• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.207-212
• /
• 2006

The development of practical utilization way of water repelling technology for manufacturing of fruiting bag was main purpose of this study. The water repelling technology was developed by wax emulsion coating The wax emulsion was manufactured at Chungsan chemical(Co) on pilot scale. The coating paper was tried in plant coater of Agro(Co). The water repellency of wax emulsion coated paper was good as fruit bagging paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.76-77
• /
• 2021

compared and reviewed the water repellency and strength characteristics by controlling the surface stamping size and fine aggregate ratio of cement mortar mixed with water repellent as a method to control the ecological imitation surface structure. As a result of measuring the contact angle, the higher the ratio of fine aggregate, the larger the contact angle. The contact angle increased when the surface structure was changed by stamping, and increased as the stamping size became smaller. In the surface stamping of mesh#150, the contact angle was particularly increased.

• 한국응용과학기술학회지
• /
• 제8권1호
• /
• pp.9-20
• /
• 1991

In the preparation of acrylic water repellent(EDLWC). quaternized 2-diethylarrunoethylmethacrylate-stearylmethacrylate copolymer (DSACC) and quaternized 1-Iaurovlbis(aminoethyl)-2-dodecylimidazoline(LDDIC) were selected as a basic resin and the improving agent such as softening effect and hydrostatic pressure of the water repellent. EDLWC was prepared by blending waxes and emulsifier for waxes with various ratio to DSACC and LDDIC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyester-cotton(P/C) blended fabrics treated with EDLWC only or addition of textile finishing resin, the physical properties were increased. Sodium acetate was the most effective catalyst in the water repellency among the various kinds of catalyst. and the reasonable concentration of the catalyst was 1. 4 wt%. EDLWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing. The reaction mechanism between P/C blended fabrics and EDLWC in the presence of catalyst was proposed. And also, the longitudinal view of the P/C blended fabrics treated with water repellent was observed with scanning electron microscope.

• 공업화학
• /
• 제3권4호
• /
• pp.639-648
• /
• 1992

시멘트 수화물(CH)을 모르타르 콘크리트용 방수제 또는 고무 플라스틱용 충전제로 활용하기 위하여 스테아린산(SA)으로 처리하고 FT-IR, TGA, SEM, XRD, 접촉각층정기 등을 이용하여 CH-SA compound의 결합특성과 발수성을 측정하고, CH-SA compound를 레미탈에 사용하여 레미탈의 방수성을 알아 본 결과는 다음과 같이 요약된다. 1) 시멘트 수화물에 스테아린산을 2.0%이상만 처리하면 물레 대한 접촉각이 $120^{\circ}$이상으로 증가되면서 강한 발수성을 나타낸다. 2) 시멘트 수화물에 처리된 스테아린산은 스테아린산염 형태로 시멘트 수화물 표면에 고정된다. 3) 시멘트 수화물에 스테아린산을 5~10%처리한 CH-SA compound를 레미탈 중량의 3~6%정도 사용하면 레미탈의 압축강도는 5%정도 증가되며, 흡수비와 투수비는 각각 25%이하로 격감되어서 우수한 방수성을 나타낸다.

• 한국토양비료학회지
• /
• 제45권2호
• /
• pp.204-208
• /
• 2012

소수성 토양이란 물방울이 떨어져도 자연스럽게 젖지 못하고 표면 위에 그대로 존재하는 토양을 말한다. 소수성 토양은 토양입자들 사이 혹은 토양입자와 그 중간물질의 사이에 소수성 유기물질이 침투하여 입자를 코팅하여 소수성을 띠게 되는 것이다. 토양이 소수성화가 되면 심한 침식과 침출, 농약의 급속한 침출, 식물이 이용할 수 있는 많은 양의 물과 영양분의 손실 그리고 농작물과 목초의 생산성 감소 등을 야기한다. 본 실험에서는 미량원소가 어떤 흡착과 이동 메커니즘을 갖는지를 배치 실험과 컬럼 실험을 통해 비교 평가하였다. 배치 실험에서는 $Cu^{2+}$, $Mn^{2+}$, $Fe^{2+}$, $Zn^{2+}$ 및 $Mo^{5+}$를 이용하여 일반 토양과 소수성 토양의 수착의 차이, 소수성 정도에 따른 차이, 각각의 미량원소 별 차이를 비교 하였고, 컬럼 실험에서는 피흡착물질인 미량원소 $Fe^{2+}$ 및 $Mo^{5+}$에 대한 탈착성능 비교와, 특정시간에 따른 공간적 농도 분포를 측정하였다. $Fe^{2+}$와 $Mo^{5+}$의 경우 비소수성 토양보다 소수성 토양에서 더 높은 흡착을 나타났다. $Fe^{2+}$의 흡착성능은 소수성 토양별 40% > 15% > 0% 순으로 나타났다. 특히 $Mo^{5+}$의 경우 0%, 15% 및 40%의 소수성 토양에서 초기에는 비슷한 경향을 보였으나 시간이 지나면서 소수성 토양에서 비소수성 토양보다 빠른 탈착속도를 보였다. $Fe^{2+}$와 $Mo^{5+}$의 파과곡선 분석결과 소수성 토양에서 더 빠른 이동속도를 나타내었다.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.577-584
• /
• 1996

