• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1028-1032
• /
• 1995

The structure and electronic properties of the Si(100) surface is studied using the atom superposition and electron delocalization method. The energy released when the symmetric dimer surface is reconstructed to form the buckled dimer surface with p(2X2) symmetry is calculated to be 0.99 eV per dimer in the case of ideal clean surfaces. This indicates that the surface dimer buckling is intrinsic from the viewpoint of thermodynamics. The relaxation energy, when water is adsorbed on the clean symmetric dimer surface to form the buckled dimer surface, is 2.25 eV per dimer for appropriate coverages. These results show that H2O molecule could induce a reconstruction of the surface structure through adsorption. The buckling of the surface dimer is, therefore, more favorable under the existence of water vapour. This conclusion supports the recently obtained experimental observations by Chander et al.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.457-462
• /
• 2010

Adsorption of a water molecule on a Si (001) surface and its dissociation were studied using density functional theory to study the distribution of -OH fragments on the Si surface. The Si (001) surface was composed of Si dimers, which buckle in a zigzag pattern below the order-disorder transition temperature to reduce the surface energy. When a water molecule approached the Si surface, the O atom of the water molecule favored the down-buckled Si atom, and the H atom of the water molecule favored the up-buckled Si atom. This is explained by the attractions between the negatively charged O of the water and the positively charged down-buckled Si atom and between the positively charged H of the water and the negatively charged up-buckled Si atom. Following the adsorption of the first water molecule on the surface, a second water molecule adsorbed on either the inter-dimer or intra-dimer site of the Si dimer. The dipole-dipole interaction of the two adsorbed water molecules led to the formation of the water dimer, and the dissociation of the water molecules occurred easily below the order-disorder transition temperature. Therefore, the 1/2 monolayer of -OH on the water-terminated Si (001) surface shows a regular distribution. The results shed light on the atomic layer deposition process of alternate gate dielectric materials, such as $HfO_2$.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.135-141
• /
• 1999

A synthesis of Dimer acid was studied from a tall oil fatty acid. Catalytic activity measured as reactant conversion in a autoclave reactor increase in accordance with the acidity. The optimization of process conditions were tested by an experimental design method. Optimization synthetic conditions of dimer acid and were reaction of tall oil fatty acid during 2 hour at $250^{\circ}C$, used of 7.3 wt% active clay and $1.2{\sim}1.4wt%$ water, and found reation pressure $8{\sim}9Kg/cm^2$. The maximum conversion rate was researched $74{\sim}76%$.

• Journal of the Korean Chemical Society
• /
• v.60 no.6
• /
• pp.410-414
• /
• 2016

The anharmonic frequency of a local OH stretching mode of a water monomer and dimer was calculated using various levels of density functional theory. The quantum chemical potential energy curves as a function of the OH bond distance were calculated, and they were fitted with the Morse potential function to analytically obtain the fundamental transition frequency. By comparing those values with the frequencies similarly calculated using an ab initio quantum chemical method, the coupled cluster theory including both single and double excitations with the perturbative inclusion of triple excitation in the complete basis limit, the accuracy of various density functional methods in the calculation of anharmonic vibration frequency of water molecules was assessed. For a water monomer, X3LYP and B3LYP methods give the best accuracy, whereas for a water dimer, B972, LCBLYP, ${\omega}B97X$, ${\omega}B97$ methods show the best performance.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.993-999
• /
• 1998

Acid catalyzed hydrolysis of 1-phenoxyethyl propionate, Ⅰ, has been studied using the PM3 method in the gas phase. The first step of the reaction is the protonation of basic sites, three different oxygens in Ⅰ, producing three protonated species Ⅱ, Ⅲ and Ⅳ. All possible reaction pathways have been studied from each protonated structure. Changes in the reaction mechanisms have also been discussed from the results obtained by varying a nucleophile from a water monomer to a water dimer to a complex between one water molecule and an intermediate product (propionic acid or phenol) produced in the preceding unimolecular dissociation processes. Minimum energy reaction pathway is 2-W among the possible pathways, in which water dimer acts as an active catalyst and therefore facilitates the formation of a six-membered cyclic transition state. Lower barrier of 2-W is ascribed to an efficient bifunctional catalytic effect of water molecules. PM3-SM3.1 single point calculations have been done at the gas-phase optimized structure (SM3.1/PM3//PM3) to compare theoretical results to those of experimental work.

