• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.52-56
• /
• 2009

In this study a dynamic modeling scheme is presented to derive the probabilistic structure of soil water and plant water stress when subject to stochastic precipitation conditions. The newly developed model has the form of the Fokker-Planck equation, and its applicability as a model for the probabilistic evolution of the soil water and plant water stress is investigated under climate change scenarios. This model is based on the cumulant expansion theory, and has the advantage of providing the probabilistic solution in the form of probability distribution function (PDF), from which one can obtain the ensemble average behavior of the dynamics. The simulation result of soil water confirms that the proposed soil water model can properly reproduce the results obtained from observations, and it also proves that the soil water behaves with consistent cycle based on the precipitation pattern. The plant water stress simulation, also, shows two different PDF patterns according to the precipitation. Moreover, with all the simulation results with climate change scenarios, it can be concluded that the future soil water and plant water stress dynamics will differently behave with different climate change scenarios.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.343-354
• /
• 2012

Primary water stress corrosion cracking (PWSCC) is a major safety concern in the nuclear power industry worldwide. PWSCC is known to initiate only in the condition in which sufficiently high tensile stress is applied to alloy 600 tube material or alloy 82/182 weld material in pressurized water reactor operating environments. However, it is still uncertain how much tensile stress is re-quired to generate PWSCC or what causes such high tensile stress. This study was performed to pre-dict the magnitude of weld residual stress and operating stress and compare it with previous experi-mental results for PWSCC initiation. For the study, a pressurizer safety nozzle was selected because it is reported to be vulnerable to PWSCC in overseas plants. The assessment was conducted by nu-merical analysis. Before performing stress analysis for plant conditions, a preliminary mock-up ana-lysis was done. The result of the preliminary analysis was validated by residual stress measurement in the mock-up. After verification of the analysis methodology, an analysis under plant conditions was conducted. The analysis results show that the stress level is not high enough to initiate PWSCC. If a plant is properly welded and operated, PWSCC is not likely to occur in the pressurizer safety nozzle.

• Korean Journal of Poultry Science
• /
• v.21 no.2
• /
• pp.93-99
• /
• 1994

Chickens subjected to heat stress decrease their heat production by consuming less feed. The lowered feed intake naturally brings about decreased production performance of chicken. The only exception to this is the increased survivability. Birds drink less when they eat less. In hot enviror-mental temperature, chicken need more water for increased heat loss through evaporation an increased urine excretion. Thus, the increased water intake may alleviate the heat stress of chicken. Various electrolytes supplementation to feed or drinking water can alleviate the heat stress of chicken by their effect of increasing water intake. Lasalocid, an ionophorous coccidiostat, was found to have the effect of increasing water consumption of chicken, thereby improving the lowered production performance of heat-stressed chicken. Finally, dietary fiber could be another possible element which can exert beneficial effects on heat-stressed chicken.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.601-610
• /
• 1998

This study was carried out to investigate the possibility of supplemental UV-B application to the hardening phase of container-grown Betula platyphylla seedlings. The containerized seedlings were grown in a growth chamber for four months and then treated with UV-B(UV-$B_{BE}$ $3.2KJ\;m^{-2}\;day^{-1}$ and $5.2KJ\;m^{-2}\;day^{-1}$) radiation and water stress regime(irrigation in one week interval) for four weeks. The differences in growth and physiological responses of the seedlings before and after the treatments were analyzed. UV-B radiation and water stress reduced height growth and leaf dry mass accumulation of the seedlings. The root collar diameter growth was reduced by UV-B radiation but increased by water stress. The reduction in leaf dry weight by UV-B radiation and water stress reduced T/R ratio of the seedling. The reduction in T/R ratio was the most apparent by water stress. Chlorophyll index observed by a chlorophyll meter was the lowest in the $5.2KJ\;m^{-2}\;day^{-1}$ of UV-B radiation, and those in the $3.2KJ\;m^{-2}\;day^{-1}$ and water stress were similar. UV-B radiation and water stress reduced both water content in the seedlings and leaf water potential, and increased leaf osmatic pressure. The water content of leaves and shoots was reduced more rapidly by UV-B radiation than by water stress treatment. In conclusion, growth responses and physiological changes in water relation by supplemental UV-B radiation which was applied to the hardening phase of container-grown Betula platyphylla seedlings were similar results to the water stress treatment.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.38-49
• /
• 2013

Prohexadione-calcium (Pro-Ca), ethephon and transient water stress were evaluated in a factorial design, as potential inhibitors of early-season shoot growth of high density orchard management of apple (Malus domestica Borkh.) trees. In the experiment, water stress was imposed to one-half of the 7-year-old 'Golden Delicious'/M.9 apple trees in each of 5 blocks, by stopping irrigation for 3 weeks between 35 and 56 days after full bloom (AFB). Within each whole unit, the following Pro-Ca and ethephon treatments were randomly allocated at $2{\times}2$ factorial: a) 0 or 250 $mg{\cdot}L^{-1}$ a.i. Pro-Ca applied at 28 days AFB and b) 0 or 300 $mg{\cdot}L^{-1}$ a.i. ethephon applied twice (35 and 71 days AFB). All trees were hand thinned to king flowers prior to treatments. Vegetative shoot growth was markedly reduced by Pro-Ca, with its effect being obvious within 14 days after application, while ethephon and water stress treatments were less effective. Pro-Ca had no effect on fruit set and yield but slightly increased fruit size. Ethephon substantially reduced the fruit size and yield but had no effect on fruit set. Water stress reduced fruit set, fruit size and yield. With regard to fruit quality, Pro-Ca did not influence fruit shape, flesh firmness and soluble solids contents (SSC) but slightly reduced titratable acidity. Ethephon had no effect on fruit shape but increased firmness, SSC and acidity, while water stress did not influence these fruit quality attributes. Dry weight of dormant spur buds was reduced by both Pro-Ca and water stress, while increased by ethephon. The larger dormant buds led to the larger spur flowers at the tight cluster stage the following spring. Return flowering was promoted only by ethephon, especially on previous season's shoots. There were no significant interactions between Pro-Ca and ethephon or water stress on most variables observed in this study.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.194-201
• /
• 1997

