• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.558-566
• /
• 2007

The performance characteristics of water-chilling heat pump using $CO_2$ with respect to variation of refrigerant charge amount was investigated experimentally. An experimental apparatus is consisted of a compressor, a gas cooler, an expansion valve, an evaporator and a liquid receiver. All heat exchangers used in the test rig are counter-flow-type heat exchangers with concentric dual tubes, which are made of copper. The gas cooler and the evaporator consist of 6 and 4 straight sections respectively arranged in parallel, each has 2400 mm length. The experimental results summarize as the followings : As the refrigerant charge ratio of $CO_2$ heat pump system increases, the discharge pressure and compressor ratio increases, but mass flow rate of refrigerant decreases. Also the compressor work increases with the increase of refrigerant charge ratio. However, the heating and cooling capacity of $CO_2$ heat pump decreases as the refrigerant charge ratio increases. The maximum heating COP of $CO_2$ heat pump system presented at 0.25 refrigerant charge ratio. It is possible to confirm the optimum charge ratio of $CO_2$ heat pump system by the viewpoint of heating COP.

• 멤브레인
• /
• 제3권3호
• /
• pp.108-116
• /
• 1993

수면전개 혼합적층막의 기체투과계수는 PS의 혼합비율이 증가함에 따라, 분리계수는 PVC의 환합비율이 증가함에 따라 증가하였다. 기체투과기구는 PS의 혼합비율이 감소함에 따라 Poiseuile-Knudsen 모델에서 solution-diffusion모델로 전이하였다. 한편 혼합박막의 구조는 공기면측에 소수성의 PS가, 수면측에는 친수성인 PVC가 배향된 직렬혼합구조였으며, 기체투과거동은 series model을 따랐다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.83-87
• /
• 2005

The kinetics of the direct synthesis of DME was studied under different conditions over a temperature range of $220\~280^{\circ}C$, syngas ratio $1.2\~ 3.0$ All experiment were carried out over hybrid catalyst, composed to a methanol synthesis catalyst (Cu/ZnO/$Al_2O_3$) and a dehydration Catalyst ($\gamma$-Al_2O_3$) The observed reaction rate qualitatively follows a Langmiur-Hinshellwood type of reaction mechanism. Such a mechanism is considered with three reaction, methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol and water, individual reaction rate was determined

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.62-69
• /
• 2000

Present study deals with performance analysis of an inert gas generator (IGG) which can be used as effective means to suppress fire. The IGG uses a turbo-jet engine to generate inert gas for fire extinguishing. It is generally known that a less degree of oxygen content in the product of combustion will increase the effectiveness of fire extinguishing. An inert gas generator system with water injection has advantages of suffocating and cooling effects that are very important factors for fire extinguishing. Some aspects of influencing parameters, such as, air excess coefficient, compressor pressure ratio, air temperature before combustion chamber, gas temperature after combustion chamber, mass flow rate of water injection etc. on the performance of IGG system are investigated.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.142-154
• /
• 1998

The effects of recirculated exhaust gas on the characteristic of soot emissions have been investigated by using an eight-cylinder, four-stroke, direct injection and water-cooled diesel engine operating at several loads and speeds. The experiments in this study are carried out at the fixed fuel injection timing of $38^{\circ}$ BTDC regardless of experimental conditions. The intake oxygen concentration and the mean equivalence ratio calculated by the intake air flow and fuel consumption rate are used to analyze and discuss the influences of EGR rate on soot emissions. Results of this study indicate that soot emissions increase owing to the drop of intake oxygen concentration and the rise of equivalence ratio as the EGR rate increases at a given engine load and speed, especially the high load.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.42-52
• /
• 2011

In this laboratory study, the changes in gas-exposed perchloroethene (PCE) saturation in sand during a PCE removal process were measured using gaseous tracers. The flux of fresh air through a glass column packed with PCEcontaminated, partially water-saturated sand drove the removal of PCE from the column. During the removal of PCE, methane, n-pentane, difluoromethane and chloroform were used as the non-reactive, PCE-partitioning, water-partitioning, and PCE and water-partitioning tracers, respectively. N-pentane was used to detect the PCE fraction exposed to the mobile gas. At water saturation of 0.11, only 65% of the PCE was found to be exposed to the mobile gas prior to the removal of PCE, as calculated from the n-pentane retardation factor. More PCE than that detected by n-pentane was depleted from the column due to volatilization through the aqueous phase. However, the ratio of gas-exposed to total PCE decreased on the removal of PCE, implying gas-exposed PCE was preferentially removed by vaporization. These results suggest that the water-insoluble, PCE-partitioning tracer (n-pentane in this study), along with other tracers, can be used to investigate the changes in fluid (including nonaqueous phase liquid) saturation and the removal mechanism during the remediation process.

