• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.149-153
• /
• 2008

개발에 따른 수질오염을 최소화하기 위해서는 사업 전 후에 발생하는 오염량을 정량적으로 산정하여 관리할 필요가 있다. 점 오염원(point source)은 발생대상과 규모가 확정적이므로 법률적으로 강화된 기준에 의하여 충분한 대책을 수립할 수 있다. 이에 반해 비점오염원(non-point source)은 점오염원을 제외한 모든 오염원으로 발생기구나 전파경로에 대한 관리가 점오염원의 경우보다는 어렵다. 기존의 비점오염원 관리를 위한 강우량의 규모결정은 단순히 손실우량을 가정하여 이보다 큰 강우량을 이용하였으나 이는 연간 발생횟수나 지속시간에 대한 항은 거의 고려하지 못하는 실정이다. 이를 해결하기 위해서는 적정 설계강우량의 크기를 연간 발생횟수나 지속시간을 고려하여 결정하고 초기손실량, 유출률, 연간강우량, 연간강우횟수에 대한 적절한 민감도 분석(sensitivity analysis)이 동시에 수행 되어야한다. 본 연구에서는 평상시 강우의 발생특성에 대한 해석 기법연구와 해석적 확률기법(analytical probabilistic method)을 도입하고 공학적으로 합리적인 정량적 산정방법 및 최적환경용량 산정기법에 대하여 제시하여 실제 개발사업에서 합리적인 비점오염원 처리시설의 용량 및 효율을 결정할 수 있도록 하여 최적의 유역관리가 가능하도록 제안하였으며, 이를 위한 실증적 적용결과 분석을 위하여 유역자체개발에 의한 택지개발사례를 검토하였다. 앞으로도 개발은 계속 이루어질 수밖에 없으며, 개발에 따른 영향을 최소화하여 지속가능한 개발을 이루어야 한다. 특히 수자원의 이용에서 유역자체 개발과 더불어 수자원자체 개발에서도 점오염원의 관리만으로는 수질관리가 불가능한 것으로 판단되었다. 비점 오염원의 관리 시스템은 지속적으로 개발되고 있으나 정량적인 환경용량 산정 없이 편의적 접근이 시도되는 현실에 비추어 보다 공학적이고 정확한 판단이 필요한 시점이다. 이러한 일련의 기작으로 개발에 의하여 추가 발생되는 비점오염원의 양을 정량적으로 산정하여 자연상태보다 적극적인 대책을 수립하면 개발에 따른 오염원의 최소화뿐만 아니라 자연상태보다 효율적인 유지관리가 가능하다.

• 한국환경과학회지
• /
• 제23권9호
• /
• pp.1627-1634
• /
• 2014

Odor control technology include absorption, adsorption, incineration and biological treatments. But, most of processes have some problems such as secondary organic acids discharge at the final odor treatment facility. In order to solve the problems for effective treatment of organic acids in odor, it is necessary to develop a new type advanced odor control technology. Some of the technology are plasma only process and plasma hybrid process as key process of the advanced technology. In this study, odor removal performance was compared DBD(Dielectric Barrier Discharge)plasma process with PCHP(plasma catalysis hybrid process) by gaseous ammonia, formaldehyde and acetic acid. Plasma only process by acetic acid obtained higher treatment efficiency above 90%, and PCHP reached its efficiency up to 96%. Acetic acid is relatively easy pollutant to control its concentration other than sulfur and nitrogen odor compounds, because it has tendency to react with water quickly. To test of the performance of DBD plasma process by applied voltage, the tests were conducted to find the dependence of experimental conditions of the applied voltage at 13 kV and 15 kV separately. With an applied voltage at 15 kV, the treatment efficiency was achieved to more higher than 13 kV from 83% to 99% on ammonia, formaldehyde and acetic acid. It seems to the odor treatment efficiency depends on the applied voltage, temperature, humidity and chemical bonding of odors.

• 한국환경성돌연변이발암원학회지
• /
• 제18권1호
• /
• pp.22-25
• /
• 1998

Anticarcinogenic activity of astaxanthin-containing egg yolks (designate AEY) was investigated for 7,12-dimethylbenz[a]anthracene (DMBA)-induced two stage mouse epidermal carcinogenesis. Female ICR mouse (6-7 weeks of age) were house in a humidity-and-temperature-controlled facility and subjected to feed and water ad libitum. AEY (10 mg/0.2 ml acetone) was painted on the back of mice 7 days, 3 days and 5 min before DMBA treatment (50 nmole/0.2 ml acetone). One week later after DMBA treatment, 6 ${\mu}g$ tetradecanoyl 12-phorbol 13-O-acetate (TPA) dissolved in 0.2 ml acetone was applied on the mouse twice weekly over a period of 22 weeks. No sample was given to control mice. Control egg yolk (CEY) and astaxanthin-containing oil (designate AO) from Phaffia rhodozyma were used as positive controls. Mouse treated with AEY exhibited 10 tumors per mouse whereas control mouse exhibited 15 tumors per mouse, the fact that 33% reduction of tumor per mouse by AEY treatment. Tumor incidence was also reduced to 15% by AEY treatment when compared to that of control group. Such effects were also seen in CEY and AO treatment groups, but leaser extent. AO gave reduction of food intake and body weights relative to those of AEY and CEY, indicating toxicity of AO. These results suggest that AEY exhibits anticarcinogenic activity for DMBA-induced mouse epidermal carcinogenesis.