Recently with the rapid development in the industries such as an iron mill and chemical plants, these are enlarged by the use of the piping. This piping was encountered the stress corrosion cracking(SCC) because of stress by water pressure and residual stress of welding etc. under industrial water. In this paper, the behaviour of stress corrosion cracking on the weld zone of steel pipe piping water(SPPW) were investigated according to pre-heat before welding in natural seawater(specific resistance : 25$\Omega$-cm). The main results obtained are as follows :1) The stress corrosion cracking for SPPW and SB 41 is most ready to propagate in heat affected zone of weldment. 2) The SCC sensitivity of SPPW on weldment is more susceptible than that of SB 41. 3) The stress corrosion cracking growth of heat affected zone is delayed by the preheat and dry of base metal and electrode before welding.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.302-309
• /
• 2001

The effects of water stress on the development of Alpova dipiophloeus ectomycorrhizas and on the growth of nodulated Alnus rubra Bong seedlings were investigated. Five-day cyclic water stress significantly decreased the ectomycorrhizal development and the seedling growth. However, A. diplophloeus inoculated seedlings did not significantly differ from the non-inoculated seedlings in the growth and physiological activities under both well watered and water stressed conditions. $N_2$-fixation was less sensitive than $CO_2$ fixation to water stress. We conclude that under water stress conditions A. diplophloeus mycorrhizas do not contribute to the fitness of red alder seedlings.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4481-4490
• /
• 2022

In this study, a new rupture disk corrosion test (RDCT) method was developed for real-time detection of stress corrosion cracking (SCC) initiation of Alloy 600 in a primary water environment of pressurized water reactors. In the RDCT method, one side of a disk specimen was exposed to a simulated primary water at high temperature and pressure while the other side was maintained at ambient pressure, inducing a dome-shaped deformation and tensile stress on the specimen. When SCC occurs in the primary water environment, it leads to the specimen rupture or water leakage through the specimen, which can be detected in real-time using a pressure gauge. The tensile stress applied to the disk specimen was calculated using a finite element analysis. The tensile stress was calculated to increase as the specimen thickness decreased. The SCC initiation time of the specimen was evaluated by the RDCT method, from which result it was found that the crack initiation time decreased with the decrease of specimen thickness owing to the increase of applied stress. After the SCC initiation test, many cracks were observed on the specimen surface in an intergranular fracture mode, which is a typical characteristic of SCC in the primary water environment.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.849-859
• /
• 2022

Feed-water valves (FWVs) are used to regulate the flow rate of water entering steam generators, which are very important devices in nuclear power plants. Due to the working environment of relatively high pressure and temperature, there is strength failure problem of valve body in some cases. Based on the thermo-fluid-solid coupling model, the valve body stress of the feed-water valve in the opening process is investigated. The flow field characteristics inside the valve and temperature change of the valve body with time are studied. The stress analysis of the valve body is carried out considering mechanical stress and thermal stress comprehensively. The results show that the area with relatively high-velocity area moves gradually from the bottom of the cross section to the top of the cross section with the increase of the opening degree. The whole valve body reaches the same temperature of 250 ℃ at the time of 1894 s. The maximum stress of the valve body meets the design requirements by stress assessment. This work can be referred for the design of FWVs and other similar valves.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.87-97
• /
• 2022

The excessive settlement and deformation of disintegrated carbonaceous mudstone (DCM) embankments under dynamic loading have long been problems for engineers and technicians. In this work, the characteristics and mechanism of the plastic deformation of DCM under different degrees of compaction, water contents and confining pressures were studied by static triaxial, dynamic triaxial and scanning electron microscopy testing. The research results show that the axial stress increases with increasing confining pressure and degree of compaction and decreases with increasing water content when DCM failure. The axial strain at failure of the DCM decreases with increasing confining pressure and degree of compaction and increases with increasing water content. Under cyclic dynamic stress, the change in the axial stress level of the DCM can be divided into four stages: the stable stage, transition stage, safety reserve stage and unstable stage, respectively. The effects of compaction, water content and confining pressure on the critical axial stress level which means shakedown of the DCM are similar. However, an increase in confining pressure reduces the effects of compaction and water content on the critical axial stress level. The main deformation of DCM is fatigue cracking. Based on the allowable critical axial stress, a method for embankment deformation control was proposed. This method can determine the degree of compaction and fill range of the embankment fill material according to the equilibrium moisture content of the DCM embankment.