• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.476-485
• /
• 1999

In order to evaluate the gravity-injection capability to maintain core cooling after a loss-of-shutdown-cooling event during shutdown operation, the plant conditions of the Yong Gwang Units 3&4 were reviewed. The six cases of possible gravity-injection paths from the refueling water tank (RWT) were identified and the thermal-hydraulic analyses were performed using the RELAP5/MOD3.2 code. The core cooling capability was significantly dependent on the gravity-injection path, the RCS opening, and the injection rate. In the cases with the pressurizer manway opening higher than the RWT water level, the coolant was held up in the pressurizer and the system pressure continued increasing after gravity-injection. The gravity injection eventually stopped due to the high system pressure and the core was uncovered. In the cases with the injection path and opening on the same leg side, the core cooling was dependent on whether the water injected from the RWT passed the core region or not. However, in the cases with the injection path and opening on the different leg side, the system was well depressurized after gravity-injection and the core boiling was successfully prevented for a long-term transient. In addition, from the sensitivity study on the gravity-injection flow rate, it was found that about 54 kg/s of injection rate was required to maintain the core cooling and the core cooling could be provided for about 10.6 hours after event with that injection rate from the RWT. Those analysis results would provide useful information to operators coping with the event.

• 한국가스학회지
• /
• 제1권1호
• /
• pp.101-105
• /
• 1997

LPG 지하저장기지에서 클로깅 현상이 발생할 경우 저장공동 주위의 지하수위가 설계된 수치보다 낮아져 저장물이 누출되므로 이에 대한 감지가 필수적이라 할 수 있다. 따라서 본 연구에서는 클로깅 현상이 실제로 발생하였을 경우 저장기지에서 관측할 수 있는 관측인자인 공동주변 지하수위, 수벽공 주입수량, 공동 삼출수량들의 변화양상을 고찰하기 위하여 지하저장기지를 모사한 모형실험장비를 제작하여 각 인자들의 변화 측정실험을 수행하였다. 클로깅 발생시 관측인자의 변화양상은 다음과 같다. 지하수위는 공동의 압력이 커짐에 따라 증가하고 클로깅이 심할수록 감소하는데, 클로깅 발생을 지하수위 변화에 의해서 보다 잘 감지하려면 공동의 압력을 가능한 낮게 하고, 공동 운영 초기의 지하수위와 현재 운영 상태의 지하수위를 비교해 보는 것이 바람직하다. 클로깅에 의한 지하수위의 감소는 수벽공의 압력이 커질수록 다소 둔화된다 현탁물질에 의한 클로깅이 심할수록 주입수량과 삼출수량은 선형적으로 감소하는데 주입수량의 감소율이 삼출수량의 감소율보다 크게 나타난다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.628-636
• /
• 2005

In this paper. the effects of a WI(Water Injection) in the intake pipe for a 4-cylinder Dl(Direct Injection) diesel engine are investigated experimentally, The WI system was controlled by the duty cycle from the intake manifold's temperature and MAF(Manifold Air Flow) First. effect of EGR on NOx reduction was investigated. Then WI system was applied to reduce NOx As the results. we can make the NOx map and visualize the NOx results by variation of engine speed and engine load It was known that effect of WI system on NOx reduction without the EGR was better than the with EGR base engine except of low load and speed condition.

• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.984-990
• /
• 2022

Corrosion release behavior of Alloy 690 in high-temperature water was investigated under the conditions of injected Zn concentrations of 0 ppb, 10 ppb and 50 ppb. A protective oxide film composed of Zn(Fe_xCr_1-x)₂O₄ and Cr₂O₃ was formed with Zn injection, resulting in a better corrosion resistance. In comparison with the Zn-free condition, the corrosion release rate under the Zn-injection conditions was smaller. The corrosion release inhibiting factors were 1.7 and 1.9 under the conditions of 10 ppb and 50 ppb Zn-injection respectively. A foreseen application of the corrosion and corrosion release rates has been proposed and discussed.

