• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.96-104
• /
• 2020

The numerical simulations were conducted to investigate the thermal-fluid phenomena occurred inside the experimental apparatus during a PCCS, used to remove heat released in accidents from a containment of light water nuclear power plant, operation. Numerical simulations of the flow and heat transfer caused by wall condensation inside the containment simulation vessel (CSV), which equipped with 18 vertical heat exchanger tubes, were conducted using the commercial computational fluid dynamics (CFD) software ANSYS-CFX. Shear stress transport (SST) and the wall condensation model were used for turbulence closure and wall condensation, respectively. The simulation using the actual size of the apparatus. However, rather than simulating the whole experimental apparatus in consideration of the experimental cases, calculation resources, and calculation time, the simulation model was prepared only in CSV. Selective simulation was conducted to verify the effects of non-condensable gas(NC gas) concentration, CSV internal pressure, and wall sub-cooling conditions. First, as a result of the internal flow of CSV, it was observed that downward flow due to condensation occurred surface of the vertical tube and upward flow occurred in the distant place. Natural convection occurred actively around the heat exchanger tube. Due to this rising and falling internal flow, natural circulation occurred actively around the heat exchanger tubes. Next, in order to check the performance of built-in condensation model using according to the non-condensable gas concentration, CSV internal flow and wall sub-cooling, the heat flux values were compared with the experimental results. On average, the results were underestimated with and error of about 25%. In addition, the influence of CSV internal pressure and wall sub-cooling was small, but when the condensate was highly generated due to the low non-condensable gas concentration, the error was large compared to the experimental values. This is considered to be due to the nature of the condensation model of the CFX code. However, in spite of the limitations of CFD, it is valid to use the built-in condensation model of CFD for PCCS performance prediction from a conservative perspective.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.531-540
• /
• 2003

Because of the rapid increase of energy consumption, we have some problems such as environmental pollution, global warming, the oil shocks, and so on. To solve these problems, concern about renewable energy such as solar energy, wind force, and water energy is continuously increasing. America, Europe, and Japan have developed a system that manage and utilize the information of the renewable energy resources. However, in the domestic, renewable energy information system was not effectively built yet. Therefore, in this paper, we propose a renewable energy information system, which store and manage solar radiation energy data. We implemented the system using ArcView GIS. Also the system is able to retrieve the information from the energy database through various spatiotemporal queries. In addition, user can identify the results of summary data in the form of chart, graph, and counter line. The implemented system is supplied to the user through the web by ArcIMS.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.54-63
• /
• 2015

This study aims to suggest the place branding methods applicable for regenerated idle industrial facilities. The place branding methods were analyzed by separating into hard branding methods and soft branding methods, and the results of the study are as follows: As for the hard branding methods, the exterior, outer wall materials and interior materials of the building and industrial equipment are preserved to revive the historicity of the building. In order to organize a differentiated space, it is important to create the convenience space such as cafes, experience space, lounge, and restaurants as well as the space for the operation of the programs. The building itself is utilized as a landmark or the iconic facility such as the winding tower or chimney is utilized as a landmark. As the methods of introducing natural elements, there is a need to create the resting space, law area and water space where trees can be planted and landscape can be viewed, and the development of tourism products utilizing the peripheral resources and the link of programs are also important. As for the soft branding methods, the provision of programs where a variety of art genres and the sense of place are reflected and the programs linked to the region is needed, and the story of place can be shared by storytelling utilizing the work and programs reflecting the sense of place. In addition, the content development and physical improvement of facilities reflecting the needs of visitors and the establishment of the organic collaboration system of a variety of subjects are needed for the sustainability of place.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.268-273
• /
• 2015

Recently many countries are researching actively underwater sensor networks for securing ocean resources and changes of ocean environment in all over the world. Current the commercial modem are not suitable because it has characteristics of long distance, higher price, larger power consumption with the special object mainly. In this paper, a low power and compact underwater communication modem which is suitable for underwater sensor networks is implemented. It is comprised by using a simple analog circuit for non-coherent BFSK modulation method, ultra low power MCU and orthogonal codes with a less operation and a simple implementation. It was experimented an underwater communication using our modem in a water tank and open sea farms. It communicates fewer than $10^{-4}$ bit error rate.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.4
• /
• pp.31-49
• /
• 1989

It is of the most urgent necessity to get hydrological time series of long duration for the establishment of rational design and operation criterion for the Agricultural hydraulic structures. This study was conducted to select best fitted frequency distribution for the monthly runoff and to simulate long series of generated flows by multi-season first order Markov model with comparison of statistical parameters which are derivated from observed and sy- nthetic flows in the five watersheds along Geum river basin. The results summarized through this study are as follows. 1. Both two parameter gamma and two parameter lognormal distribution were judged to be as good fitted distributions for monthly discharge by Kolmogorov-Smirnov method for goodness of fit test in all watersheds. 2. Statistical parameters were obtained from synthetic flows simulated by two parameter gamma distribution were closer to the results from observed flows than those of two para- meter lognormal distribution in all watersheds. 3. In general, fluctuation for the coefficient of variation based on two parameter gamma distribution was shown as more good agreement with the observed flow than that of two parameter lognormal distribution. Especially, coefficient of variation based on two parameter lognormal distribution was quite closer to that of observed flow during June and August in all years. 4. Monthly synthetic flows based on two parameter gamma distribution are considered to give more reasonably good results than those of two parameter lognormal distribution in the multi-season first order Markov model in all watersheds. 5. Synthetic monthly flows with 100 years for eack watershed were sjmulated by multi- season first order Markov model based on two parameter gamma distribution which is ack- nowledged to fit the actual distribution of monthly discharges of watersheds. Simulated sy- nthetic monthly flows may be considered to be contributed to the long series of discharges as an input data for the development of water resources. 6. It is to be desired that generation technique of synthetic flow in this study would be compared with other simulation techniques for the objective time series.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.146-157
• /
• 2019

