• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.41-44
• /
• 2006

This study introduced waste water treatment method by superconducting HGMS(High Gradient Magnetic Separation). HGMS treatment method is high efficient method for various waste water, we have surveyed superconducting magnetic separation technology. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel mesh, which is a core component in the magnetic separation system. In our basic preliminary experiment using HGMS, it was made clear that the fine para-magnetic particles in the wasted water obtained from steelmaking process of POSCO can be separated with high efficiency.

• 상하수도학회지
• /
• 제22권5호
• /
• pp.531-540
• /
• 2008

The main advantage of dissolved air flotation (DAF) in water treatment process is the small dimension compared with conventional gravity sedimentation and it can be basically reduced by the separation zone performed with the short solid-liquid separation time. Fine bubbles make such a short time possible to carry out solid from liquid separation as a collector on the course of water treatment. Therefore, the dimension of separation zone in DAF process is practically determined by the rise velocity of the bubble-floc agglomerates, which is a floc attached with several bubbles. To improve flotation velocity and particle removal efficiency in DAF process, many researchers have tried to attach bubbles as much as possible to flocs. Therefore, the maximum number of attached bubble on a floc and the rise velocity of bubble-floc agglomerates considered as the most important factor to design the separation zone of flotation tank in DAF process was simulated based on the population balance theory. According to the simulation results of this study, the size and volume concentration of bubble influenced on the possible number of attached bubble on a floc. The agglomerates attached with smaller bubble was more sensitive to hydraulic loading rate in the separation zone of DAF process. For the design of a high rate DAF process applied over surface loading 40 m/hr. it is required a precise further study on the variation of bubble property and behavior including in terms of bubble size distribution.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.461-469
• /
• 2004

This research is to determine the stormwater effects on sewer concentrations by measuring and comparing the flow and pollutant concentrations during dry and rainy periods in the existing BOX type combined sewer pipes. The monitoring was carried out in two sites, which are the Daesachen outfall having PE separation wall in BOX type combined sewer pipes and the Yongunchen outfall not having seperatioin wall. The average flow-weighted BOD concentraion in Yongunchen outfall is 2-fold lower than in Daesachen outfall because of the dilution effect from ravine water. However, the pollutant mass loading is 16 fold higher in Yongunchen outfall than in Daesachen outfall because of more flows. According to the research, the separation wall controls 52% pollutant mass during a storm period (11.5 mm/hr rainfall intensity). Therefore, the Yongunchen combined sewer system (CSS) need separation wall to control and to prevent more pollutant input in stream. In Daesachen area, the maximum sewer flow rate during a storm period measured about 10 fold bigger than average sewer flow during dry periods. Also the concentrations between rainy and dry periods increase approximately 33 fold for BOD and 120 fold for SS. In Yongunchen area, it increases about 9 fold for the maximum flow rate, 18 fold for BOD and 22 fold for SS during a storm. Therefore, the research is concluded that the separation wall between stromwater (or ravine water) and sewage can decrease the dilution effect in CSS and control the pollutant loading.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.47-53
• /
• 2018

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with $0.2{\mu}m$ pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

• Korean Membrane Journal
• /
• 제8권1호
• /
• pp.31-35
• /
• 2006

Pervaporation of water/2,2,2-trifluoroethanol (TFEA) mixtures was performed using a NaY zeolite membrane which was prepared by a hydrothermal synthesis. Pervaporation with a zeolite membrane is one of the economic separation technologies for liquid mixtures including organic/water solutions. The effects of a TFEA feed concentration and a temperature were studied on the permeation flux and the separation factor. Not only the water flux increased significantly with the increase of the operating temperature, but also the TFEA flux through the NaY zeolite membrane rapidly increased with the increase of the temperature at the feed concentration below 0.8 mole fraction of TFEA.

