• 한국ITS학회 논문지
• /
• 제17권1호
• /
• pp.114-122
• /
• 2018

본 논문은 맨홀 아래 지하에 매설된 상수도관의 수압을 효율적으로 측정하기 위하여 무선통신 모듈을 내장한 수압센서(IoT)를 모든 상수도관 밸브에 설치하여 수압을 측정하도록 하였다. 측정한 데이터는 무선 통신으로 스마트폰에 전송하고 스마트폰은 수신한 데이터를 다시 서버로 전송하여 저장하고 관리할 수 있도록 하는 새로운 수압측정 시스템을 제안하였다. 담당자들은 서버에 저장된 수압 데이터를 원격에서 조회하여 상수도관의 누수 여부나 관리지역 내의 수압의 적정성 여부 등을 확인하여 이상 여부를 체크할 수 있도록 함으로써 상수도관의 수압을 효율적으로 관리할 수 있다.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1126-1133
• /
• 2004

This paper presents an experimental measurement of effective thermal conductivity in an adsorbent packed bed with silica gel A type. The effective thermal conductivity was measured under different conditions of the adsorbent bed temperature, pressure, particle size and water content by using the transient hot wire method. The measured effective thermal conductivity showed to become bigger with decreasing particle size or increasing water content, but it was a little affected with increasing bed temperature and pressure. The bed temperature was varied in the range of 1$0^{\circ}C$ (equation omitted) T (equation omitted) 5$0^{\circ}C$ and the pressure in the range of 10 kPa (equation omitted) P (equation omitted) 190 kPa. The results show that 0.10～0.18 W/mㆍK of effective thermal conductivity measured for the zero water content.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.583-594
• /
• 1994

자연사면 붕괴의 주요인의 하나는 연약층에서의 간극수압 상승이다. 따라서 이 연약층내의 간극수압 계측이 중요하다. 본 연구는 피압지하수위, 풍화암반 파쇄대의 투수성 그리고 연약층의 풍화정도를 고려한 간극수압 계측의 실내모형 실험이다. 제3기층 붕괴형과 붕괴성 붕괴형의 모형으로 피압지하수 상태에서 filter의 투수성에 따른 연약층내에서의 간극공기압 및 간극수압의 반응을 측정하였다. 간극압의 반응양상에 있어서 제3기층 붕괴형은 시간 변화에 따라 반응양상이 계단형(step type)으로 나타났고 붕괴성 붕괴형은 파형(wave type)으로 나타났다. 간극수압 반응율은 제3기층 붕괴형이 붕괴성 붕괴형보다 크며, 연약층의 풍화도의 증가에 따라 간극수압 반응율은 감소하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.95.1-95
• /
• 2002

<1. New level meter inside the fuel tank> Ultrasound level sensors are widely applied as level meters of liquid tank. Measurement instrument of level between water and fuel is developed. Since the fuel is inflammable, the sensor system doesn't allow to include any electric circuit inside the fuel tank. The optical cable sensor can satisfy this explosive condition. The measurement method with ultrasonic sensor is attached on the tank wall or tank manhole lid. The pressure sensor can't be applied inside the gasoline fuel tank. An ultra-sonic sensor doesn't detect a enough signal reflected from water level deep under gasoline fuel. The pressure sensor is difficult to measure the height o...

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.229-234
• /
• 2015

Depending on the living styles, the types of energy consumed by households have changed, and the consumption has increased rapidly. Consequently, those have led to environmental issues, such as exhaustion of energy and the climate changes. As one of solutions to such issues, energy efficiency can be approached. Therefore, in this study, the gas water heater(115S type Rheem products) that made in Germany and obtain hot water using gas as a heat source is selected. a $1.0m^3$ water tank with a 6kW electronic heater is installed and a water temperature and pressure is maintain constantly also thermometer is injected. Two of gas meter, one of pressure regulator and three of time measurement devices are installed in a combustion facility and fuelling facility with a magnet valve so it can observe and record combustion reactions. Quantity of hot water that heated by boiler is recorded using a quantity measurement tank, and have been heated by the boiler have been to record and measure the amount and utilized the data acquired through measurement of all factors that are applied to acquire hot water in order to calculate the use rate of final energy. In conclusion, this researcher drew the economic strong points of the hot water generated by gas.