Silicon oxide films with high hardness and water repellency were prepared by microwave plasma-enhanced CVD using four kind of organosilicon compound-fluoro-alkyl silane mixtures as source gases. An argon gas was used as a carrier gas for fluoro-alkyl silane. The substrate temperatures during deposition were controlled by resistant heating at a constant value between 50 and $300^{\circ}C$. The hardness of the films increased, but the deposition rate and the contact angle for a water drop decreased with increasing substrate temperature. The number of methoxy groups also affected the water repellency and hardness. The deposited films became more inorganic with increasing substrate temperature because of the thermal dissociation of reactants.

• 접착 및 계면
• /
• 제15권4호
• /
• pp.151-160
• /
• 2014

이상적인 내발수 특성을 얻기 위해 유화중합을 이용하여 n-methyol acrylamide (n-MAM)와 stearyl methacrylate (SMA)의 단량체에 기능성 단량체인 PFOEA의 함량(0-8 wt%)에 따른 공중합체를 합성하였고, 추가적으로 2-(perfluorooctyl) ethyl acrylate (PFOEA) 함량이 4 wt%인 조성에 m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI)의 함량(1~4 wt%)을 첨가한 공중합체를 합성하였다. 유화중합을 위해 비이온 유화제인 tridecyl alcohol (TDA-7), 양이온유화제인 alkyl dimethyl amine derivatives(ADAD)를 사용하였고 개시제로는 2,2'-azobis (2-amidinopropane dihydrochoride) (AAPDL)을 사용하였다. 합성된 공중합체에 대해서 FT-IR spectra를 이용하여 구조분석을 하였고 표면특성 분석을 위해 접촉각, 표면에너지, 발수도 그리고 SEM을 측정하였으며, TGA와 DSC를 사용하여 열적 특성을 확인하였다. PFOEA와 TMI의 특정 함량에서 우수한 발수도와 높은 열적 특성을 보이는 공중합체가 합성됨을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제13권2호
• /
• pp.39-46
• /
• 1996

Durable softening water-repellenting agent such as PODCW, PDDCW and PEDCW were prepared by blending cationized compound such as poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate)[PODC], poly(2-dodecyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PDDC] and poly(2-ethylhexyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PEDC], and cationized compound of fatty carbamide, of which synthetic methods were reported in the previous paper, waxes, and emulsifiers. The results of physical tests of the P/C blended fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed a remarkable improvement of the physical properties. The prepared water-repellenting agents, PODCW-6 and PDDCW-1, were treated on P/C blended fabrics with and without resin. For any cases, there are a little changes between initial water repellency and repellency after 3 times washing of the fabrics. Therefore, the water-repellenting agents proved to be a durable agents, and initial water $100^{+}$ and $90^{+}$ point, respectively.

• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.1-9
• /
• 1993

The polymethylhydrosiloxane(PMHS) was synthesized by the co-hydrolysis of methyldichlorophydrosilane and ethyl ether, also polydimethylsiloxane(PDMS) was synthesized by the hydrolysis of dimethyl dichlorosilane and ethyl ether. The silk fabrics were treated with PMHS and PDMS in order to improve the water repellency and the wrinkle recovery. Also the effect of PMHS concentration, PDMS concentration and cure temperature on the physical properties of silk fabrics were studied. The maximum water repellency and maximum wrinkle recovery were obtained from the fabrics treated under the conditions 5%-PMHS and PDMS at 16$0^{\circ}C$, and 3%-PMHD and PDMS at 16$0^{\circ}C$, respectively. The tensile strength, the breaking elongation, the reflection and the bending properties of silk fabrics were not degraded severely by the treatment of PMHS or PDMS.