점과 상부 슬래브의 특성을 고려한 요구조건을 검토하고, 이에 적합한 성능(안)을 선정하여 복합형 폴리우레아 공법을 대상으로 그 적합성 여부를 판단하고자 하였다. 검토결과, 공동주택 지하주차장 상부슬래브에는 (1) 균열 및 거동 대응성, (2) 바탕면 일체성, (3) 수직부 수밀 안정성, (4) 누름층 시공 용이성, (5) 충격 및 누름 대응성, (6) 차량 이동하중에 대한 대응성 등의 성능검토가 필요하겠다. 연질, 경질의 복합형 폴리우레아를 대상으로 요구조건에 해당하는 5가지 항목에 대한 평가를 진행한 결과 모두 조건에 부합하는 것으로 확인되었으며, 단일 공법으로 적용함에 있어 문제점이 있던 재료들을 복합화 함으로서 각 재료의 장단점을 보완하여 효과적으로 적용할 수 있음을 확인하였다. 단, 실제 현장에 적용하기 위해서는 향후 Mock-up 평가 등 현장 적용성에 대한 추가적인 평가가 이루어져야 할 것이며, 복합화에 따른 경제성 및 유지관리성 측면에서의 검토를 통해 실제 시장 적용성 여부에 대한 후속적인 연구가 필요하겠다.