• Ocean Science Journal
• /
• 제41권4호
• /
• pp.227-234
• /
• 2006

Year-to-year variation of bottom cold waters around the Korea Strait was investigated based on bottom temperatures measured by submarine telephone cable between Pusan, Korea and Hamada, Japan from 1982 to 1992. The characteristics of bottom temperatures could be divided into three different groups: the Korean side, the middle, and the Japanese side. Temperature drops in summer appeared in all the three regions implying the intrusion of cold waters into the Korea Strait. Significant decreases in the Korean side were observed in 1983, 1986, 1990, 1991, and 1992 when bottom temperatures were high in the middle. In contrast, bottom temperatures significantly decreased in the middle in 1985, 1988, and 1989 when the temperature drops in the Korean side were relatively small. This tendency for a negative relationship was also shown in the second mode of an EOF analysis. In the years when bottom temperatures significantly decrease din the Korean side, the cold water along the east coast of Korea expanded offshore and its temperature was low. On the contrary, cold water in the southern region of the Ulleung Basin developed in the years when bottom temperatures decreased considerably in the middle.

• 한국패류학회지
• /
• 제25권2호
• /
• pp.93-96
• /
• 2009

Unexpected mass mortality has been one of the drawbacks in front of the stable production of Japanese scallop (Patinopecten yessoensis) on the Gangwon coasts of the East Sea. The preliminary data from our routine observation revealed that the mortality appeared to be related to variation of water temperature in the farming site and the degree of the mortality was dependent on scallop strain. The present study performed to verify the preliminary findings exhibited that the mortality was closely related to daily temperature variation rather than monthly variation. Daily temperature variation was particularly damageable to the scallop during the temperature elevation period. Scallops from hatchery seeds (Chinese strain) were more tolerant against the temperature variation over those from wild seeds. The hatchery scallop gain of the temperature tolerance was probably due to their larval experience to higher temperature in the hatchery as well as their maternal genetic acclimation to upper temperature extreme of the Chinese environment which was recently found.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.919-925
• /
• 2006

The regression models for the water temperatures of Ban Byeon Stream and Yong Jeon stream were developed using multi-regression method. It was also investigated that the applicability of the stream temperature prediction to two-dimensional numerical simulation to predict the vertical water temperature in Imha Reservoir. Air temperature and dew point as independent variables were selected to be applicable to cases with the different variation of flow rates. The data division of water temperature using a cutoff flow rate of $20m^3/s$ was found to reduce the prediction error of the stream temperature. The mean absolute percent error of the numerical simulation results of the vertical water temperature in Imha Reservoir using the regression models was 11%, which was only 4.3% lager than the simulation result using the measured stream temperature. Therefore, the regression models of the stream temperatures using multi-regression method applied in this study could be applied to predict the vertical water temperature in Imha Reservoir with a good accuracy.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.51-60
• /
• 2003

An experimental research program is being undertaken to develop a regeneratively-cooled experimental thrust chamber of liquid rocket engine using liquefied natural gas and liquid oxygen as propellants. Prior to firing test using a regenerative cooling with liquefied natural gas in this program, several firing tests were conducted with water as a coolant. Experimental thrust chambers with a thrust of about 10tf were developed and their firing test facility was built up. Injector used in the thrust chamber was of shear-coaxial type appropriate for propellants of gas and liquid phase and cooling channels are of milled rectangular configuration. Periodical variation of the soot deposition and discoloration was observed through an eyes' inspection on the inner wall of a combustion chamber and a nozzle after each firing test, and an intuitive concept of the periodical variation of mixture ratio near the inner wall of a combustion chamber and a nozzle at once was brought about and analyzed quantitatively. Thermal heat flux to the coolant was calculated and modified with the periodical variation model of mixture ratio, and the increment of coolant temperature at cooling channels was compared with measured one.

• 해양환경안전학회지
• /
• 제26권2호
• /
• pp.186-194
• /
• 2020

본 연구에서는 한국의 동해, 서해 및 남해안에서 하계 수온의 단기적인 변화에 영향을 주는 환경 요인을 파악하기 위해 국립해양조사원에서 제공하는 2016년 하계 조위관측소의 수온, 기온, 조위 및 바람자료를 이용하여 스펙트럼 분석을 실시하였다. Power spectrum 분석 결과, 평균조차가 100 cm 이상인 서해안(인천, 평택, 군산 및 목포)과 남해안(완도, 고흥, 여수, 통영 및 마산)에서는 수온, 조위가 동일한 주기에서 peak가 나타났다. 반면에 서해안과 남해안에 비해 평균조차가 상대적으로 작은 동해안(묵호, 포항 및 울산)과 부산에서는 수온의 주기성이 나타나지 않았다. Coherence 분석에서 서해안과 남해안의 3개 정점(완도, 고흥, 통영)은 수온과 조위의 상관성이 높게 나타났다. 특히 완도와 통영에서 수온과 조위의 상관성은 반일주기에서 0.96으로 높았다. 여수는 조석과 담수의 유입이 수온에 영향을 주는 것으로 보인다. 한편 마산의 수온은 남풍의 바람 영향이 가장 크지만 조석과 담수의 영향도 받는 것으로 판단된다. 그리고 동해안은 조차가 작고 해류의 영향이 크기 때문에 수온에 대한 조석의 영향이 작은 것으로 사료된다. 환경 요인의 시계열그래프를 비교한 결과, 수온과 조위가 상관성이 높게 나타난 정점은 창조 시 비교적 저수온의 외해수가 유입되고 낙조 시 빠져나가는 것으로 판단된다. 일주기의 수온 변화는 조석의 영향이 크지만 전체적인 수온의 상승과 하강은 기온의 영향이 큰 것으로 보인다.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.870-878
• /
• 2003