• 멤브레인
• /
• 제6권4호
• /
• pp.250-257
• /
• 1996

글루탈알데히드와 황산을 이용하여 가교된 키토산 복합막을 제조하였다. 제조된 복합막은 글루탈알데히드와 황산용액을 이용하여 표면말을 선택적으로 가교하엿다. 제조된 키토산 막에서의 키토산과 아세트산간의 착체형성의 영향을 관찰하기 위하여 수산화나트륨으로 중화하여 성능을 비교하였다. 황산으로 표면을 가교한 경우 코팅된 활성층의 투과증발에 대한 영향을 관찰하였다. 글루탈알데히드로 가교된 키토산복합막은 지지체의 종류를 변화시키면서 투과증발성능을 비교하였다. 지지체의 순수투과성능이 증가할수록 투과유량은 비슷한 값들을 유지하였으며, 선택도는 증가하다가 다시 감소하는 경향을 나타내었다. 수산화나트륨으로 키토산을 중화시킨 경우에는 선택도는 감소하였고 투과유량은 유지되는 경향을 나타내었다. 황산을 이용하여 표면을 이온가교시킨 경우 키토산 복합막은 활성충우ㅏ 두께가 증가할수록 가교시간이 증가하여야 최적의 가교조건을 나타내었다.

• 방사선산업학회지
• /
• 제9권2호
• /
• pp.77-84
• /
• 2015

The stainless steel mesh coated with poly(acrylic acid) hydrogel was fabricated and applied for the separation of water and oil. The stainless steel mesh was immersed in aqueous poly (acrylic acid) solution, and then irradiated by radiation to introduce poly(acrylic acid) hydrogel on the surface of mesh by crosslinking. It was possible to separate oil and water from mixtures of oil/water effectively using the hydrogel-coated mesh. The effect of irradiation dose, coating thickness, size of mesh on the separation efficiency was examined.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.22-25
• /
• 2019

The superconducting magnetic separation system has been developing to separate the iron oxide scale from the feed water of the thermal power plant. The accumulation in the boiler lowers the heat exchange rate or in the worst case damages it. For this reason, in order to prevent scale generation, controlling pH and redox potential is employed. However, these methods are not sufficient and then the chemical cleaning is performed regularly. A superconducting magnetic separation system is investigated for removing iron oxide scale in a feed water system. Water supply conditions of the thermal power plant are as follows, flow rate 400 t / h, flow speed 0.2 m / s, pressure 2 MPa, temperature $160-200^{\circ}C$, amount of scale generation 50 - 120 t / 2 years. The main iron oxide scale is magnetite (ferromagnetic substance) and its particle size is several tens ${\mu}m$. As the first step we are considering to introduce the system to the chemical cleaning process of the thermal power plant instead of the thermal power plant itself. The current status of development will be reported.

• 멤브레인
• /
• 제1권1호
• /
• pp.34-43
• /
• 1991

물에 대해 수착선택성이 높은 아세트산 셀룰로오스 치밀막(CA막)과 에탄올에 대해 수착선택성이 높은 실리콘 고무막(SR막)을 통한 물(1)/에탄올(2) 이성분 혼합액의 투과증발에 있어서 막의 친화성과 최적 조업조건의 관계를 조사하였다. CA막과 SR막을 제조하여, 이들 막에서의 수착량, 수착선택도, 투과증발 분리도 및 투과증발 속도를 실험으로 구하고 서로 비교하였다. 하류압력의 영향을 Thompson다이아그램을 써서 분석하였고, 공급액 농도와 조업 온도 변화에 따른 수착 및 투과증발 특성을 활동도 계수, 가소화 효과, 활성화에너지 등으로 설명할 수 있었다. CA막을 사용한 물의 분리의 경우에는 물에 대한 투과증발 분리도 ($[\alpha^2_1]_{PV}$) 및 투과증발 속도 모두 하류압력이 낮고, 공급액의 농도가 중간 정도이고, 온도가 높은 조업조건이 유리하였다. 그러나 SR막을 사용한 에탄올의 분리의 경우에는 에탄올에 대한 투과증발 분리도 ($[\alpha^2_1]_{PV}$) 는 하류압력이 높을수록, 공급액 중의 에탄올 농도가 낮을수록, 조업온도가 낮을수록 증가하였지만, 투과증발 속도는 반대의 경향을 나타내었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.446-448
• /
• 2000

In this study, we investigated the theoretical and experimental study for separation of solid-liquid suspensions of water and fine particles using acoustic standing wave. When the acoutic force was not applied, the separation efficiency was decreased as flow rate was increased. When it was applied, the separation efficiency was maintained over 95%.