• 제목/요약/키워드: Water Spray

검색결과 962건 처리시간 0.028초

노즐 특성 변화에 따른 미분무수와 화염과의 상호작용에 관한 수치해석 (Numerical Analysis on Interaction between Fire Flame and Water Mist according to the Variation of Nozzle Performance)

  • 배강열;정희택;김형범
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2983-2988
    • /
    • 2007
  • In the present study, the numerical investigation on the effects of water-mist characteristics has been carried out for the fire suppression mechanism. The FDS are used to simulate the interaction of fire plume and water mists, and program describes the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The numerical model is consisted of a rectangular enclosure of $L{\times}W{\times}H=1.5{\times}1.5{\times}2.0m$ and a water mist nozzle that be installed 1.8m from fire pool. In the study, the parameters of nozzle for simulation are the droplet size and the spray velocity. Finally, the droplet size influences to fire flume on fire suppression than spray velocity because of the effect of terminal velocity, and the optimal condition for fire suppression is that the droplet size and the spray velocity are $100{\mu}m$ and 20m/s, respectively.

  • PDF

물 분무 액적 특성이 화재진압에 미치는 영향에 대한 수치해석 (Numerical Analysis of the Effects of Droplets Characteristics of Water Spray on Fire Suppression)

  • 이재호
    • 한국화재소방학회논문지
    • /
    • 제33권6호
    • /
    • pp.1-8
    • /
    • 2019
  • 본 연구에서는 물 분무 액적 특성 변화가 화재 진압에 미치는 영향을 FDS 6.5.2를 이용하여 수치적으로 분석하였다. 물 분무 노즐의 소화계수, 액적 분포함수, 중간체적 직경 및 초당 액적 수 변화에 대한 화재진압 특성은 정규 열방출률 곡선의 감소율와 냉각시간의 측면에서 평가되었다. 소화계수가 증가하면 정규열방출률 곡선이 더 급격하게 감소하고, 중간체적입경 변화가 화재진압에 영향을 미치는 것을 확인하였다. 단일 액적분포에서 초당액적수의 증가에 따라 정규 열방출률 곡선은 더 완만하게 감소하였으며, 다중분포에서는 초당액적수가 작은 조건에서만 정규 열방출률 곡선이 급격하게 감소하는 것을 확인하였다.

요소수 인젝터의 작동 변수에 따른 분무미립화 성능에 관한 연구 (Study on Spray Atomization Characteristics Depending on the Operating Parameters of Urea Injector)

  • 김동환;박준규;박성욱
    • 한국분무공학회지
    • /
    • 제24권1호
    • /
    • pp.1-7
    • /
    • 2019
  • This study was carried out to analyze the spray characteristics as a function of the operating parameters of urea injector used in Urea-SCR system of passenger diesel vehicle. Spray visualization and PDPA experiment were performed to analyze the macroscopic spray development and atomization performance of urea-water-solution. For the urea injector, the deformation of the spray head does not appear to be significant because it operates at a low pressure conditions, and the liquid core and primary droplet are observed throughout the operating conditions. No increase in atomization is seen when the operating pressure is increased, and the spray develops linearly due to poor atomization characteristics. The macroscopic spray behavior of the low-pressure urea injector is predictable through the modification of the Hiroyasu equation.

물과 나노유체의 분무 특성 비교 (Comparison of the Characteristics of Sprays between Water and Nanofluid Sprays)

  • 강보선;이신표
    • 한국분무공학회지
    • /
    • 제19권2호
    • /
    • pp.82-87
    • /
    • 2014
  • Nanofluids are that metallic or nonmetallic nanometer-sized particles are dispersed in liquid. They can be used in various fields to increase the heat transfer rate because the thermal conductivity of nanofluids can be increased significantly. Nanofluids may be used as a good alternative of coolants in spray cooling. This study conducted experiments to compare the characteristics of sprays between water and nanofluid sprays. The radial distributions of droplet velocities and diameters of water, 0.2% wt.(weight), and 0.5% wt. $Al_2O_3$ nanofluids at the pressure of 0.2 and 0.3 MPa were measured by laser doppler instruments. The radial distributions of droplet diameters and velocities at two axial positions with water and 0.2% wt. nanofluid sprays didn't show much difference. A big difference, however, was observed between 0.5% wt. nanofluid and water sprays. With the increase of the mass of nano-particles, the average droplet diameters were increased and the average droplet velocities were decreased.

