• 제목/요약/키워드: Water Level Prediction

검색결과 347건 처리시간 0.026초

농업용 호소의 조류 발생 진단을 위한 간편 도구의 개발 (Development of simple tools for algal bloom diagnosis in agricultural lakes)

  • 남귀숙;이승헌;조현정;박주현;조영철
    • 환경생물
    • /
    • 제37권3호
    • /
    • pp.433-445
    • /
    • 2019
  • 본 연구는 농업용 호소의 녹조발생을 간편하고, 효율적으로 진단할 수 있는 도구를 개발하고자 하였다. 2018년 4월~10월 동안 15개 농업용 호소에서 채취된 182개의 시료를 이용하여 식물플랑크톤 현존량을 반영할 수 있는 수질 이화학적 항목을 살펴보고자 식물플랑크톤과 TN, TP, Chl-a, SD 등의 상관계수(r)를 분석한 결과, 총 식물플랑크톤 현존량은 Chl-a (r=0.666), SD (r= -0.351)와 높은 상관관계, 남조류와 유해 남조류 현존량 역시 Chl-a과 각각 r=0.664, r=0.353, SD와 각각 r= -0.340, r= -0.338로 유의성 있는 상관관계를 보여주었으나 TN, TP의 항목과는 유의한 상관관계가 나타나지 않았다. Chl-a 농도는 SD와 r= -0.434의 상관관계를 보여주어 식물플랑크톤 현존량보다 높은 유사성을 나타냈으므로, 조류경보제에서 사용하는 유해 남조류 현존량 분석을 대신하여 녹조예찰을 위한 진단 요소항목으로 Chl-a와 SD를 선정하고 실시간 SD 실측 값을 이용하여 진단을 할 경우 그 결과에 대한 유의성이 있는 것으로 판단되었다. 녹조진단 도구는 SD와 탁도 측정방법을 변형한 역원뿔 모양의 용기와 녹조판단조견표로 구성되어 있으며, 현장수를 채취하여 녹조발생 정도에 따라 용기 내에 보이는 원형환의 개수 또는 각 원형환에 표시된 숫자를 관찰하고, 조류의 색도를 녹조판단조견표와 비교하여 최종 녹조단계를 판별할 수 있도록 하였다. 또한, 정확한 진단을 위해 Chl-a 농도와 원형환의 수에 근거한 4단계 진단 기준과 Hexa 코드명이 표기된 부채모양의 조견표를 제시하여 한가지 방법에 따른 변수와 오차를 보완하고 판단의 편리성을 함께 제공하였다. 이를 통해 농업용 호소의 녹조진단을 용이하게 할 수 있을 것으로 기대되며, 녹조관리방안 수립을 효율화하여 녹조로부터 안전하고 건강한 농업용수 확보가 가능할 것으로 판단된다.

국내 실정에 적합한 스마트팜 개발 전략 -6차산업의 발전을 위한 ICT 기술적 특성을 중심으로- (Smart farm development strategy suitable for domestic situation -Focusing on ICT technical characteristics for the development of the industry6.0-)