• Preventive Nutrition and Food Science
• /
• 제4권2호
• /
• pp.130-133
• /
• 1999

Body fat-reducing ability of oyster mushroom (Pleurotus ostreatus) water extract (OMWE) was investigated of mice by supplying it drinking water. OMWE(2.95% solid content ) was prepared by extracting a low grade of the mushroom at 12$0^{\circ}C$ for 10min. The solid material of OMWE was composed of 65.2% reducing sugar, 0.23% crude fat, 0.5%total protein, 1.2% ash and 32.9% others. OMWE was appropriately diluted with drinking water. Seventy two male ICR mice(25$\pm$1 g, 7~8 weeks of age, 6 mice/cage, 18 mice/treatment) housed in polycarbonate cages containing $\beta$-chips were adopted in a temperature-and humidity-controlled facility with free access to water and diet. One week later, the mice were subjected to one of the treatments for 36days : 0 (control), 10, 50 and 100% OMWE. Drinking wter with or without OMWE was supplied twice (40ml each, 80ml in total ) daily per cage. Body weight and fed intake were recorded every three days. At the end of the experiment, mice were sacrificed to determine the chemical composition (fat, protein, ash and water). Body weight of mice treated with OMWE (10, 50 and 100%) at day 36 was 35.9, 35.9and 35.5g per mouse , respectively, and not significantly reduced as compared to that (36.5g/mouse) of control mice. Average body fat of 0,10,50 and 10% OMWE -treated mice was 14.3, 13.1, 10.7 and 12.0% , respectively. Body fat reduction by 50% OMWE treatment was 25.2% (p<0.05) relative to control. OMWE did not affect feed intake. The contents of body protein and ash were increased with respect to body fat decrease, while water content was not changed much. These results suggest that OMWE could reduce body fat of the mice without body weight change, giving the best effect by 50% OMWE.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.755-764
• /
• 2016

Pressure retarded osmosis (PRO) processes can be implemented on a number of water types, using different technologies and achieving various power outcomes. In this study, Sewage facility effluent was used for feed solution of PRO and synthetic NaCl water for draw solution. This study was conducted to investigate effect of water quality of pretreatment on power density and flux decline in PRO process. The results show that organic and particulate foulants have to be removed for more stable operation. Flourescence technique with EEM enables to investigate the chemical properties of aquatic organic matter by extracting spectral information. Humic/fulvic matters and soluble microbial by-products were analyzed as the most affecting factors on the PRO performance. As a result of analyzing the whole system based on the energy consumption of the unit process, specific energy consumption(SEC) of the applicable technology for PRO pre-treatment should be about $0.2kWh/m^3$ or less.

• 유기물자원화
• /
• 제20권4호
• /
• pp.97-105
• /
• 2012

본 연구는 음식물류 폐기물의 처리과정에서 발생하는 음식물류 폐수를 생활폐기물 소각시설에서 생활폐기물과 음식물류폐수를 혼합하여 소각처리 방법과 소각시 음식물류 폐수를 이용한 질소산화물 제거 및 배출가스의 영향등을 조사하였다. 해양투기용으로 발생된 음식물류폐기물 폐수는 성상이 94-96%의 함수율을 갖고 있다. 음식물류폐기물 폐수를 주입하였을 때 소각로 출구 온도는 $897^{\circ}C$이였으며, 평상시는 $925^{\circ}C$로 약 $28^{\circ}C$도 떨어졌다. 음식물류폐기물 폐수를 각각 $200{\ell}/hr$, $300{\ell}/hr$ 투입시 질소산화물의 평균배출농도는 각각 50ppm, 46ppm 이었다. 연관식 폐열보일러는 음식물류 폐수의 투입량이 많을수록 튜브 막힘 현상이 있었으며, 막힘 튜브는 압축공기를 이용한 튜브 청소로 원상태를 유지 할 수 있어 연속적 소각에는 방해가 되지 않았다. 유기성 폐기물인 음식물류 폐수의 자원화 처리방법과 더불어 기존 소각시설을 이용한 소각처리가 육상처리의 한 방법으로 자리매김 할 수 있으며, 소각시 배출가스의 질소산화물이 제거됨으로써 질소산화물 제거용 암모니아, 요소수 등 화학약품비용 절감하는 효과도 있는 것으로 나타났다.

