• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.193-197
• /
• 2010

Water cooling ducts are installed in the exhaust diffuser for high altitude tests of rocket engine to protect diffuser from high-temperature combustion gas. The mass flow rate and pressure of cooling water is designed to prevent boiling of cooling water in the ducts. Therefore, the estimation of maximum temperature of duct wall is important parameter in design of cooling system, especially pressure of cooling water. The method for predicting maximum temperatures of duct walls with variation of coolant flow rates was derived theoretically.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.22-27
• /
• 2006

This paper describes the development of the stream-tube based dispersion model for modeling contaminant transport in open channels. The operator-splitting technique is employed to separate the 2D contaminant transport equation into the pure advection and pure dispersion equations. Then the total variation diminishing (TVD) schemes are combined with the second-order Lax-Wendroff and third-order QUICKEST explicit finite difference schemes respectively to solve the pure advection equation in order to prevent the occurrence of numerical oscillations. Due to various limiters owning different features, the numerical tests for 1D pure advection and 2D dispersion are conducted to evaluate the performance of different TVD schemes firstly, then the TVD schemes are applied to experimental data for simulating the 2D mixing in a straight trapezoidal channel to test the model capability. Both the numerical tests and model application show that the TVD schemes are very competent for solving the advection-dominated transport problems.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.178-185
• /
• 2009

Simple and highly efficient droplet merging method is proposed, which enables two nanoliter or picoliter droplets to merge regularly in a straight microchannel. Using a cross channel with inflows of one oil phase through the main channel and two water phases through the side channels, two droplets of different sizes can be generated alternatingly in accordance with flow rate difference of the water phases. It is shown that for a fixed oil phase flow rate, the flow rate of one water phase required for alternating droplet generation increases linearly with the flow rate of another water phase. By this method, the droplets are merged with 100 % efficiency without any additional driving forces.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.660-661
• /
• 2008

Nanotubes fabricated with diverse materials show different hydrophobic properties. The hydrophobic property is one of key properties for possible applications to ion channels due to their affinity. This study focuses on the structures of water molecules inside nanotubes with varying hydrophobicity using molecular dynamics simulation. Hydrophobicity here is determined by varying the attraction term in Lennard-Jones potential. The number of water molecules inside hydrophilic nanotubes increase, as expected, and their mobilities also increase. This trend is rather discrete with increasing number of water molecules and this discreteness is attributed to hydrogen bond. We plan to perform energy analysis to understand these structural results.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.780-783
• /
• 2008

This study developed a model that could calculate roughness using Manning's and Chezy coefficient for Yangjae-stream. The estimated roughness by model developed was used for roughness coefficient in the stream without water level-discharge data. Roughness coefficient was estimated using assumed and calculated water level about each discharge scale by unsteady flow analysis. As a result, error of water surface level by model was shown 1.29m, it was shown that the flow resistance tends to increase with the desity of vegetation.

• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.335-346
• /
• 2013

The Critical Heat Flux (CHF) of water with dispersed alumina nanoparticles was measured for the geometry and flow conditions relevant to the In-Vessel Retention (IVR) situation which can occur during core melting sequences in certain advanced Light Water Reactors (LWRs). CHF measurements were conducted in a flow boiling loop featuring a test section designed to be thermal-hydraulically similar to the vessel/insulation gap in the Westinghouse AP1000 plant. The effects of orientation angle, pressure, mass flux, fluid type, boiling time, surface material, and surface state were investigated. Results for water-based nanofluids with alumina nanoparticles (0.001% by volume) on stainless steel surface indicate an average 70% CHF enhancement with a range of 17% to 108% depending on the specific flow conditions expected for IVR. Experiments also indicate that only about thirty minutes of boiling time (which drives nanoparticle deposition) are needed to obtain substantial CHF enhancement with nanofluids.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.368-376
• /
• 2009

Studies on the effect of the wall-ion, wall-water, water-ion and ion-ion interaction on properties of water and ions in nano-channels have been performed through the use of different kinds of ions or different models of potential energy between wall-ion or wall-water. On this paper, we address the effect of water-wall interaction potential on the properties of confined aqueous solution by using the molecular dynamics (MD) simulations. As the interaction potential energies between water and wall we employed the models of the Weeks-Chandler-Andersen (WCA) and Lennard-Jones (LJ). On the MD simulations, 680 water molecules and 20 ions are included between uniformly charged plates that are separated by 2.6 nm. The water molecules are modeled by using the rigid SPC/E model (simple point charge/Extended) and the ions by the charged Lennard-Jones particle model. We compared the results obtained by using WCA potential with those by LJ potential. We also compared the results (e.g. ion density and electro-static potential distributions) in each of the above cases with those provided by solving the Poisson-Boltzmann equation.

• Journal of Environmental Science International
• /
• v.19 no.2
• /
• pp.149-155
• /
• 2010

Rainfalls would increase the discharges or stages of tributary channels in natural watersheds, which in turn augment the magnitude of main stream stages. Rising of water surface elevation in main streams can affect and damage the human activities because of the possibilities of the breakdown or overflow of the embankment. Therefore it is necessary to establish the structural or non-structural alternatives for the sake of prevention or treatment of those disasters. Many mathematical models to analyze the flood flows in natural watercourses have been proposed as the non-structural alternatives so far. In this study one of the such models, FLDWAV developed by NWS(National weather Service), is applied to the downstream reach of Nakdong river. Model calibration is performed on various Manning's roughness coefficients at the gauging stations. The simulation results are compared well with hydrological estimations of flood discharges considering the effects of multipurpose dams upstream of control points.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.858-864
• /
• 2018

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.657-666
• /
• 2010

The adjustment processes of mining pits in the disturbed channels by sand or gravel mining were investigated by laboratory experiments in this study. The pit migrated with speed when the river bed was steep. The pit migrated slow and steady when the pit was filling with sand, but the pit migrated with speed after the filling processes was finished. The submerged angle of repose in the pit was nearly constant during the pit was filling. The pit was filled with sand with speed as the channel slope was increased. It took time for the pit to be filled with sand as the pit dimension was increased. This meant that the disturbed channels by sand or gravel mining to adjust the new environment was dependent on the slope of the channels and the dimension of the pits. The dimensionless pit length was short and the dimensionless pit depth was shallow as the time was increased. The dimensionless pit depth was shallow, but the dimensionless pit migration speed was increased as the dimensionless shear velocity and the migration speed of the pit were increased. The dimensionless pit depth was increased with the dimensionless bar migration speed. The shape of the pit was deformed and migrated downstream in accordance with the location and shape of the biased bar front which was developed upstream.