• Macromolecular Research
• /
• 제14권6호
• /
• pp.634-639
• /
• 2006

Waterborne polyurethane (WBPU) adhesive with varying amounts of dimethylol propionic acid (DMPA) was synthesized by prepolymer process and blended with polyisocyanate hardener. The mean particle size of the WBPU dispersion decreased with increasing DMPA content. $^1H$ NMR spectroscopy confirmed the formation of allophanate bonds and biuret bonds due to the reaction of hardener NCO with urethane/urea groups. The optimum NCO content with the greatest adhesive strength was dependent on the total content of urethane/urea groups in the WBPU molecules. The optimum NCO content increased with increasing number of urethane groups (DMPA content). The adhesion strength of WBPU adhesives was maximized at a molar ratio of hardener NCO to urethane/urea of about 0.28.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.5-8
• /
• 2001

Waterborne Polyurethane dispersions continue to show growth in commercial usage due to the ever increasing environmental legislation to reduce VOC in Coating and adhesive materials. The transition from solvent-based to waterborne Polyurethane(WPu) has also been facilitated by advances in both the chemistry and technology employed and the formulation expertise required. (omitted)

• 접착 및 계면
• /
• 제23권2호
• /
• pp.33-38
• /
• 2022

본 연구에서는bio polyol 함량에 따라 bio polyol based 친환경 수분산 폴리우레탄을 합성하고 그 특성을 알아보고자 하였다. Polyester polyol(DT-1040)과 castor oil based polyol(COP)의 비율에 따른 bio polyol based 수분산 폴리우레탄을 성공적으로 합성한 것을 확인할 수 있었다. 합성된 bio polyol based 수분산 폴리우레탄의 Tg는 -70 ℃와 -30 ℃ 부근에서 나타났으며, COP의 함량이 증가할수록 유리전이온도 구간이 넓어지는 것을 확인할 수 있었다. 또한, COP의 함량이 증가할수록 인장강도는 감소하였고, 접착력은 DT-1040:COP=7:3일 때 최고값을 나타내었다.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.81-85
• /
• 2017

In order to improve the water resistance, we synthesized waterborne polyurethane by using polyester polyol, poly(propylene carbonate) (PPC), 4,4'-dicyclohexylmethane diisocyanate ($H_{12}MDI$), and dimethylolpropionic acid (DMPA). The properties of the synthesized waterborne polyurethane using poly(propylene carbonate) (WPUP) were evaluated by FT-IR, $^1H-NMR$, GPC, DSC, TGA, and UTM. The mechanical properties increased while the adhesion properties decreased with the increase in the amount of PPC. The highest water resistance was shown when the ratio of polyester polyol to PPC was 9:1.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.373-382
• /
• 2006

A series of crosslinkable, waterborne polyurethanes (I-WBPUs) were prepared by in-situ polymerization using isophorone diisocyanate (IPDI)/poly(tetramethylene oxide) glycol (PTMG, $M_n$=2,000)/dimethylol propionic acid (DMPA)/ethylene diamine (EDA)/triethylamine (TEA)/aminoplast[hexakis(methoxymethyl)melamine (HMMM)] as a crosslinking agent. Typical crosslinkable, waterborne polyurethanes (B-WBPUs) blended from WBPU dispersion and aqueous HMMM solution was also prepared to compare with the I-WBPUs. The crosslinking reaction between WBPU and HMMM was verified using FTIR and XPS analysis. The effect of the HMMM contents on the dynamic mechanical thermal, thermal, mechanical, and adhesion properties of the I-WBPU and B-WBPU films were investigated. The storage modulus(E'), glass transition temperatures of the soft segment ($T_{gs}$) and the amorphous regions of higher order ($T_{gh}$), melting temperature ($T_m$), integral procedural decomposition temperature (IPDT), residual weight, $T_{10%}$ and $T_{50%}$ (the temperature where 10 and 50% weight loss occurred), tensile strength, initial modulus, hardness, and adhesive strength of both I-WBPU and B-WBPU systems increased with increasing HMMM content. However, these properties of the I-WBPU system were higher than those of the B-WBPU system at the same HMMM content. These results confirmed the in-situ polymerization used in this study to be a more effective method to improve the properties of the WBPU materials compared to the simple blending process.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.8-12
• /
• 2017

본 연구에서는 polyester polyol을 사용한 수성 폴리우레탄의 내수성을 향상시키기 위해 polyester polyol, poly(propylene carbonate) (PPC), 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA)를 사용하여 수성 폴리우레탄을 합성하였다. PPC를 사용하여 합성된 수성 폴리우레탄의 물성은 FT-IR, GPC, DSC 및 UTM 등을 통해 평가하였다. PPC의 함량이 증가함에 따라 합성된 수성 폴리우레탄의 기계적 물성은 증가하였으며 polyester polyol과 PPC의 비가 9 : 1일 때 가장 높은 값의 내수성을 나타내었다.