• 한국방재안전학회논문집
• /
• 제14권1호
• /
• pp.61-72
• /
• 2021

최근 기후변화로 인한 가뭄발생으로 국지적인 물부족 문제 해결을 위해 안정적인 지하수를 활용한 물공급 방안의 필요성이 증가하고 있으며 이에 대한 대안으로 지하수 인공함양 기술이 대두되고 있다. 본 연구에서는 기상조건 및 목표취수량, 함양정의 주입량, 주입기간 등을 고려한 함양 시나리오를 반영하여 수치모델링을 통해 인공함양-취수 시스템의 함양능력 평가와 최적 운영조건을 도출하여 가뭄발생에 대비한 농업용수의 효율적인 공급과 안정적인 용수확보를 위한 정량적인 평가기법을 도출하고자 하였다. 이에 함양정의 함양능력을 평가하기 위해 물수지 분석으로부터 도출된 목표취수량을 고려한 총 주입량 10,000 ton의 조건하에서 주입 시나리오별(Case 1~4)로 주입정 및 관측정별 지하수위 변화를 모사한 결과 주입 후 유역 내 지하수위는 약 25~42일간 유지되는 것으로 나타났다. 이 중 Case 3의 경우 지표하 1 m 미만으로 지하수위가 상승하여 적정 주입량은 50 m³/day가 적절한 것으로 모사되었으며 함양수 주입에 의한 지하수위 상승에 따른 영향범위는 113.5 m로 예측되었다. 또한 함양 시나리오에 따른 하류부 저투수성 벽체(LPB) 설치 전후의 유역내 함양능력 변화는 설치 전 대비 지하수 저류량은 약 6배가량 증가하였고 지하수 체류시간은 약 4배 정도 증가하는 것으로 모사되었다. 본 연구결과는 향후 가뭄대응을 위한 안정적인 농업용수 공급 및 지속적인 수자원 확보에 크게 기여할 것으로 기대된다.

• 설비공학논문집
• /
• 제15권4호
• /
• pp.305-311
• /
• 2003

DOP aerosol particles with geometric mean diameter of 0.5-3.0 ${\mu}{\textrm}{m}$, geometric standard deviation of 1.1-1.3 and total number concentration of 1,500-8,000 Particles/㎤ were used to determine collection efficiencies of a packed wet scrubber with respect to particle size. The tested operating variables included air velocity and water injection rate. It was shown from the experimental results that the collection efficiencies increased with increasing water injection rate and decreasing air velocity. Meanwhile, as for the particle size variation, all of the collection efficiency curves increased rapidly between 0.57-1.41${\mu}{\textrm}{m}$ for the range of water injection rate above 30 L/min. It was also seen that the collection efficiency of a packed wet scrubber is mainly governed by the mechanism of inertial impaction.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권4호
• /
• pp.141-148
• /
• 2009

Afterfogging of the regenerative gas turbine system has an advantage over inlet fogging in that the high outlet temperature of air compressor makes the injection of more water and the recuperation of more exhaust heat possible. This study investigates the effects of turbine inlet temperature (TIT) on the performance of regenerative gas turbine system with afterfogging through a thermodynamic analysis model. For the standard ambient conditions and the water injection ratios up to 5%, the variation of system performance including the thermal efficiency is numerically analyzed with respect to the variations of TIT and pressure ratio. It is also analyzed how the maximum thermal efficiency, net specific work, and pressure ratio itself change with TIT at the peak points of thermal efficiency curve. All of these are found to increase almost linearly with the increases of both TIT and water injection ratio.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.415-422
• /
• 2008

Drinking water treatment is enhanced by coagulant dosages and chlorine injection because of pH increase in raw water in droughty seasons such as spring and fall. But water quality deterioration is occurred by increase in residual aluminium and disinfection by-products. Coagulation process can be used to control natural organic matter (NOM) during water treatment. The effect of coagulation process appeared to depend on the pH of water rather than coagulant dosages. In this study, for water treatment in high pH season $H_2SO_4$ was applied for pH adjustment at full scale. Before and after pH adjustment by $H_2SO_4$ injection, water quality of drinking water was evaluate. In the result of investigation of total organic carbon (TOC) removal in high pH season, TOC was removed approximately 30~40%, which showed decrease in water treatment efficiency. Also, it is increased both particle numbers and residual Al concentration in the water. After $H_2SO_4$ injection for adjustment to pH<7.5 in settled water, treated water turbidity decreased in 0.047 NTU from 0.059 NTU, and particle numbers of filtered water decreased in 20/mL from 90/mL. On the other side, TOC removal efficiency increased in approximately 10% after adjustment of pH. In the result of decrease in pH in raw water through more coagulants and prechlorine without $H_2SO_4$ injection, trihalomethanes (THMs) concentration increased in $16{\mu}g/L$ from $8{\mu}g/L$.