• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.873-882
• /
• 2021

In this study, a study was conducted to develop a system for predicting/responding to black ice occurring on roads in winter. Tests conditions were studied by making models of cement concrete pavement and asphalt concrete pavement. In order to freeze water on the manufactured model package, an tests was conducted at a temperature below zero using a freezer, and the freezing process was photographed using a thermal imaging camera. Black ice is generated when water is present on the road surface and the temperature is below freezing or the road surface temperature is below the dew point temperature. Under sub-zero conditions, the pavement, water, and ice were classified with a thermal imaging camera. As a result of the tests, it was possible to distinguish with a thermal imaging camera at a temperature below freezing in the same freezer due to the difference in the emissivity of the packaging, water, and ice. In the process of changing from water to ice during the tests, it was analyzed that ice and water were clearly distinguished by the thermal imaging camera due to the difference in emissivity and reflectance, so black ice could be predicted using the thermal imaging camera.

• 한국수산과학회지
• /
• 제50권5호
• /
• pp.506-519
• /
• 2017

This study evaluated the protein recovery and functional properties and biological activity of boiled and steamed process water (BPW and SPW, respectively) generated from the preparation of concentrated roe of bastard halibut (BH; Paralichthys olivaceus), skipjack tuna (ST; Katsuwonus pelamis), and yellowfin tuna (YT; Thunnus albacares) using the cook-dry process. The protein loss from the water extracts (EXT) of 100 g of roe protein was 15.05-19.71% and was significantly (P<0.05) higher than that of BPW (5.47-10.34%) and SPW (3.88-8.18%). The foam capacity of BPW (166-203%) and SPW (15-194%) was better than that of EXT. The emulsifying activity index of the original samples was lower than those ($15.40-107.86m^2/g$) of diluted protein samples. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and the reducing power of BPW and SPW were stronger than those of EXT. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) radical scavenging activity of EXT (0.028-0.045mg/mL) was significantly higher those of BPW and SPW. The angiotensin I-converting enzyme (ACE) inhibitory activity of SPW was the highest for BH (1.04 mg/mL), followed by YT and ST. The predominant amino acids in SPW were Glu, Ala, Leu, and His. These results demonstrate that processing water containing diluted organic components, including protein, can be consumed directly by humans as a functional reinforcing material after appropriate concentration processes.

• 윤활유협회보
• /
• 36호
• /
• pp.3-8
• /
• 1989

• 한국환경보건학회지
• /
• 제41권5호
• /
• pp.305-313
• /
• 2015

Objectives: The objective of this study is to identify toxicants causing acute toxicity in effluents from the aluminum rolling industry that violate the discharge limits in Korea. Methods: Whole effluent toxicity tests (WET) were conducted on effluent discharged from the aluminum rolling industry following the US EPA WET test methods. We collected effluent samples three times and evaluated acute toxicity by using Daphnia magna. We employed toxicity identification evaluation (TIE) procedures to identify toxicants causing toxicity in the effluent. Results: No specific chemical groups were identified in the seven different manipulations applied to the of wastewater effluent samples showing 1.3 toxic units (TU) according to the TIE phase I procedures. Water quality parameters for water hardness, electric conductivity and heavy metals (Mn) were 4,322 mg/l as $CaCO_3$, 11.39 mS/cm, and $5,551{\mu}g/l$, respectively. Considering water hardness and reference toxicity, high concentrations of Mn can be disqualified from the causative toxicants. Consequently, high ionic concentrations of $Na^+$(1,648 mg/l), $Ca^{2+}$(1,048 mg/l), $Mg^{2+}$(1,428 mg/l) and $SO_4{^{2-}}$(7,472 mg/l) were identified to be causative toxicants. Water hardness and electric conductivity exceed the $EC_{50}$ value obtained by biological toxicity tests using Daphnia magna. Conclusion: According to TIE procedures, high salt concentration is determined to be a major toxicant in the effluent of agro-industrial wastewater treatment plants receiving wastewater from the aluminum rolling industry.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.336-343
• /
• 2019

Effects of a novel mold inhibitor specifically for bamboo, on the properties of composite products have been confirmed in this study. The mechanical and dimensional stability properties of bamboo fiber-based composites (BFBCs) from different bamboo species were also investigated. The results showed that Burmanica Gamble possessed the highest values of modulus of elasticity (MOE) of 33.2 GPa, modulus of rupture (MOR) of 286.9 MPa, compressive strength of 182.6 MPa and shear strength of 24.0 MPa. By contrast, Phyllostochys heterocycla among all of species showed the lowest MOE of 16.3 GPa, MOR of 170.3 MPa and compressive strength of 128.9 MPa were the lowest among all of species. Moreover, there is a remarkable variation in the swelling and water absorption between the samples with 4 h and 28 h water immersion treatment, especially Phyllostachys iridenscens. Overall, the results suggested that TCIT (Tebuconazole and 3(2H)-isothiazolone) had no significant effect on the mechanical properties compared with the control condition, and it would be utilized as an antimould of BFBCs manufacturing.

