• 상하수도학회지
• /
• 제19권2호
• /
• pp.181-192
• /
• 2005

This study evaluated the effect of factors influencing the initial biofilm formation in drinking water distribution pipe by running experiments using a $2^{4-1}$ fractional factorial experimental design with a replicate. Important variables used for assessing biofilm formation included BDOC(biodegradable dissolved organic carbon), viable heterotrophic bacteria present in drinking water, water temperature, and shear stress at two levels each. Based on the statistical analysis of biofilm levels measured as attached HPC(heterotrophic plate count) and community-level assay, the main factors that have significant effects on biofilm formation were found to be viable heterotrophic bacteria and BDOC. Water temperature only exhibited significant effect on the levels of attached HPC, while shear stress was not a significant factor under given conditions. Moreover, the statistical analysis revealed that interactions between the important variables were not statistically significant at a 0.05 significance level.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• 상하수도학회지
• /
• 제10권2호
• /
• pp.88-103
• /
• 1996

The objective of this study is to develop stochastic and deterministic models which could be used to synthesize water application time series. Adaptive models using mulitivariate ARIMA(Transfer Function Model) are developed for daily urban water use forecasting. The model considers several variables on which water demands is dependent. The dynamic response of water demands to several factors(e.g. weekday, average temperature, minimum temperature, maximum temperature, humidity, cloudiness, rainfall) are characterized in the model by transfer functions. Daily water use data of Kumi city in 1992 are employed for model parameter estimation. Meteorological data of Seonsan station are utilized to input variables because Kumi has no records about the meteorological factor data.To determine the main factors influencing water use, autocorrelogram and cross correlogram analysis are performed. Through the identification, parameter estimation, and diagnostic checking of tentative model, final transfer function models by each month are established. The simulation output by transfer function models are compared to a historical data and shows the good agreement.

• 물과 미래
• /
• 제28권3호
• /
• pp.197-204
• /
• 1995

인구의 도시집중으로 인하여 유역의 유출용적이 증대하며 이로 인한 합류부의 수위상승으로 내수배제가 불가능하게 되어 침수피해가 발생하고 있다. 본 실험연구에서는 소유역 하천에서 우수거의 합류로 인한 본류하천의 흐름변화를 실험하였으며, 하천의 수위상승을 소하천(본류)의 유량과 경사, 우수거(지류)의 유량과 경사 및 합류각에 따른 본류의 수위상승을 분석하였다. 실험결과 본류하천의 경사에 대해서는 경사가 급할수록 수심비가 증대하는 것으로 나타났으며, 본류의 유량은 적을수록, 지류의 유량은 많을 수록 수심비는 크게 나타났다. 합류각에 대해서는 합류각이 작을수록 수심비가 작은값을 나타내고 있다. 이와 같이 도시 소하천의 합류시 수심비의 상승영향을 보면 합류각, 지류유량 및 본류유량 등의 순으로 상승영향이 밀접하게 나타났다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.1-1
• /
• 2018

• 미생물학회지
• /
• 제29권6호
• /
• pp.361-370
• /
• 1991

Physical and chemical environmental factors influencing on the outbreak of freshwater red tide by Peridinium bipes (dinoflagellate) in Soyang Reservoir were studied. Red tide occured in the site of inflowing of tributary streams annually, but the extent and severity of red tide varied from year to year. Several environmental factors such as water level, nutrient releasing from sediment, cyst resuspension, and concentrations of $Ca^{2+}$ and $Mg^{2+}$were studiedin relation to development, extent, and duration of red tide. In June of 1989 and 1991, the red tides of Peridinium bipes were very severe, and these red tides coincided with notable and rapid drawdown of lake water in late spring. Nutrient releasing and cyst resuspension by turbulence during drawdown were suggested as main causes of red tide. The quanity of nutrient releasing from sediment and hydrometeorological factors such as run-off and wind may determine the extent and duration of red tide.

• 한국수자원학회논문집
• /
• 제35권3호
• /
• pp.251-259
• /
• 2002

본 연구에서는 구형 수로 내에서 횡월류가 발생할 때, 그 흐름 특성의 변화를 연구하였다. ADI 기법을 이용한 2차원 천수방정식을 수치해석하여 횡월류웨어 주변의 수심 및 유속변화, 월류량에 영향을 미치는 인자들을 검토하였다. 월류량에 가장 직접적인 영향을 미치는 인자인 유량계수는 웨어의 기하학적 특성 이외에 본류의 후르드수와 웨어부 시작점에서의 본류 수심의 영향을 받는다. 웨어부 시작점에서의 후르드수와 본류의 후르드수 사이의 상관관계 및 웨어부 시작점에서의 수심과 본류 수심의 상관 관계를 알아내어 실제 웨어 설계에 이용할 수 있는 유량계수를 제안하였다.

• 한국해양학회지
• /
• 제11권1호
• /
• pp.1-8
• /
• 1976

피조개, Anadara broughtonii(SCHRENCK)는 근년에 와서 산업적 가치가 높아짐에 따라 중요 양식대상종으로 많은 연구의 대상이 되고 있다. 인공 및 천연채묘에 관해서는 관야91963), 이등 외(1967), 금정 외(1969), 전중(1971)등의 연구와 중간양성에 관해서는 관야 외91966)의 연구가 보고되고 있으며 유91969, 1970)는 먹이 및 성장에 관해서 보고한 바 있다. 본고에서는 피조개의 산란 및 유생의 출현상황과 분표에 영향을 미칠것으로 추측되는 몇가지 환경요인을 관찰하여 검토한 결과를 보고한다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.151-154
• /
• 2017

In this article, we investigated the various influencing factors that degraded the lifetime of suspension insulators in 154 kV transmission lines, and showed the possible solutions to avoid such breakdowns. With respect to achieve safety, reliability and aesthetical considerations, the characteristics of transmission and distribution network power cables should be improved. Suspension insulators are particularly important to study, as they have developed to be the main component of transmission lines due to their ability to withstand the electrical conductivity of high-voltage power transmission. Suspension insulators are mostly made from glass, rubber and ceramic material due to their high resistivity. In Korea, porcelain suspension insulators are typically used in the transmission line system, as they are cheaper and more flexible compared to other types of insulators. This is effective from preventing very high and steep lightening impulse voltages from causing the breakdown of suspension insulators used in power lines. Other influential factors affect the lifetime of suspension insulators that we studied include temperature, water moisture, contamination, mechanical vibration and electrical stress.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.287-290
• /
• 2022

Compressed-water-type launching devices convert the force from compressed water into force-launching underwater structures, such as torpedos and autonomous underwater vehicles. In particular, the overpressure wave in the launching tube is a critical design factor for the launching device. This paper presents a simplified formula for simulating overpressure waves in the launching tube of a compressed-water-type launching device. Scaled model experiments were performed to obtain actual measurement data of overpressure waves in a launching tube with varying piston speeds to examine the practical applicability of the simplified formula. The main factor of the simplified formula was estimated using an optimization technique. The time history of the overpressure waves was satisfactorily simulated using the estimated factor values and showed consistency with the measurement data. In addition, the trend of change by the piston speed of the estimated factors was reviewed, and the practical applicability was demonstrated. A systematic study of the factors influencing the overpressure waves in launching tubes will be possible using experimental data for more various conditions and the proposed simplified formula.