• 한국추진공학회지
• /
• 제2권2호
• /
• pp.83-87
• /
• 1998

액체로켓엔진에서 발생하는 초음속 제트 소음을 감소시킬 수 있는 물 분사형 소음기를 설계, 제작하여 물의 질량 유동률, 1차관 길이, 그리고 2차 확장관의 지름과 같은 기하학적 변화에 따른 성능 시험을 수행하였으며, 다음과 같은 결과를 얻을 수 있었다. 1. 동일한 물의 질량 유동률에서, 1차관의 길이가 길수록 효과이었다. 2. 물이 질량 유동률이 증가하면, 소음은 감소한다. 3. 최적의 물 질량 유동률은 추진제 공급량의 10∼12배 정도이다. 4. 소음기에 2차 확장관을 부착할 경우, 약 30㏈ 정도 소음감소 효과를 얻을 수 있다.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.79-85
• /
• 2017

A heat pump system is a highly efficient, eco-friendly device which consumes a small amount of energy and supply a lot of energy for heat formation. In addition, it is a single device system that has low generation effect about carbon dioxide. There are many researches related to the electronic expansion valve and the heat pump, but the detailed data analysis of each influence is insufficient. In this study, the cooling capacity and COP of the heat pump system were investigated by varying frequency of the inverter connected to compressor, inlet temperature of chilled water into evaporator and inlet temperature of cooling water into condenser. The results are as follows : (1) The cooling capacity increased as the inverter frequency, inlet temperature of chilled water into evaporator increased, and inlet temperature of cooling water into condenser decreased. (2) The COP increased as the frequency of inverter, inlet temperature of cooling water into condenser decreased and the inlet temperature of chilled water into evaporator increased.

• 한국식품영양과학회지
• /
• 제32권8호
• /
• pp.1270-1277
• /
• 2003

두유박과 옥분 혼합물의 압출성형물을 제조하기 위한 공정 조건의 위하여 스크류 속도 150∼250 rpm, 혼합물의 수분함량 20∼30%, 온도 100∼15$0^{\circ}C$의 조건에서 압출 성형하고, 반응표면분석법 (RSM)을 이용하여 최적 조건을 분석하였다. 공정 조건에 따른 팽화율에서는 스크류 속도가 높고 수분함량이 낮을수록 팽화가 크게 일어났고, 수분함량이 많을수록 용적 밀도를 높이는 것으로 나타났다. 절단강도의 경우 수분 함량에 따라 감소하다 증가하는 추세를 보여주었고, WSI는 스크류 속도와 수분함량에 WAI는 수분함량과 온도에 많은 영향을 받았다. 색도에서는 b＊ 값을 제외하고는 유의적인 차이를 보이지 않았다. 각 조건별 실험결과를 반응표면분석을 한 결과 팽화율과 용적 밀도, WSI, b＊ 값은 linear모델로 결정되었고, 절단강도와 WAI는 quadratic 모델이 유의성을 나타내었다. 압출 성형 공정의 최적화는 결정된 반응식과 반응표면 그래프를 이용한 결과 수치 최적화에서는 스크류 속도 250 rpm, 수분함량 22.43%, 온도 128.16$^{\circ}C$이었고, 모형적 최적화에서는 desirability가 0.727인 스크류 속도 250 rpm, 수분함량 22.43%, 온도 128.02$^{\circ}C$로 결정되었다.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.153-167
• /
• 2022

This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

• 산업기술연구
• /
• 제24권A호
• /
• pp.165-171
• /
• 2004

Latex modification of concrete provides the material with higher flexural strength, as well as high bond strength and reduced water permeability. However, If the thermal expansion properties of overlay concrete (latex-modified concretes) are big different from that of substrate (ordinary portland cement concrete), these would cause a big interfacial stresses and result in premature failure. Therefore, the purposes of this study were to investigate thermal expansion characteristics of latex-modified concrete with cement types. The result of thermal expansion showed the coefficient of thermal expansion of concretes increased with latex inclusion. The coefficient of thermal expansion of RSLMC was a little smaller than that of LMC, which might be due to the finer cement grain, compacter internal, and stiffer properties of concrete. However, the coefficients of LMC and RSLMC were quite similar to that of ordinary cement concrete. Thus, this would not cause an interfacial stresses and will enable to ensure long-term performance of concrete bridge deck overlays.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.303-315
• /
• 2021

A rigorous and generic similarity solution is developed for assessment of the undrained expansion responses of a cylindrical cavity expansion in K₀-consolidated anisotropic soils. A K₀-consolidated anisotropic modified Cam-clay (K₀-AMCC) model that can represent the initial stress anisotropy and the effects of stress-induced anisotropy is used to model the soil behaviors during cavity expansion. All the seven basic unknowns, the three stress components, the pore water pressure, the particle velocity, the specific volume and the hardening parameter, are reduced to the functions of a dimensionless radial coordinate and are taken as coupled variables to formulate the problem. The governing equations are formulated by making use of the equilibrium equation, the constitutive equation, the consistency condition, the continuity condition and the undrained condition, which are then solved as an initial value problem. The proposed rigorous similarity solution is compared with some well-documented rigorous solutions to validate the solution and to highlight the special expansion responses in anisotropic soils. The results reveal that the present solution can yield more predictions for cavity expansion problems in soils with initial anisotropic stresses.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1005-1013
• /
• 2005

The use of river water as a heat source of a heat pump has the advantage in the performance compared to the use of atmospheric air because the temperature variation of river water over the year is relatively small. In this study, the performance of the heat pump system using river water as a heat source was numerically investigated. A simulation model for the 2-stage compression heat pump system was developed with each component model composed of compressors, heat exchangers, a flash tank and electronic expansion devices. The peformance of the heat pump system using river water was improved by $50\%$ compared to that using atmospheric air in winter conditions.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.51-62
• /
• 2013

The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.52-58
• /
• 2006

Coffee chaff for manufacturing of the 6 mm thick cement-bonded boards was obtained from a coffee processing industry at Omuo-Ekiti, in Ekiti State, Nigeria. Boards were produced with three levels of cement to coffee chaff ratio of 1.5:1, 2.5:1 and 3.5:1; and at three levels of mixing curing reagent of 2.0%, 2.5% and 3.0%. Three dimensional properties of thickness swelling (TS), water absorption (WA) and linear expansion (LE) were investigated after 48 hours immersion in water. The mean values obtained for TS, WA and LE ranged from 0.46% to 1.47%, from 11.52% to 24.00%, from 0.19% to 0.35%, respectively. The most dimensionally stable boards were produced at the highest mixing levels of curing reagent and cement to coffee chaff ratio of 3.0% and 3.5:1, respectively. The coffee chaff is suitable as raw material for the manufacture of cement-bonded composites and it would be able to stimulate and activate the use of other agro-byproducts for the manufacture of value-added panels.

• 한국수자원학회논문집
• /
• 제35권5호
• /
• pp.563-573
• /
• 2002

본 연구에서는 일정수심상에 사각형형상의 불투과성 수중방파제를 설치한 후 파랑의 반사를 수리실험을 통해 조사하였다. 입사파는 규칙파를 사용하였으며, 고유함수전개법을 이용하여 예측한 반사율을 본 연구에서 수행한 수리모형실험 결과와 비교하였다. 예측된 결과와 수리실험에서 관측한 결과는 비교적 잘 일치하였으며, 수리실험에 의한 반사율이 고유함수전개법에 의한 결과보다 다소 작았다.