  • 한상호;주형근
    • 디지털융복합연구
    • /
    • 제20권4호
    • /
    • pp.147-157
    • /
    • 2022
  • 본 연구는 국내 사정에 적합한 스마트팜 기술 전략을 ICT 기술의 국내 사정에 적합한 차별화를 중심으로 제안하고자 했다. 해외 농산업 선진국의 경우 각 나라의 지형적 특성, 농산업 특성, 국민 수요 특성 등을 전반적으로 반영한 특정 단계 개발에 주력함을 확인했으나, 국내 스마트팜의 경우 해외 기술을 여과 없이 수용하여 국내사정에 적합한 기술의 선별적 개발이 수행되지 않음을 확인했다. 따라서, 본 연구는 국내 농촌 인구의 급격한 감소, 인구 고령화, 농작물 가격 경쟁력 상실, 휴경지 증가, 경지 이용률 감소 등 문제에 따라, 차후 스마트팜 ICT 기술 개발 방향성을 품질 좋은 농산물을 창출하여 가격 경쟁력을 갖추기 위한 성능의 우수함, 노동인구 고령화에 따른 사용의 용이성, 영세한 경영규모에 적합한 경제성 등에 주목하여 스마트팜을 추진해야 함을 제시했다. 첫째, 경제성 차원에서 영세농가(1차) 경영환경에 필요한 기능들만 선별하여 ICT 기술을 구성하고, 이들과 원활한 의사소통 체계를 ICT 기술에 적용하여 실제 농가에서 필요로 하는 기능을 점차적으로 업데이트함으로써 비용 감소에 일조할 수 있음을 제안했다. 둘째, 성능차원에 있어서는 국내 고령화 인구에 적합한 빅데이터 난이도 조절, 이들에게 적합한 언어사용, 이들의 예측 성향을 반영한 알고리즘 설정 등 ICT의 의사소통 기능 개선에 주목한다면 작동 정확성을 증대할 수 있음을 제안했다. 셋째, 사용용이성 차원이다. 6차산업(1차(농업,임업)+2차(농수산물가공)+3차(서비스,농어촌체험,유통)) 발전을 위한 ICT 기술에 기반한 스마트팜은 특정 명령어에 따라 동작을 수행하는 바, 특정 명령에 빅데이터에 근거한 추론을 통한 추가적 기능들이 자동적으로 수반될 것과, 각 지역적 환경에 맞춤화된 빅데이터 구성에 기반한 장치를 미리 세팅, 표준화하여 사용용이성을 촉진할 수 있음을 최종 제시했다.

설비공학 분야의 최근 연구 동향 : 2016년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2016)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제29권6호
    • /
    • pp.327-340
    • /
    • 2017
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

