• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.575-586
• /
• 1999

From the environmental aspects, primary productivity of phytoplankton plays the most improtant role in enhancement of marine culture oyster production. This study may be divided into two branches; one is estimation of maximum oyster meat production per unit facility(Carrying Capacity) under the present enviromental conditions in Kamak Bay, the other is improvement of carrying from increase of primary productivity by changing the environmental conditions that cause not ot form an unfavorable environment such as the formation of oxygen deficient water mass using the eco-hydrodynamic model. By simulation of three-dimensional hydrdynamic model and ecosystem model, the comparison between observed and computed data showed good agreement. The results of sensitivity analysis showed that phytoplankton maximum growth rate was the most important parameter for phytoplankton and dissolved oxygen. The estimation of mean primary productivity of Wonpo, Kamak, Pyongsa, and Kunnae culture grounds in Kamak Bay during culturing period were 3.73gC/$m^2$/d, 2.12gC/$m^2$/d, 1.98gC/$m^2$/d, and 1.26gC/$m^2$/d, respectively. Under condition not ot form the oxygen deficient water mass, four times increasing of pollutants loading as much as the present loading from river increased mean primary productivity of whole culture grounds to 4.02gC/$m^2$/d. Sediment N, P fluxes that allowed for 35% increasing from the present conditions increased mean primary productivity of whole culture grounds to 3.65gC/$m^2$/d. Finally, ten times increasing of boundary loadings from the present conditions increased mean primary productivity of whole culture grounds to 3.95gC/$m^2$/d. The maximum oyster meat production per year and that of unit facility in actual oyster culture grounds under the present conditions were 6,929ton and 0.93ton, respectively. This 0.93ton/unit facility is considered to be the carrying capacity in study area, and if the primary productivity is increased by changing the environmental conditions, oyster production can be increased.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.87-92
• /
• 1999

The biggest challenge facing today manufacturing industry is better quality and high productivity. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of today are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. This paper reports the development of a automatic design system based on AutoCAD program. This work is composed of three section that are design of top down menu, guide frame and gate lifter for water-gate programed by AutoLISP language and runned Windows system. The developed system ultimately generates the design for a water gate through AutoCAD program. In the design of the water gate, it needs about 23 hours with an expert, but this system can be only 80 seconds without an expert.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.10-17
• /
• 2012

The middle and lower reaches of the Kum River system become stagnant in dry seasons with florishing of phytoplankton. In this study primary productivity of phytoplankton were measured by the C-14 uptake method and the P-I model method at seven main stream sites of the Kum River from the Daechung Dam outet to the river mouth. Nutrients (TN, TP, DIP, TIN) concentrations were measured in the mainstream and tributaries and compared with the variation of assimilation number. The range of primary productivity was $40{\sim}4,558mgC{\cdot}m^{-2}{\cdot}day^{-1}$ and it was higher than those of lentic ecosystems in Korea. Average TN and TP were $4.1mgN{\cdot}L^{-1}$, $70.6mgP{\cdot}m^{-3}$, respectively. Tributaries showed higher nutrient concentrations than the main stream. After two major tributaries merged with the discharging water of the Daechung Dam phyotplankton biomass and productivity increased drastically and remained at the similar eutrophic level through the downstream reach to the river mouth. Both dissolved phosphorus and nitrogen concentrations showed positive correlation with assimilation number of phytoplankton. In conclusion phytoplankton productivity is at the level of eutrophic water and it was higher than usual lentic habitats. Nutrient concentrations are critical factors in controlling productivity in the lower reach of the Kum River.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.133-138
• /
• 2019

BACKGROUND: Production function gives the equation that shows the relationship between the quantities of productive factors used and the amount of product obtained, and can answer a variety of questions. This study was carried out to evaluate the relationship between irrigation water used for rice production and rice productivity by the production function which shows the mathematical relation between input and output. METHODS AND RESULTS: The statistical data on rice production and on the amount of irrigation water were used for the production function analysis. The analysis period was separated for 1966-1981 and 1982-2011, based on goal's change on agriculture from 'increasing food' to 'complex farming'. The relation between irrigation and yield considering production function is a short-term production function both before and after 1982. These results can be expressed by the sigmoid relation. When comparing the graphs of the two analyzed periods, there are differences in quantity between the maximum point and the minimum point during the same analysis period, which can be called an 'Irrigation Effect' by the difference of irrigation, and 'Technical Effect' by the difference by inputs like as fertilizers etc. CONCLUSION: The results could be useful as information for assessing the relationship between agricultural water and the productivity of rice and predicting rice productivity by irrigation water in Korea.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.1019-1022
• /
• 2006