• Archives of Pharmacal Research
• /
• v.17 no.5
• /
• pp.381-382
• /
• 1994

Administration route dependency on the distribution of PEGylated recombinant human turor necrosis factor binding protein (rhTNFbp-PEG20K dimer) was observed following a subcutaneous (sc) and an intravenous (iv) administrationin rats. ehTNFbp-PEG20K dimer is composed of two rhTNGbp molecules (molecular weight 18, 278 daltons each) joined by polyethylene glycol 2000(PEG30K). The steady state distribution volume of rhTNFbp-PEG20K was 55 m/kg and 359 ml/kg following the i.v. and s.c. administrations, respectively. These results suggest that the distribution of ehTNFbp-PEG20K is limited within the cpillary space after i.v. administration, while rhTNFbp-PEG20K can distribute into a space (35.9% of body weight) which is between extracellylar space and total body water. A lymphatic absorption may paly a role in the distribution of rhTNFbp-PEF20K dimer following the sc administration. The present study suggests that the administration route of a lartge protein molecule should be determined depedning upon target sites.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.10
• /
• pp.929-934
• /
• 1996

The electrochemistry and the reaction of non-μ-oxo dimer-forming [5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinato] manganese(Ⅲ) chloride [(Cl8TPP)MnⅢCl] with tetraethylammonium hydroxide in water [-OH(H2O)] have been investigated by electrochemical and spectroscopic methods under anaerobic conditions. The stronger autoreduction of (C18TPP)MnⅢCl by -OH(H2O) in comparison with (Me12TPP)MnⅢCl by -OH(CH3OH) in MeCN is explained as the influence of electronic effects on substituted phenyl groups bonded to meso-position of porphyrin ring and the positive shift of reduction potential (-0.11 V) for (C18TPP)MnⅢCl. The autoreduction of manganese(Ⅲ) porphyrin to manganese (Ⅱ) by this process is only observed when one axial position is occupied by a ligating solvent and OH- coordinates the other axial site. The results are discussed in relation to the mechanisms for the reduction of manganese(Ⅲ) porphyrin.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.19-25
• /
• 2009

New polyelectrolytes derived from ionene-containing photocurable reactive oligomer (PIDM) were prepared for water-resistant humidity-sensitive membranes. The mixture of PIDM, hexamethylene dimethacrylate (HDM), pentaerythritol triacrylate dimer (SP1013), and photoinitiator was simultaneously coated on the sensor electrode with photoinitiated radical polymerization. The pretreatment of the substrates with vinyl-type silane-coupling reagent was performed for improving the water durability and stability of the sensors at high temperature and humidity. When the resistance dependences on the relative humidity of the crosslinked PIDMs were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was required for the humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, response time, water durability, and high temperature/humidity stabilities were measured and evaluated as a humidity-sensing membrane.

• Journal of the Korea Furniture Society
• /
• v.19 no.3
• /
• pp.172-179
• /
• 2008

The objective of this study was to investigate the influence of the water repellents' treatment on the water absorptivity and the dimensional stability of Korean red pine wood(Pinus densiflora). The alkylketene dimer(AKD), fluororesin emulsion(Wood-seal, WS), and paraffin wax emulsions(PW25, PW40, and PW1200) were used as water repellents. PW40 and WS were proved as excellent water repellents for pine wood, because the samples treated with these agents showed high contact angles and large reduction in water absorptivities. Also, the dimensional stability(antiswelling efficiency) of pine wood was considerably improved by water repellents treatments, such as PW40 and WS at the pressure of 2MPa. The water repellent treated woods with WS, PW40, and PW1200 at the pressure of 2MPa were relatively stable to the wet-dry cyclic leaching test.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.127-130
• /
• 2005

Intrinsic UV reflection and fluorescence behaviors of polycarbonate, polyurethane and poly(ethylene terephthalate) films were investigated in order to characterize the interaction of water in these films. During water sorption process, UV reflection spectra of polycarbonate and polyurethane films showed little peak position changes. Fluorescence emission spectra of polycarbonate films showed red spectral shifts from 332 nm with water immersion time. This red-shifted peak could be due to phenyl-2-phenoxybenzoate, which is one of the major thermal degradation products in polycarbonate. Fluorescence peaks of polyurethane films appeared at two different positions and the ratio of these peak intensities increased with increasing immersion time. In the case of PET films, the UV reflection spectrum showed the peak intensity around 340 nm to change in response to water sorption. The fluorescence near 388 nm probably due to ground state dimer exhibited sensitivity with water sorption, when excited at 340 nm.