• Journal of Photoscience
• /
• 제5권1호
• /
• pp.33-37
• /
• 1998

One macroscopic effect in the free-running Er:YAG laser is an accumulation of microscopic effects. Understanding of the exogenous water induced mechanical effect on the dental hard tissue by the Qswitched Er:YAG laser has an important impact on the further understanding of the free-running Er:YAG laser ablation on the dental hard tissue. The Q-switched Er:YAG laser (1-$\mu$s-long pulse width) was used in the recoil pressure measurement with an aid of water-jet system and a pressure transducer. The amplitude of the recoil pressure depends on the tooth surface conditions (dry and wet) and the volume of the water upon it. Wet surfaces yielded higher recoil pressure than that of dry, surface, and as the volume of the exogenous water drop increased, the amplitude of the recoil pressure increased also.

• 대한토목학회논문집
• /
• 제30권4C호
• /
• pp.185-191
• /
• 2010

축전이기법을 사용하는 체적압력판추출기(이하 체적압력판)로 실내시험실에서 함수특성곡선을 구할 수 있다. 체적압력판을 사용하면, 매 단계마다 공기압을 차단하지 않고 시험하는 동안 흙시료로부터 추출되는 간극수의 부피를 연속적으로 측정할 수 있는 장점이 있다. 반면에, 시료내 간극수압을 일정하게 유지하기 위하여, 에어 트랩, 발라스트 튜브, 저장뷰렛, 진공펌프 등을 사용하는 체적압력판의 추출수 부피측정은 매우 복잡하고 지루한 작업을 수반한다. 이러한 문제점을 개선하고자 수정체적압력판을 개발하여 풍화잔류토에 대한 시험을 수행하였다. 수정 시험기는 매트릭석션의 범위에 따라 ASTM D 6836-02의 Method A와 Method B 두 방법 모두 사용하여 추출수의 부피를 측정할 수 있다. 본 논문에서는 수정 시험기의 측정원리, 개선점, 시험결과 및 토의를 서술하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.518-530
• /
• 2020

The present study concerns the stern slamming load of container carriers, with stern bulb arrangement variation. First, a series of wedge drop tests were conducted using simple wedge models with fixed deadrise angles, and tests with the cross-section models of practical container carrier sterns were followed. The deadrise angle of the simple wedge ranged from 0° to 10°. The pressure measurement results of the simple wedge drop tests were distributed between empirical formula and analytic solution, so the experimental setup was validated. In the cases of practical hull cross-sections, the water entry of the bulb prior to that of the transom resulted in characteristic water film generation and delayed pressure peak appearance. The trapped air between the bulbs damped the pressure in the twin skeg hull case, reducing the pressure peak and causing the pressure oscillation during water entry.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.67-72
• /
• 2012

건축물 실내에서의 화재발생 시 초기 소화설비로 적용하고 있는 옥내소화전설비와 스프링클러설비는 초기화재 진압용으로 큰 역할을 담당하고 있다. 최근 건축물의 지붕형태는 차별화된 지역문화와 디자인이 접목된 다양한 형태의 건축물이 건립되고 있다. 차별화된 지붕형태, 즉 일부 건축물의 지붕형태가 경사(박공)형태로 계획 건립되고, 또한 공중정원을 활용한 조망계획을 하다 보니 옥내소화전설비의 방수압력을 측정하는데 있어 옥상공간은 제한적이고, 너무 협소하여 옥내소화전 소방호스를 전개(최대 5개)하여 방수압력 측정하는데 있어 문제점이 도출되고 있다. 이러한 문제점을 보완하여 옥내소화전설비의 효율적인 관리와 화재 시 초동조치가 가능하도록 개선방안을 연구하고자 한다.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.38-44
• /
• 2002

The purpose of this study is to investigate the effect of the volume fraction of water and injection pressure on the spray characteristics of water/oil emulsified fuel injected from the pressure swirl atomizer. The mixture of light oil and water by using impeller mixer was performed. The spray characteristics such as SMD and velocity were measured using PDPA. The injection pressures were 7.5, 100, 200 and $300kgt/cm^2$ and volume fractions of water in emulsified fuel were 0, 10, 20 and 30%, respectively. The measurement sections were at 30, 60 and 90mm from injection nozzle tip. SMD and velocity of emulsified fuel were larger gradually by increasing the volume fraction of water in emulsified fuel. The spray angle was decreased and axial velocity was increased with increase in water content. It was found that the relative SMD ratio was increased more greatly than the relative axial velocity ratio in super critical pressure. The relative SMD ratio was increased and the relative axial velocity ratio was decreased with increase injection pressure at spray downstream.