• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.181-192
• /
• 2010

A linear quantitative structure-property relationship (QSPR) model is presented for the prediction of rejection in permeation through membrane. The model was produced by using the multiple linear regression (MLR) technique on the database consisting of retention data of 25 pesticides in 4 different membrane separation experiments. Among the 3224 different physicochemical, topological and structural descriptors that were considered as inputs to the model only 50 were selected using several criteria of elimination. The physical meaning of chosen descriptor is discussed in detail. The accuracy of the proposed MLR models is illustrated using the following evaluation techniques: leave-one-out cross validation procedure, leave-many-out cross validation procedure and Y-randomization.

• Journal of Oriental Neuropsychiatry
• /
• v.15 no.2
• /
• pp.23-36
• /
• 2004

Objective : It is recently reported that enema therapy can be effective to enteric disease as well as painful disease, skin disease, immune disease. We look around many reports, books and make a comparative study of colon irrigation, coffee enema, retention enema. Method : I referred to many papers and books about three kinds of enema therapy. Results and Conclusions : 1. Colon irrigation remove fecal inpaction from colon and stimulate perisitalsis by injecting clean water to colon and also increase absorption ability. 2. Coffee enema inject coffee directly to colon, it is effective to detoxification, reducing pain by discharge of bile juice and toxic matters. 3. Retention enema use many kinds of suitable herb medicine to cure different disease by absorption to rectal mucous membrane. It is effective to acute, chronic disease, inflammatory disease.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.105-109
• /
• 2000

High-performance liquid chromatography is suitable for getting thermodynamic information about solute-solvent interactions. We used a squalane impregnated $C_{18}$ phase as a presumably bulk-like stationary phase to secure a simple partition mechanism for solute retention in reversed phase liquid chromatographic system. We measured retention data of some selected solutes (benzene, toluene, ethylbenzene, propylbenzene, butylbenzene, phenol, benzylalcohol, phenethylalcohol, benzylacetone, acetophenone, benzonitrile, benzylcyanide) at 25, 30, 35, 40, 45, and 50 $^{\circ}C$ in 30/70, 40/60, 50/50, 60/40 and 70/30 (v/v%) acetonitrile/water eluents. The van't Hoff plots were nicely linear, thus we calculated dependable thermodynamic values such as enthalpies and entropies of solute transfer from the mobile phase to the stationary phase based on more than four retention measurements on different days (or weeks). We found that the cavity formation effect was the major factor in solute distribution between the mobile and stationary phases in the system studied here. Our data were com-pared with some relevant literature data.

• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.83-93
• /
• 2014

This research was carried out for suggesting design criteria and procedure for maximizing flood control capacity by building flood control facilities like flood retention basin built in connection with existing facilities in order to cope with increased uncertainty due to factors such as urbanization and climate change. We suggested the procedure for the analysis under the various scenarios applicable for the cases of determining retention basin capacity as provision for the flood water level increase in main river channel or estimating flood water level reduction effect when retention basin capacity is given. Procedure for estimating design flood hydrograph at any duration using Intensity-Duration-Quantity (IDQ) originated from the existing IDF, and its application example were provided. Based on rainfall estimated by the IDQ analysis, it is possible to calculate an equivalent peak hydrographs under various scenarios, e.g. lower frequency hydrograph under same rainfall duration with water level higher than existing hydrograph, hydrograph with same peak and higher volume due to increased rainfall duration, hydrograph with higher peak and volume than existing hydrograph, etc.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.401-408
• /
• 2018