Satellite sea ice data from 1978 to the present reveal that the perennial ice (or ice that survives the summer) has been rapidly declining at almost 10% per decade. Warming due to increases in greenhouse gases in the atmosphere is now also being reflected in winter with drastic reductions in the maximum extent observed in 2005 and 2006. The retreat of the perennial ice also exposes more open water and has revealed an asymmetric distribution of chlorophyll a pigment concentration in the Arctic basin. Phytoplankton blooms are most dominant at high latitudes, partly on account of sea ice, but in the Arctic basin, it appears that pigment concentrations in the Eastern (Laptev Sea) Region are on the average three times higher than those in the Western (Beaufort Sea) Region. Such asymmetry suggests that despite favorable conditions provided by the melt of sea ice, there are other factors that affects the productivity of the region. The asymmetry is likely associated with much wider shelf areas in the East than in the West, with sea ice processes that inhibits the availability of nutrients near the surface in deep water regions, and river run-off that affects nutrient availability. The primary productivity in the pan-Arctic region have been estimated using the pigment concentrations and PAR derived from SeaWiFS data and the results show large seasonal as well as interannual variability during the 1998 to 2005 period. The data points towards increasing productivity for later years but with only 9 years of data it is too early to tell the overall effect of the sea ice retreat.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.319-323
• /
• 2015

This study investigated the effects of the light conditions on the productivity of scenedesmus dimorphus in the continuous mass cultivation system. To compare the algal productivity according to the light conditions, S. dimorphus was cultivated continuously under the wide range of light intensity(200-600 PPFD) and various light wavelength(white light and red-blue mixed light). After 100 days of cultivation under the different light intensity, the productivity of S. dimorphus increased as light intensity decreased. So, the productivity was maximized as 100 mg/L/d when light intensity was 200 PPFD. In case of light wavelength, the productivity of S. dimorphus was enhanced about 20% with the white light compared to that of the red-blue mixed light. Consequently, the optimal light conditions for the continuous mass cultivation of S. dimorphus were 200 PPFD as light intensity and white light as light wavelength.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.848-849
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.447-451
• /
• 2010

It is quite important for manufacturing firms to stably secure water, because industrial water is used for a variety of purposes as one of the important inputs in the production process. Despite the significance of industrial water use and the increase of industrial water demand, relatively little has studied regarding the industrial water use in Korea. This paper employs the marginal productivity approach in order to estimate the economic value of water in Korean manufacturing industry, and we use the information of 53,912 factories surveyed in 2003. The result of the likelihood ratio test shows that Trans-log is an appropriate model for estimating the data of this study. In Trans-log function model, the industry-wide output elasticity of water is 0.0104, and the marginal value is KRW 1,156 per ton. The estimated values differ across the sectors and these values range from the high value of about KRW 13,760 per ton in the transportation equipment sector to low values of KRW 428 per ton in the precision instrument sector. The research provides useful information to help policy-makers in developing and implementing more appropriate policies regarding the management and distribution of water resources by estimating the value of water resources by sector. In addition, Korean government enables the drafting of future water pricing scenarios based on the estimated value information.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.4
• /
• pp.27-33
• /
• 2019

Agricultural water for crops are faced with the need to improve the use efficiency due to the impact of climate change. Water productivity (WP) is known as a good indicator for assessing resources efficiency. This study was conducted to assess WP of rice and potential water consumption (PWC) as new indicator for water use efficiency assessment. The average of WP was 0.7 kg/㎥, and Jeonbuk had the highest WP as 0.83 kg/㎥. Kangwon and Kyungbuk had the lowest WP as 0.59 kg/㎥. PWC showed the same trend because of rice consumption per capita, but Total PWC considering population living in each province showed the different trend with PWC. Every year, the changing patterns of WP was increasing little by little, and the patterns of PWC was decreasing greatly than WP. These results mean that WP has been slowly improved through breed development and irrigation techniques, and PWC was affected by reduced rice consumption and WP increasing. PWC could also be useful as an indicator to compare the water use efficiency between provinces or nations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.32-40
• /
• 2001

It is desirable to reduce the amounts of fresh water and reuse the recycled water in papermaking process. In an attempt to improve the efficiency of recycling water refining treatment and to enhance the productivity of OCC recycling mill, up flow anaerobic sludge blanket(UASB) reactor was developed and introduced to Korea recently. In order to maximize the operating efficiency and minimize the adverse side effects it is imperative to estimate and evaluate the total effects of new system, UASB on the whole OCC recycling process. This study was carried out with a view to investigate the effects of the high temperature and alkalinity of process water on the quality ad productivity of testliner of OCC recycling mill which is equipped with UASB reactor and almost closed. Another object of this study was searching for the best available use of UASB treated process water. The results were as follows; Reuse of UASB treated water characterized with high temp and alkalinity was useful to improve the strength and drainage properties of recycled OCC owing to its good points of promoting OCC disintegration and reducing the calcium hardness of process water. However, it might not be avoidable to induce the increase of dissolved solids in process water in accordance with direct introducing of UASB treated water into the former stage of OCC stock preparation. So it would be advisable to adopt the UASB treated water in the stage of clean, screened OCC stock.