• 환경위생공학
• /
• 제16권2호
• /
• pp.17-23
• /
• 2001

The objective of this study was to investigate the component ratio of gas generated at closed GD landfill site in MY city and the decomposition status of landfill gas, and was to examine and analyze the properties of the landfill gas. In addition, to provide basic data required to stabilize landfill earlier in the future, the study was to measure gas by landfill gas gauge and to analyze the properties of landfill gas based on documents. As a result of analyzing the properties, acquired follow results. 1. The main elements of landfill gas, $CH_4$ and $CO_2$ were respectively 25.02% and 22.325 on the average. 2. $NH_3$ and $H_2S$ were respectively 1.07 4.97 and 0.75 1.15 on the average. 3. Generated gas was different depending on water, pH properties of MSW(Munticipal Solid Wastes) and their decomposition rate. Furthermore, when measured the temperature of room to inspect landfill gas, the temperature was $22{\;}-{\;}30^{\circ}C$ in the average.

• 해양환경안전학회지
• /
• 제19권5호
• /
• pp.518-524
• /
• 2013

본 연구에서는 균질기에 의해 혼합된 물과 벙커-A를 보일러로 연소하였을 때의 배기 배출물 특성에 대해 연구를 수행하였다. 그 결과로 균질기로 균질화 된 벙커-A의 경우, 순수 벙커-A에 비해 NOx 농도는 19 %, CO 농도는 54 % 감소를 나타냈다. 물-벙커A의 경우 물 혼합 비율이 증가할수록 NOx 농도분포가 낮아지는 것을 확인할 수 있었다. 특히, 20 %물-80 %벙커-A의 경우 순수한 벙커-A 보다 배기가스 내 NOx 농도가 45 %까지 감소하였다. 그러나 20 %물-80 %벙커-A의 경우, CO농도 분포는 불규칙한 변화를 나타냈다. 이것은 일정량 이상의 물 혼합은 보일러의 연소 성능 저하 원인이 될 수 있다는 것을 의미한다. 이 결과로부터 본 연구에서 보일러의 정상 연소를 위한벙커A유 내 물의 한계 혼합율은 15 % 인 것을 알 수 있었다. 연돌 부근에서 채취한 매연 부착양은 물의 혼합율이 증가할수록 감소하였다.

• 한국태양에너지학회 논문집
• /
• 제26권2호
• /
• pp.19-25
• /
• 2006

Methane hydrate, non-polluting new energy resource, satisfies requirement and considered as a precious resource that can prevent the global warming. Fortunately, there are abundant resources of methane hydrate distribute in the earth widely. Therefore, developing the techniques that can utilize these gases effectively is highly desired. The work in this paper here is to develop a skill which can transport and store methane hydrate. As a first step, the equilibrium experiment was carried out by increasing temperatures in the cell at fixed pressures. The influence of gas consumption rates under variable degree of subcooling, stirring and water injection has been investigated formation to clarify kinetic characteristics of the hydrate. The results of present investigation showed that the enhancements of the hydrate formation in terms of the gas/water ratio are closely related to operational pressure, temperature, degrees of subcooling, and water injection.

• 한국환경과학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2014

The sludge flotation/thickening apparatus equipped a micro-bubble generating pump was used to investigate micro-bubble generating properties on operational parameters. We evaluated micro-bubble generating properties as results to be operated the apparatus by operational parameters which are pump discharge pressure, air/water ratio(A/W ratio), air flow rate, and water flow rate. Micro-bubble generating efficiencies in pumps without recycling flow and with 50% of recycling flow was found to be very efficient on optimum A/W ratio from 1.06 to 3.62% and optimum A/W ratio from 1.05 to 4.06%, respectively. In condition of 3.6% of A/W ratio, we showed that the apparatus could be generated 36,000 ppm of micro-bubble concentration to be optimum treatment efficiency in sludge thickening process.