분사압력 및 분사각에 따른 비충돌형 인젝터의 분무특성 (Spray Characteristics of Nonimpinging-type Injector According to the Injection Pressure Variation and Angular Direction of Orifices)

  • 정훈;김종현;김정수
    • 한국추진공학회지
    • /
    • 제16권3호
    • /
    • pp.1-8
    • /
    • 2012
  • 70 N급 액체로켓엔진에 장착되는 비충돌형 인젝터의 수류시험을 수행하였다. 추진제 분사각이 커짐에 따라 인젝터 분무의 분열 양상이 평활류(smooth jet)에서 파상류(wavy jet) 형태로 천이하고, 분무의 분열길이는 분사압력에 반비례한다. 고속카메라로 획득한 순간분무이미지(instantaneous spray image) 분석을 통하여 액주 표면에 나타나는 파상(ruffle)이 확인되었으며, 특정 분사압력 구간(0.93 MPa)에서 분무의 주기적 흘림현상이 증폭되는 이상현상이 발견되었다.

Investigation of Efficacy of Lidocaine Spray for Sedated Esophagogastroduodenoscopy in Children

  • Basturk, Ahmet;Artan, Reha;Yilmaz, Aygen
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제20권2호
    • /
    • pp.87-93
    • /
    • 2017
  • Purpose: Our aim in this study is to investigate efficacy of topical lidocaine spray for sedated esophagogastroduodenoscopy (EGD) in children. Methods: The endoscopy of children aged between 3-18 years who underwent EGD in our endoscopy unit. Intravenous (IV) midazolam and ketamine were used for sedation. Prior to sedation, endoscopy nurse applied topical lidocaine 10% with pump spray at 1 mg/kg dose in group 1, and distilled water via identically scaled pump spray in group 2, in a double blinded fashion. Results: Sedation was not applied in 24.1% of the cases in topical lidocaine spray group (LS group) and in 5.7% of the cases in distilled water spray group (DS group). Gag reflex was observed in 6.5% of cases in LS group and 33.3% of cases in DS group (p=0.024), increased oral secretion was observed in 9.3% of cases in LS group and 51.7% of cases in DS group (p=0.038), sore throat was observed in 3.7% of cases in LS group and 35.6% of cases in DS group (p=0.019) and the difference was statistically significant. Conclusion: The study showed that topical pharyngeal lidocaine reduces both requirement and amount of IV sedation before EGD in children and sore throat, gag reflex and decreased oral secretion increase.

리그노셀룰로오스 나노피브릴의 분무건조 및 건조물의 특성 (Spray Drying of Lignocellulose Nanofibril (LCNF) and Characterization of Spray-dried LCNF)

  • 박찬우;한송이;이승환
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권3호
    • /
    • pp.288-296
    • /
    • 2017
  • 본 연구에서는 분무건조 조건 및 계면활성제 첨가에 따른 리그노셀룰로오스 나노피브릴(lignocellulose nanofibril, LCNF)의 분무건조 수율 및 건조 LCNF의 형태학적 특성, 치수분포 및 수재분산성을 조사하였다. 원료로는 약 70-300 nm 직경을 지니는 섬유상의 LCNF를 사용하였으며, 분무건조 LCNF는 rod형 파티클의 형태학적 특성을 보였다. $140^{\circ}C$ 온도조건에서의 분무건조 수율이 가장 높았으며, 분무건조 LCNF의 입자크기 또한 가장 작았다. LCNF 현탁액의 농도가 감소할수록 또한 송풍량이 증가할수록 분무건조 수율 및 입자크기가 증가하였다. 또한, 계면활성제의 첨가로 건조 수율을 향상시킬 수 있었으며, 첨가 비율이 증가할수록 평균입자크기가 감소하였다. 건조 LCNF의 입자 크기가 감소할수록, 물에서의 재분산성이 향상되었으며, 수현탁액의 여수시간이 증가하였다.