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.97-102
• /
• 2002

A series of waterbome poly(urethane-urea) anionomers were prepared from isophorone diisocyanate (IPDI), polycaprolactone diol (PCL), dimethylol propionic acid (DMPA), ethylene diamine (EDA), and triethylamine (TEA), NaOH, or Cu($(COOCH_3)_2$) as neutralizing agent. This study was performed to decide the effect of neutralizing agent type on the particle size viscosity, hydrogen bonding index, adhesive strength, antistaticity, antibacterial and mechanical properties. The particle size of the dispersions decreased in the following order: TEA based samples (T-sample), NaOH based samples (N-sample), and Cu($(COOCH_3)_2$) based sample (C-sample). The viscosity of the dispersions increased in the order of C-sample, N-sample, and T-sample. Metal salt based film samples Of and C-sample) had much higher antistaticity than TEA based sample. By infrared spectroscopy, it was found that the hydrogen bonding index (or fraction) of samples decreased in the order of T-sam-pie, N-sample, and C-sample. The adhesive strength and tensile modulus/strength decreased in the order of T-sample, N-sam-pie, and C-sample. The C-sample had strong antibacterial halo, however, T- and N-samples did not

• 접착 및 계면
• /
• 제8권4호
• /
• pp.1-7
• /
• 2007

친환경적인 수분산 폴리우레탄은 코팅, 접착제 등의 분야에서 급속하게 사용되어지고 있다. 하지만 수분산 폴리우레탄은 용제형 폴리우레탄에 비해 내화학성, 내열성, 기계적 물성 등이 떨어져 이를 개선하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylolpropionic acid (DMPA), ethylenediamine (EDA) 및 유기화된 나노클레이를 사용하여 폴리우레탄/클레이 나노복합체의 열적, 기계적 물성을 측정한 결과, 물성이 향상됨을 확인할 수 있었다. 또한, 나노클레이의 함량이 증가할수록 접착강도가 증가하였으며, 특히 3 wt% 함량일 때 최적의 접착력을 나타내었다.

• 접착 및 계면
• /
• 제16권1호
• /
• pp.22-28
• /
• 2015

본 연구에서는 수분산 폴리우레탄의 내가수분해성 및 접착력을 향상시키기 위하여 polyester polyol, epoxy resin, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA)를 사용하여 epoxy를 함유한 수분산 폴리우레탄을 합성하였다. 또한 합성된 수분산 폴리우레탄의 물성은 DSC, UTM, adhesion test 등을 통해 평가하였다. 합성된 수분산 폴리우레탄의 Tg는 $-50^{\circ}C$ 부근에서 나타났으며, epoxy resin의 함량이 증가함에 따라 Tg도 상승하는 결과를 나타내었다. Epoxy resin의 함량이 증가함에 따라 인장강도는 증가하였고, 신율은 감소하였다. 또한 접착력 및 내가수분해 접착력은 polyol : epoxy = 99 : 1에서 최고값을 나타내었다.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.8-13
• /
• 2007

본 연구에서는 teramethylxylene diisocyanate (TMXDI)와 poly(tetramethylene glycol) (PTMG), polycarprolactone (PCL), dimrthylol proponic acid (DMPA)를 사용하여 무용제형 수분산 폴리우레탄을 합성하였으며, 음이온성기의 함량이 열적, 기계적 물성 및 접착력에 미치는 영향을 검토하였다. 합성된 무용제형 수분산 폴리우레탄의 Tg는 $-70{\sim}-50^{\circ}C$ 범위이고 PCL의 함량이 증가함에 따라 Tg는 상승하였다. 인장강도와 접착력, 열 안정성은 PCL과 음이온성기의 함량이 증가함에 따라 증가하였고 신율은 감소하였다.