• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.181-192
• /
• 2005

This study evaluated the effect of factors influencing the initial biofilm formation in drinking water distribution pipe by running experiments using a $2^{4-1}$ fractional factorial experimental design with a replicate. Important variables used for assessing biofilm formation included BDOC(biodegradable dissolved organic carbon), viable heterotrophic bacteria present in drinking water, water temperature, and shear stress at two levels each. Based on the statistical analysis of biofilm levels measured as attached HPC(heterotrophic plate count) and community-level assay, the main factors that have significant effects on biofilm formation were found to be viable heterotrophic bacteria and BDOC. Water temperature only exhibited significant effect on the levels of attached HPC, while shear stress was not a significant factor under given conditions. Moreover, the statistical analysis revealed that interactions between the important variables were not statistically significant at a 0.05 significance level.

• Membrane and Water Treatment
• /
• v.10 no.6
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.88-103
• /
• 1996

The objective of this study is to develop stochastic and deterministic models which could be used to synthesize water application time series. Adaptive models using mulitivariate ARIMA(Transfer Function Model) are developed for daily urban water use forecasting. The model considers several variables on which water demands is dependent. The dynamic response of water demands to several factors(e.g. weekday, average temperature, minimum temperature, maximum temperature, humidity, cloudiness, rainfall) are characterized in the model by transfer functions. Daily water use data of Kumi city in 1992 are employed for model parameter estimation. Meteorological data of Seonsan station are utilized to input variables because Kumi has no records about the meteorological factor data.To determine the main factors influencing water use, autocorrelogram and cross correlogram analysis are performed. Through the identification, parameter estimation, and diagnostic checking of tentative model, final transfer function models by each month are established. The simulation output by transfer function models are compared to a historical data and shows the good agreement.

• Water for future
• /
• v.28 no.3
• /
• pp.197-204
• /
• 1995

The runoff from an urban catchment is increased because of the gravitation of the population towards cities. For this reason, water level increment in confluence area makes it impossible to drain internal water and thus produces flood out in upstream areas. In this study, flow variations of main channel are measured which is caused by combining storm sewer into main channel in small watershed. Depth increment in main stream is analyzed due to flowrate and slope in main channel and flowrate, slope is getting steeper, and also due to low flowrate in main stream and high flowrate in tributrary channel. For the degree of confluence, depth ratio decreases when the degree is getting small. As mentioned above, main factors influencing the depth ratio increment of confluence channel are in the order of the degree of confluence, and the flowrate of tributary channel and main channel.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.1-1
• /
• 2018

• Korean Journal of Microbiology
• /
• v.29 no.6
• /
• pp.361-370
• /
• 1991

Physical and chemical environmental factors influencing on the outbreak of freshwater red tide by Peridinium bipes (dinoflagellate) in Soyang Reservoir were studied. Red tide occured in the site of inflowing of tributary streams annually, but the extent and severity of red tide varied from year to year. Several environmental factors such as water level, nutrient releasing from sediment, cyst resuspension, and concentrations of $Ca^{2+}$ and $Mg^{2+}$were studiedin relation to development, extent, and duration of red tide. In June of 1989 and 1991, the red tides of Peridinium bipes were very severe, and these red tides coincided with notable and rapid drawdown of lake water in late spring. Nutrient releasing and cyst resuspension by turbulence during drawdown were suggested as main causes of red tide. The quanity of nutrient releasing from sediment and hydrometeorological factors such as run-off and wind may determine the extent and duration of red tide.

• Journal of Korea Water Resources Association
• /
• v.35 no.3
• /
• pp.251-259
• /
• 2002

Flow characteristics occurring a side-weir overflow in rectangular channel is investigated in this study. A numerical model based on the two -dimensional shallow-water equations is employed to review the factors influencing on the side- weir overflow discharge and the change of flow depths and velocities. It is found that the discharge coefficient which has the most significant influence on the overflow is affected by geometric characteristics of a side-weir, Froude number of the main channel flow and the flow depth of the main channel at the starting point of a side-weir. And the discharge coefficient applicable to a practical design of a side-weir is proposed by deriving a relationship between Froude number of the main channel flow at the starting point of a side-weir and Froude number of the main channel flow.

• 한국해양학회지
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1976

This work concerns ecological studies on the larvae of the ark shell, Anadara broughtonii(SCHRENCK), in the aea adjacent to Gajyo-do in Jinhae Bay. Marine environmental factors, namely, temperatue, salinity, depth, and tidal current were observed in connection with the larval distributions. Water temperature appeared to be one of the main factors that influence the spawning activity. The numbers of the drifting larvae fluctuated greatly during the study period. The trend, however, was for numbers to be low in early summern, increasing in mid summer, and reaching a peak in late summer, at high bottom water temperature and low bottom salinities. Significantly increased numbers of the drifting larvae were observed during the period in which the bottom water temperatures and salinities were very close to those at the surface. the numbers of the drifting larvae showed a positive relationship with velocities of the water mass within the range of 0∼20 cm/sec. It was also noticed that the drifting larvae were relatively abundant in the area of eddy motion.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.151-154
• /
• 2017

In this article, we investigated the various influencing factors that degraded the lifetime of suspension insulators in 154 kV transmission lines, and showed the possible solutions to avoid such breakdowns. With respect to achieve safety, reliability and aesthetical considerations, the characteristics of transmission and distribution network power cables should be improved. Suspension insulators are particularly important to study, as they have developed to be the main component of transmission lines due to their ability to withstand the electrical conductivity of high-voltage power transmission. Suspension insulators are mostly made from glass, rubber and ceramic material due to their high resistivity. In Korea, porcelain suspension insulators are typically used in the transmission line system, as they are cheaper and more flexible compared to other types of insulators. This is effective from preventing very high and steep lightening impulse voltages from causing the breakdown of suspension insulators used in power lines. Other influential factors affect the lifetime of suspension insulators that we studied include temperature, water moisture, contamination, mechanical vibration and electrical stress.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.287-290
• /
• 2022

Compressed-water-type launching devices convert the force from compressed water into force-launching underwater structures, such as torpedos and autonomous underwater vehicles. In particular, the overpressure wave in the launching tube is a critical design factor for the launching device. This paper presents a simplified formula for simulating overpressure waves in the launching tube of a compressed-water-type launching device. Scaled model experiments were performed to obtain actual measurement data of overpressure waves in a launching tube with varying piston speeds to examine the practical applicability of the simplified formula. The main factor of the simplified formula was estimated using an optimization technique. The time history of the overpressure waves was satisfactorily simulated using the estimated factor values and showed consistency with the measurement data. In addition, the trend of change by the piston speed of the estimated factors was reviewed, and the practical applicability was demonstrated. A systematic study of the factors influencing the overpressure waves in launching tubes will be possible using experimental data for more various conditions and the proposed simplified formula.