국내 원자력발전소의 LOCA사고에 따른 pH 분석 (Analysis of Post-LOCA pH for Korea Nuclear Units)

  • Hyung Won Lee;Yung Hee Kang;Jae Hee Kim
    • Nuclear Engineering and Technology
    • /
    • 제15권3호
    • /
    • pp.179-187
    • /
    • 1983
  • 국내원자력 발전소중 고리 1호기 및 5,6호기의 LOCA 사고시 격납용기 살수용액과 썸프 용액의 pH값이 US NRC에서 요구하는 설계기준치를 만족하는가를 알아보기 위해 전산프로그램 “LOCAPH”를 개발하여 최대 pH경우와 최소 pH경우로 나누어 분석하였다. 고리 5,6호기의 경우, 썸프 용액의 pH는 설계기준(최소 8.5이상)을 잘 만족하고 있으며, 살수 용액의 pH는 설계기준(8.5에서 11.0사이)을 약간 벗어나고 있음을 볼 수 있었다. 그러나 고리 1호기의 경우를 보면 썸프 용액의 pH는 역시 설계기준을 잘 만족하고 있으나 살수 용액의 pH는 최대 pH 경우에 있어서 현재 설계에 반영되고 있는 설계기준을 상당히 벗어나고 있음을 알 수 있었다.(고리 1호기 설계시 살수 용액의 pH에 대한 설계 기준치는 없었음) 설계 기준을 만족시키기 위해 고리 1호기의 설계변수를 바꾸어가며 계산해 본 결과 격납용기 살수 용액의 공급원인 핵연료 재장전수 저장탱크(RWST)의 붕소 농도를 2750ppm에서 2850ppm 사이로 유지하거나, 격납용기 살수 용액에 첨가되는 NaOH의 유량을 10gpm에서 24gpm사이로 유지해야 함을 알 수 있었다.

  • PDF

스프링클러 헤드의 방향성 살수 특성 비교 연구 (Directional Water Spray Characteristics of Sprinkler Heads)

  • 박용환
    • 한국화재소방학회논문지
    • /
    • 제18권4호
    • /
    • pp.35-41
    • /
    • 2004
  • 스프링클러 헤드의 살수 특성은 화재의 초기 진화 성능을 결정짓는 매우 중요한 요소이며, 이는 헤드노즐의 형상에 크게 좌우된다. 본 연구에서는 국내 시장점유율이 가장 높은 4개 제조사의 헤드 제품군에 대하여 방수계수 값과 방향성 살수 분포 특성을 규명하였다. 방수계수는 모두 기준 값을 상회하였지만, 헤드 종류별로 동일한 설계 값을 가짐에도 불구하고 큰 차이를 보이는 것으로 나타나 제품 간 품질차이가 큰 것으로 나타났다. 다만, 방수계수는 압력변화에 관계없이 비교적 일정하게 나타났다. 방향별 살수 분포 특성은 일부 헤드 샘플의 경우 매우 심각한 편향 분포를 나타냄으로써 성능개선 연구가 시급한 것으로 판단되었다

축대칭 이류체 분무화염의 구조에 관한 연구 (A Study on the Structure of Axial-Symmetric Two-Phase Spray and Flame)

  • 정보윤;고대권;안수길
    • 수산해양기술연구
    • /
    • 제24권1호
    • /
    • pp.36-43
    • /
    • 1988
  • Boilers and diesel engines have many problems because their exhaust particles, i.e., soot have lots of bad influence on environment. And it's spray and flame have fundamentally axial symmetric shape. To investigate the relationship between fuel concentration distribution of spray and soot concentration distribution as well as temperature distribution of flame, we made a axial symmetric two phase spray-flame and analyzed the structure of is. The measuring method is the principle of the light extinction method for the spray-flame and onion peeling model is applied to analyze the radial distribution of fuel and soot concentration. The temperature of flame is measured by ø 0.4mm Pt-Pt.RH 3% thermocouple. The oils for the experiments are diesel oil and 10% water emulsified diesel oil. It was found that the soot concentration becomes higher as it comes near to the center of flame, and the fuel concentration does, too. And the soot concentration level of diesel oil is generally higher than that of the 10% water emulsified fuel. The maximum flame temperature of diesel oil is 1,17$0^{\circ}C$, however, 10% water emulsified diesel oil is 1,27$0^{\circ}C$.

  • PDF