This study, as a pilot study to implement and extend the marine healing which has been rapidly extending oversea areas into the domestic market, has collected seven major marine healing resources such as ocean water, sand, salt, mud, seaweeds, forest, and weather targeting selected four pilot municipalities and established a GIS DB. Furthermore, web GIS based marine healing portal has been established to support the easier utilization of the GIS DB and various marine healing related contents, thereby facilitating expansion of related industry. The portal includes marine thematic maps as well as research papers, related therapy manuals, and various activities and programs of the pilot municipalities. It is expected that the portal would contribute to the expansion of the domestic marine healing industry significantly through the pilot operation of the portal, not to mention of the needs of subsequent studies for expansion of the marine GIS DB and securing more various contents.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.352-362
• /
• 1991

Recent popular trends in pressurized water reactor(PWR) fuel management are to extend the cycle length and to employ the low-leakage core designs for the optimal utilization of the uranium resources. In control strategy incorporated with the fuel management, turnable absorbers are required to control the power peaking and to ensure a negative moderator temperature coefficient during reactor operation. In this study, the nuclear characteristics and the optimal allocation of gadolinium-poisoned rods within the fuel assembly are considered using KWU SAV 79 A Code Package. First, analyses are carried out to compare the nuclear characteristics of the fuel assemblies contain-ing WABA(Wet Annular Burnable Absorber) and Gadolinium burnable absorbers respectively. The analyses show that the gadolinium-bearing fuel assembly has peculiar depletion characteristics ensuing from the very large thermal neutron absorption cross section. Peculiar characteristics of gadolinium provide basis for the optimal allocation of Gd rods in fuel assembly. Second, the methodology of an optimal allocation of gadolinium-poisoned rods within the fuel assembly is developed and applied to some nuclear designs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.2
• /
• pp.21-39
• /
• 1992

Many problems were found out the remarkable unbalance between paddy fields and up-land areas, or between plain and mountainous areas, unreasonable establishing of land consolidaton boundaries without consideration of rural development, lower leverl of construction technology of the roads and canals for agricultral use ad operation and maintenance of them by human power far apart from the ages of high technology, high information and free internationalisation, and too slow progress to overcome the weak agricultural circumstances etc. through the survey in the past executed land consolidation projects. The basic ways for solution of these problems for propulsion of land consolidation project through investigation are summarized as follows : 1. Land consolidation project should be executed to the direction of balanced regional development, laying stress on the upland and mountainous areas in order to carry out the agriculture effectively. 2. the acreage of land consolidation project to be conducted anually should be increased to overcome the serious underdeveloped agricultural development. 3. It should be developed to the way in accordance with the order of land use from the view point of rural integral development including the rural readjustment. 4. The level of the structures of road and canal, the size of standard lot and the grouping of land substitution should be to incraese the productivity of land and labour more than ever and reached to a degree in cope with the age of industrialization, information and free internationalisation. 5. The level of the management of agricultural water use and the maintenace of the various facilities should be developed to be automatization, remote control, central control and information processing instead human work. 6. Land substitution should take a measure of grouping method in accordance with the agricultural plan and farming organization, which can overcome high industrialized society in place of the substition by origin land. 7. Land consolidation project should be planned in order to fulfil a conservative function of ecosystem and resources together with improvement of land and labour productivity.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.185-196
• /
• 2010

Korea is presently the leading country in global desalination industry and has been investing a large amount of money and human resources in development of new core technologies to increase its' share of global market. In this paper, we reviewed world-wide trends of the advanced water industry and outlined various seawater desalination technologies developed so far. We also made some analysis on the directions and results of the government-lead R&D sponsorship in the field of seawater-freshening technology. Present studies showed that we need an institutional strategy to help domestic companies guarantee the credibility of the technologies developed by themselves based upon their experience of plant operation. Futhermore, strategic R&D programs to develope original technologies and localization of key components for desalination plants should be preceded in the near future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.65-70
• /
• 2005

This study was conducted to investigate the effect of combine crawler attaching slurry spreader on soil and growth of rye. The performance test at actual field was conducted to test for possibility of practical use. Field test of the slurry spreader was operated in upland and paddy field. Experiments was conducted to compare the effects of the soil damage and crop productivity incorporating Pig slurry by two different types of slurry spreader. In this experiment a slurry spreader using crawler of combine have been designed and developed to enhance the operation in small field and reduce e damage of soil structure. but it was not suitable for transference in long distance. Conventional tractor mounted vacuum is not suitable for $71.6\%$ water condition in the small areas of paddy land. But the slurry spreader using crawler could be controlled the working point and moving by crawler in paddy land of small area. The wheels depths of soil in the supplementary application in the rye field was 4.9 m in tractor mounted spreader. but the wheels depth of crawler attaching spreader was 1.6cm. The dry matter yield of rye was reduced by $12\%$ in supplementary application of slurry due to mechanical damage from passage of the tires. This is particularly noticeable at high soil moisture condition in paddy land. It was concluded that the slurry spreader developed in this study could be successfully used for basal and supplementary application of slurry in rye paddy field.