• 한국어류학회지
• /
• 제35권4호
• /
• pp.236-243
• /
• 2023

본 연구는 조피볼락 치어를 대상으로 인위적인 수온 상승에 따른 생존율, 혈중 cortisol, glucose, GOT, GPT 농도 및 아가미와 간의 조직학적 변화를 조사하였다. 실험 수온은 26℃, 28℃, 30℃ 및 31℃로 설정하였고, 수온은 23℃ (initial)~28℃까지는 1일에 1℃씩, 28~31℃까지는 3일에 1℃씩 조절하였다. 실험은 각 실험 수온에서 7일 동안 수행하였고, 실험기간 동안 먹이는 공급하지 않았다. 그 결과, 26℃와 28℃는 폐사가 발생하지 않았으나, 30℃는 노출 4일째부터 폐사가 발생하여 실험종료 시 1.5%의 생존율을 보였고, 31℃는 노출 1일째부터 폐사가 발생하여 노출 2일째 전량 폐사하였다. 혈중 스트레스 관련 지표를 분석한 결과, 혈중 cortisol과 glucose 농도는 수온이 높을수록 증가하였고, 31℃에서 initial보다 유의하게 감소하였다(p<0.05). 혈중 GPT 농도는 모든 실험구 사이에 유의한 차이를 보이지 않았으나(p<0.05), 혈중 GOT 농도는 31℃에서 유의하게 증가하였다(p<0.05). 간과 아가미의 조직학적 관찰 결과, 간과 아가미는 모두 23℃ (initial) 및 26℃에서 정상적인 조직상을 보였으나, 28℃는 간세포의 비대화 및 아가미 새판 상피세포의 증식과 새판 상피의 탈락, 30℃는 간세포들이 응축 및 아가미 새판의 융합, 31℃는 간 조직 내 충혈 및 일부 간세포의 괴사 및 아가미 새엽과 새판의 괴사가 관찰되었다.

• 한국식품영양과학회지
• /
• 제33권4호
• /
• pp.609-613
• /
• 2004

본 연구는 정향추출물(물, 메탄올 및 에테르)의 항산화 효과를 리놀레인산 기질 및 리놀레인산 에멀젼기질에서 비교, 검토하였다. 물, 메탄올 및 에테르용매에 따른 정향의 총페놀 함량은 23.1, 42.8, 34.9%로 메탄올＞에테르＞물 추출물 순이었다. Eugenol 함량은 메탄올 추출물의 경우 6.1%이었고 에테르 추출물 8.1%이었으며 물 추출물에서는 검출되지 않았다. 정향 추출물의 DPPH 소거효과는 물 추출물 경우 36.1%, 메탄을 추출물의 경우 30.9%, 에테르 추출물의 경우 29.7%로 나타났다. 리놀레인산 기질에서의 항산화 효과는 BHT＞에테르 추출물＞ $\alpha$-tocopherol＞메탄올 추출물＞물 추출물의 순이었다. 리놀레인산 에멀젼 시스템에서의 항산화 효과는 BHT＞물 추출물＞메탄올 추출물＞에테르 추출물＞ $\alpha$-tocopherol의 순이었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권3호
• /
• pp.236-246
• /
• 2014

해양심층수는 저온성, 미네랄성, 청정성 등의 고유의 특성이 산업활용의 포인트가 되고 있다. 우리나라의 경우, 2008년을 기점으로 해양심층수 산업이 형성되어 현재에 이르고 있으나, 산업의 성장기 정착과 성숙기 진입 단계에는 아직 이르지 못하고 있는 실정이다. 이러한 해양심층수 산업 정체의 요인으로는 먹는물 위주로 편중된 산업구조와 함께, 동일한 산업군과의 경쟁력이 미흡하여 산업계의 매출이 부진한데서 기인하는 것으로 분석되고 있다. 우리나라보다 먼저 해양심층수 자원개발과 산업을 안착시킨 일본 등의 국가는 공통적으로 해양심층수 자원의 고부가가치화 및 신산업 지원을 위한 방안으로 새로운 기술을 개발하고 해양심층수 자원의 응용범위를 확대하고 있다. 본 고는 해양심층수 주요개발 국가의 특허를 정량적으로 분석하여 이들 국가의 해양심층수 신기술 개발 경향을 분석하여 향후 우리나라 해양심층수 자원의 고부가가치 기술개발 방향과 전략에 대한 시사점과 비전을 제시하였다.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.75-83
• /
• 2015

The applicability of oil palm biomass, EFB(Empty Fruit Bunch) as raw materials for environmental friendly packaging material, pulp mold, was evaluated in this study. The changes in the water absorption properties of pulp mold by the addition of EFB and the surface treatments with PVA and AKD were analyzed by measuring the changes in the water absorption rate and the water contact angle. The each pulp mold sample was prepared by using laboratory wet pulp molder. And the water absorption rate of each samples were evaluated by measuring times for the absorption of a 0.1 ml water drop on the pulp mold sample surface. The addition of EFB to the pulp mold made of OCC resulted in the decrease of water absorption rate and the increase in the water contact angle. The surface treatments with PVA and AKD on the OCC pulp mold showed the significant reduction in the water absorption rate. However, in case of ONP pulp mold, the addition of EFB and the surface treatments with PVA and AKD showed no big changes in water absorption times. Those might be come from the finer surface structure of ONP pulp mold which were made of more finer and flexible fibers and more hydrophilic fibers. The results of this study showed the functional properties such as water absorption rate, could be controlled by the application of EFB and the treatments with AKD or PVA, especially in case of the OCC pulp mold.