EQPS (Effluent Quality Prediction System, Dynamita, France) was applied to analyze the appropriateness of the design of a bioreactor in A sewage treatment plant. A sewage treatment plant was designed by setting the design concentration of the secondary clarifier effluent to total nitrogen and total phosphorus, 10 mg/L and 1.8 mg/L, respectively, in order to comply with the target water quality at the level of the hydrophilic water. The retention time of the 4-stage BNR reactor was 9.6 hours, which was 0.5 for the pre-anoxic tank, 1.0 for the anaerobic tank, 2.9 for the anoxic tank, and 5.2 hours for the aerobic tank. As a result of the modeling of the winter season, the retention time of the anaerobic tank was increased by 0.2 hours in order to satisfy the target water quality of the hydrophilic water level. The default coefficients of the one step nitrification denitrification model proposed by the software manufacturer were used to exclude distortion of the modeling results. Since the process modeling generally presents optimal conditions, the retention time of the 4-stage BNR should be increased to 9.8 hours considering the bioreactor margin. The accurate use of process modeling in the design stage of the sewage treatment plant is a way to ensure the stability of the treatment performance and efficiency after construction of the sewage treatment plant.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.19-31
• /
• 2011

This study had been carried out to investigate spatial and temporal variations of the concentrations of trace metals for contaminated surface water in creek affected by leachate from the tailings impoundment of the Yeonhwa II mine for about 2 years. It was also to ascertain the metal removal efficiency for potentially deleterious metals by the artificial and natural attenuation processes such as retention ponds and hydrologic mixing of uncontaminated tributaries. The concentrations of As, Pb, Cd, and Cu for leachate in the rainy season were not detected. On the other hand, the concentrations of Zn, Fe, Mn, Al, and $SO_4^{2-}$ in the rainy season for leachate were 2-66 times higher than those in the dry season, due to the oxidation of the sulfide minerals and the dissolution of the secondary minerals. The concentrations of Zn and Cd for leachate and surface water of the upper creek in the rainy season exceeded the criteria of River Water Quality and Drinking Water Quality but in the dry season, those of analyzed all the metals (As, Pb, Cd, Cu, Zn, Cd, Fe, Mn, and Al) for surface water sampled at the study area were below the criteria of River Water Quality and Drinking Water Quality. In regard of the attenuation efficiency for the concentrations of metals, Fe, Mn, Al, Zn, Cd, As, and Cu were removed highly at retention ponds, while the removal efficiency for major cations and sulfate ($SO_4^{2-}$) were related to mixing of the uncontaminated tributaries. Therefore, the major attenuation processes of the metal and sulfate contents in creek affected by leachate from a tailing dump were precipitation (accompanied by metal co-precipitation and sorption), water dilution, and neutralization.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.67-75
• /
• 1998

The purpose of this study is to develop a system for treating industrial wastewater with high carbonaceous and nitrogenous materials. To investigate the potential of using this system, a number of experiments are conducted for about 7 months with the varieties of COD and $NH_3-N$ concentrations, and hydraulic retention time. In the system, 1,500mg/L of COD is remover over 95% in a retention time as low as 9 hours, and the $NH_3-N$ removal efficience is nearly 100% with 90mg/L of $NH_3-N$ in the influent. These results illustrate that the system can effectively be used to treat industrial wastewater containing high concentration of COD and $NH_3-N$.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.82-86
• /
• 1996

This study was performed to elucidate the effect of degree of substitution and degree of polymerization of CMC on the rheological characteristics of coating color which is consisted of calcium carbonate as pigment. The results were as follows: 1. It appeared that DP of CMC rather DS has an effect on the low shear viscosity of coating color. 2. According as shear rate increased, the effect of DP and DS on high shear viscosity of coating color decreased. 3. According to increasing DS and DP, the water retention of coating color increased.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.860-865
• /
• 2006

The quality parameters of sponge cake supplemented with soy protein concentrate (SPC) were evaluated. The addition of SPC to wheat flour increased the protein content and alkaline water retention value, but decreased the sedimentation value. Protein content had a positive correlation with the alkaline water retention value, and a negative correlation with the sedintentation value. The higher the concentration of SPC, the higher the RVA pasting temperature and the lower the viscosity. Increasing the level of SPC in flour led to a decrease in mixogram peak time, whereas peak height, width at peak, and width at 8 min progressively increased. As the amount of SPC increased in the formulation, the pH and specific gravity of cake batter increased, whereas the volume and specific volume of sponge cake decreased. The total isoflavones content in SPC increased after heat treatment. The hardness, gumminess, and chewiness increased progressively in accordance with increasing level of SPC.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.