Manganese and Iron Interaction: a Mechanism of Manganese-Induced Parkinsonism

  • Zheng, Wei
    • 한국환경성돌연변이발암원학회:학술대회논문집
    • /
    • 한국환경성돌연변이발암원학회 2003년도 추계학술대회
    • /
    • pp.34-63
    • /
    • 2003
  • Occupational and environmental exposure to manganese continue to represent a realistic public health problem in both developed and developing countries. Increased utility of MMT as a replacement for lead in gasoline creates a new source of environmental exposure to manganese. It is, therefore, imperative that further attention be directed at molecular neurotoxicology of manganese. A Need for a more complete understanding of manganese functions both in health and disease, and for a better defined role of manganese in iron metabolism is well substantiated. The in-depth studies in this area should provide novel information on the potential public health risk associated with manganese exposure. It will also explore novel mechanism(s) of manganese-induced neurotoxicity from the angle of Mn-Fe interaction at both systemic and cellular levels. More importantly, the result of these studies will offer clues to the etiology of IPD and its associated abnormal iron and energy metabolism. To achieve these goals, however, a number of outstanding questions remain to be resolved. First, one must understand what species of manganese in the biological matrices plays critical role in the induction of neurotoxicity, Mn(II) or Mn(III)? In our own studies with aconitase, Cpx-I, and Cpx-II, manganese was added to the buffers as the divalent salt, i.e., $MnCl_2$. While it is quite reasonable to suggest that the effect on aconitase and/or Cpx-I activites was associated with the divalent species of manganese, the experimental design does not preclude the possibility that a manganese species of higher oxidation state, such as Mn(III), is required for the induction of these effects. The ionic radius of Mn(III) is 65 ppm, which is similar to the ionic size to Fe(III) (65 ppm at the high spin state) in aconitase (Nieboer and Fletcher, 1996; Sneed et al., 1953). Thus it is plausible that the higher oxidation state of manganese optimally fits into the geometric space of aconitase, serving as the active species in this enzymatic reaction. In the current literature, most of the studies on manganese toxicity have used Mn(II) as $MnCl_2$ rather than Mn(III). The obvious advantage of Mn(II) is its good water solubility, which allows effortless preparation in either in vivo or in vitro investigation, whereas almost all of the Mn(III) salt products on the comparison between two valent manganese species nearly infeasible. Thus a more intimate collaboration with physiochemists to develop a better way to study Mn(III) species in biological matrices is pressingly needed. Second, In spite of the special affinity of manganese for mitochondria and its similar chemical properties to iron, there is a sound reason to postulate that manganese may act as an iron surrogate in certain iron-requiring enzymes. It is, therefore, imperative to design the physiochemical studies to determine whether manganese can indeed exchange with iron in proteins, and to understand how manganese interacts with tertiary structure of proteins. The studies on binding properties (such as affinity constant, dissociation parameter, etc.) of manganese and iron to key enzymes associated with iron and energy regulation would add additional information to our knowledge of Mn-Fe neurotoxicity. Third, manganese exposure, either in vivo or in vitro, promotes cellular overload of iron. It is still unclear, however, how exactly manganese interacts with cellular iron regulatory processes and what is the mechanism underlying this cellular iron overload. As discussed above, the binding of IRP-I to TfR mRNA leads to the expression of TfR, thereby increasing cellular iron uptake. The sequence encoding TfR mRNA, in particular IRE fragments, has been well-documented in literature. It is therefore possible to use molecular technique to elaborate whether manganese cytotoxicity influences the mRNA expression of iron regulatory proteins and how manganese exposure alters the binding activity of IPRs to TfR mRNA. Finally, the current manganese investigation has largely focused on the issues ranging from disposition/toxicity study to the characterization of clinical symptoms. Much less has been done regarding the risk assessment of environmenta/occupational exposure. One of the unsolved, pressing puzzles is the lack of reliable biomarker(s) for manganese-induced neurologic lesions in long-term, low-level exposure situation. Lack of such a diagnostic means renders it impossible to assess the human health risk and long-term social impact associated with potentially elevated manganese in environment. The biochemical interaction between manganese and iron, particularly the ensuing subtle changes of certain relevant proteins, provides the opportunity to identify and develop such a specific biomarker for manganese-induced neuronal damage. By learning the molecular mechanism of cytotoxicity, one will be able to find a better way for prediction and treatment of manganese-initiated neurodegenerative diseases.

  • PDF

도시공원에서 벤치의 배치장소에 따른 이용자의 시각적 선호도에 관한 연구 (A Study on the Visual Preference of Users according to the Location of Benches at Urban Community Parks)