The scale is removed from the strip by high pressure hydraulic descaling at the FSB (Finishing Scale Breaker). Recently, the spray height of nozzle has a trend to be shorter for the purpose of increasing the impact pressure by the high pressure water jet. Here, the nozzle intervals should be decided after considering the impact pressure and the temperature distribution on the strip. In other words, the minimum of impact pressure at the overlap of spray influences the surface grade of the strip due to scale and the overlap distance of the spray affects the temperature variation in the direction of the width of strip. In the present study, the impact pressure of the high pressure water jet is measured by the hydraulic descaling system and calculated with regard to the lead angle of 15$^{\circ}$ and the offset angle of 15$^{\circ}$, and then the temperature distribution and the temperature variation are calculated at the overlap distances of 0 mm, 10 mm, 20 mm, and 30 mm, respectively. The method of setting nozzle intervals is shown by utilizing these results.

• 센서학회지
• /
• 제15권1호
• /
• pp.7-12
• /
• 2006

The multi-functional one-chip sensor has been fabricated to reduce output variation under various water environment. There were a temperature sensor, a piezoresistive type pressure sensor, and a electrode type conductivity sensor in the fabricated one-chip sensor. This sensor was measured water depth in the range of $0{\sim}180cm$, temperature in the range of $0{\sim}50^{\circ}C$, and salinity in the range of 0 $0wt%{\sim}5wt%$, respectively. Since the change of water depth in solution environment depends on various factors such as salinity, latitude, temperature, and atmospheric pressure, the water depth sensor is needed to be compensated. We tried to compensate the salinity and temperature dependence for the pressure in water by using lookup-table method.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.11-17
• /
• 2012

In this study, a simulation program was developed with heat transfer model in the thermal storage tank for a solar collector and burner combined heating and hot water supply system. Analysis was conducted with variation of operating condition and schedule to analyze performance of a hot water supply and panel heating system with a solar collector and burner combined thermal storage tank. The simulation program is divided two sections. One part is calculation of temperature variation of water which flows through the panel in the floor for heating of the residential house during 24 hours, and the other part is heat transfer calculation for the reaction time to get desired water temperature in the thermal storage tank. As results, light oil consumption and system performance during operation period were analyzed with variation of climate condition and with or without solar collector. Most of the case, oil could be saved about from 24 to 41% with installing the solar collector. The performance of the system is more dependent on radiation time of the solar collector rather than the intensity of the solar radiation which was adopted for the climate analysis.

• 태양에너지
• /
• 제20권1호
• /
• pp.55-62
• /
• 2000

An experimental study on the stratified fluids with water and silicon oil of same volume in the cavity with upper cooling surface was carried out to investigate the flow characteristics, heat transfer through the interface of fluids, and the applications of thermal behaviors in a square cavity. The experiments were performed with variation of initial temperature and cooling surface temperature. The temperature drop of oil was faster than that of water and freezing was initiated from the interface of oil and water and propagated downward. For the water above $4^{\circ}C$, the cooling rate was faster than that below $4^{\circ}C$ and showed almost same temperature distribution but for the water that of below $4^{\circ}C$, it showed the stable stratified temperature distribution. The lower the initial temperature and the higher the cooling surface temperature was, the longer the supercooling duration.

• 한국패류학회지
• /
• 제21권1호
• /
• pp.41-46
• /
• 2005

A series of radiotracer studies were conducted to evaluate the influence of water temperature and/or body size on the clearance rates and uptake rates of Cd, Se and Zn in the Asiatic clam, Corbicula fluminea, Asian clam Potamocorbula amurensis and Balthic clam, Macoma balthica. Uptake rates of Cd, Se and Zn were estimated simultaneously with clearance rate of clams under 3 different water temperature conditions (5, 13 and $21^{\circ}C$). The weight specific clearance and metal uptake rates of P. amurensiswere increased with temperature, however, no consistent temperature effect was observed for the other clams. The variation of uptake rates of Cd, Se and Zn along with temperature or body size in each clam species was well associated with clearance rates. The inter-species as well as the intra-species difference of metal uptake rates could be well explained by the variation of clearance rates of clam individuals.