• 방사성폐기물학회지
• /
• 제7권3호
• /
• pp.175-182
• /
• 2009

유동층 비중차 분리기를 이용하여 혼합 폐 이온교환수지에서 폐 양이온수지와 폐 음이온수지로 분리하였으며, 원소분석과 열분석으로 분리가 잘 되었음을 확인하였다. 비중차 분리를 통해 얻은 수백 미크론의 구형 알갱이 형태의 폐 양이온수지와 폐 음이온수지 각각을 볼밀로써 24시간 습식 분쇄하여 적정 입도 이하의 입자가 균일하게 분산된 고농도 슬러리를 얻은 다음, 희석하여 $COD_{cr}$, 농도 25,000ppm의 시료를 준비하였다. 실험실 규모의 소형 초임계수산화(Super Critical Water Oxidation, SCWO) 장치(반응기 용량 : 220 mL)로써 화력발전소에서 발생한 폐 양이온수지와 폐 음이온수지에 대해 최적의 분해조건을 확립한 다음, 파일럿플랜트(반응기 용량 : 24 L)로 scale-up 실험을 수행하였다. 우선 화력발전소의 폐수지로서 파일럿테스트를 실시한 다음, 원자력발전소의 폐수지로써 파일럿테스트를 수행하여 최적의 분해조건을 설정하였다. 실험실 규모의 소형 SCWO 장치와 파일럿플랜트의 설계 및 운전에서 얻은 경험을 바탕으로 원자력발전소 내에 설치 가능한 규모로 상용설비(처리용량 : 150kg/h)를 설계 중에 있다.

• 대한환경공학회지
• /
• 제27권2호
• /
• pp.158-162
• /
• 2005

이 연구에서는 대규모 나노여과 정수처리 시스템의 각 단계의 생물학적 안정성과 공정내의 AOC를 측정하고자 한다. 나노 여과 정수처리 시스템은 미 플로리다 주 남부의 Plantation 시의 $45,400\;m^3$/day (12 mgd) 규모의 연수화 시설에서 연구하였으며, 표면 대수층의 유기물이 많은 지하수를 원수로 이용하였다. 유입원수의 평균 AOC 농도는 158 g/L acetate-C이다. 전처리(산과 스케일 방지제첨가) 후 AOC농도는 12.7% 가량 증가하였는데, 이는 전처리 과정에서 투입된 화학물들이 생물학적 안정성을 저감시킬 수 있음을 의미한다. 전체적으로 나노여과공정은 63.4%와 94.8% 의 AOC 및 DOC 제거효율을 보였다. 특히 1단계에서의 AOC 제거율 (68%)이 2단계에서의 제거율 (58%)보다 다소 높았는데 이는 높은 회수율과 산 전처리과정이 있는 대규모 나노 공정 2단계에서 흔히 형성되는 낮은 pH 높은 이온강도 및 경도 등의 화학적 환경에 기인한다고 사료된다.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.403-409
• /
• 2007

This study was carried out to recommend the systematic improving practice for the effective operation of septic tank, and the evaluation of its BOD and nutrient removal efficiency depending on process, the survey of characteristics of FRP material, and the suggestion of optimum septic tank model within sewage treatment area. The average BOD concentration and BOD removal efficiency of septic tank which was carried out the cleaning periodically in 63.9 mg/L and 77.8%, shows good quality better than the septic tank which was not carried out the cleaning regularly. Maximum load of tensile, flexural and compressive strength increased in proportion to its thickness, and the contents standard 25% of glass fiber required upgrade over than 30%. Configuration and performance for the optimum of the septic tank suggests that over $0.75m^3$ of the effective total volume, adding to over $0.25m^3$ a man for more than 5 men of the treated person, retention time should be within one day. Improving plans about facility and materials quality of the septic tank have an obligation that protective wall ought to install on the concrete bottom and side faces to prevent crumble or transform from loading of the ground or upper part of the structure on the tank setting. And it is eliminated the uneffective resisting pressure and it keeps off circulate imperfect products by strengthening of the test methods such as stretching strength, pressing strength, glass fiber contents and thickness.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.80-83
• /
• 2008

As SOC (Social Overhead Capital) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, we may need to introduce a compulsory ventilation system as well as natural ventilation mechanism. The natural ventilation mechanism is enough for short tunnels, meanwhile longer tunnels require a specific compulsory ventilation facility. Many foreign countries already have been devoting on development of effective tunnel ventilation system and especially, some European nations and Japan have already applied their developed tunnel ventilation system for longer road tunnels. More recently, as the quality of life improved, our concerns about safety of driving and better driving environment have been increased. In order to obtain clearer and longer driving view, we are more interested in EP tunnel ventilation system in order to remove floating contaminants and automobile exhaust gas. Evan though it's been a long time since many European countries and Japan applied more economical and environment-friendly tunnel ventilation system with their self-developed Electrostatic Precipitator, we are still dependant on imported system from foreign nations. Therefore, we need to develop our unique technical know-how for optimum design tools through validity investigation and continuous possibility examination, eventually in order to localize the tunnel ventilation system technology. In this project, we will manufacture test-run products to examine the performance of system in order to develop main parts of tunnel ventilation system such as electrostatic precipitator, high voltage power generator, water treatment system, etc.