  • 유상완;문석기;권상준
    • 디자인학연구
    • /
    • 제13권2호
    • /
    • pp.95-102
    • /
    • 2000
  • 본 연구는 도시공원내 벤치의 배치장소가 이용자의 선호도에 어떻게 영향을 주고 있는가를 파악하고자 하였다. 이를 위해 도시근린공원내 벤치의 대표적인 배치장소의 유형을 크게 4가지로 구분하고 각 배치장소별 시각적 특성과 형용사 항목들의 차이 등을 설명하고자 분산분석과 던칸분석을 실시하였다. 이상의 결과를 요약해 보면 아래와 같다. 1.벤치의 배치장소별 시각적 특성을 구성하는 인자는 감정적요인,시각적요인,물리적/개성적요인,명료성 요인,밀도요인 등 모두 5가지 요인으로 구분되었다. 이들 5가지 요인들의 설명력은 60.40%였으며,이들 요인중 심리적반응을 표현하는 감적적 요인이 가장 높게 평가되었다.2. 앞의 요인분석 결과로부터 도출된 5가지의 요인별 시가적 특성은 형용사 변인들이 배치장소별로 다르게 지각되고있는 것으로 확인되었다. 특히 조사결과 대부분의 형용사 이미지 변인들이 통계적인 유의성을 보이며 Spot1->Spot Spot 4->spot 2-> spot3의 순으로 평균점수를 나타내고 있어,벤치의 배치장소가 수변과 인접해 배치된 유형을 가장 선호하고 있는 것으로 나타났으며, 인공재료 및 인위적인 공간과 연계되어 배치되었을 것으로 나타났으며,인공재료 및 인위적인 공간과 연계되어 배치되었을 때의 선호도가 낮아지고 있음을 확인할 수 있었다. 한편, 본연구는 앞으로 검토되어야 할 것 으로 첫째 제한된 설문대상자 외에도 연령별,계층별로 다각적인 접근을 통한 선호도 조사가 지속적으로 수행되어야 한다. 둘째 본 실험에 사용된 대표적인 4가지 유형외에도 실험 대상을 확대시킬 필요가 있다. 셋째 보여지는 대상과 장소의 시각적 특성 뿐만 아니라 벤치에 앉았을 때 관찰되는 주변경관의 시각적 특성 등에 대한 조사 연구도 동시데 뒷받침될 필요가 있다.그럼에도 불구하고 본 연구결과를 통해 공원시설물 디자인을 함에 있어 유용한 자료로 활용을 기대할 수 있을 것이다.고 있다.석한후 그 결과를 종합적으로 해석함으로써 더 유효성이 높은 접근 가능성을 모색하고자 하였다. 시스템 에서 포도당을 낮은 level로 유지할 수 있었으나, 초산의 과도한 축적으로 항체 생산성의 향상은 예상에 비해 크지 않았다. 81%), C18 0(12.38%), C18: 1(25.93%), C22:6(9.95%)이며 결합지방질(結合脂肪質)은 C14 : 0(11.60%), C16 : 0(18.94%), C16: 1(10.42%). C18 : 1(10.89%), C22 : 6(23.44%)이었다. 총필수지방산(總必須脂肪酸) 함량(含量)은 극성지방질(極成脂肪質)$(20.14{\sim}31.12%)$이 비극성지방질(非極成脂肪質)$(6.97{\sim}11.13%)$보다 훨씬 높았고, 결합지방질(結合脂肪質)이 유리지방질(遊離脂肪質)보다 높았으며 부위별(部位別)로는 피부(皮部)$(15.18{\sim}15.41%)$가 육질부(肉質部)$(6.97{\sim}11.13%)$보다 높았다. 또${\omega}3$고도부포화지방산(高度不飽和脂肪酸) 함량(含量)은 육질부(肉質部)$(15.15{\sim}28.32%)$가 피부(皮部)$(6.77{\sim}18.18%)$나 내장부(內臟部)$(8.35{\sim}9.74%)$보다 높았으며, 육질부(肉質部)에서는 극성지방질(極成脂肪質)$(26.28{\sim}34.18%)$이 비극성지방질(非極成脂肪質)$(15.15{\sim}28.32%)$보다 높았다.veral world-wide prediction models. Based on the analysis, we can easilty know the importance of the model

  • PDF

Deep Neural Network와 Convolutional Neural Network 모델을 이용한 산사태 취약성 매핑 (Landslide Susceptibility Mapping Using Deep Neural Network and Convolutional Neural Network)

  • 공성현;백원경;정형섭
    • 대한원격탐사학회지
    • /
    • 제38권6_2호
    • /
    • pp.1723-1735
    • /
    • 2022
  • 산사태는 가장 널리 퍼진 자연재해 중 하나로 인명 및 재산피해 뿐만 아니라 범 국가적 차원의 피해를 유발할 수 있기 때문에 효과적인 예측 및 예방이 필수적이다. 높은 정확도를 갖는 산사태 취약성도를 제작하려는 연구는 꾸준히 진행되고 있으며 다양한 모델이 산사태 취약성 분석에 적용되어 왔다. 빈도비 모델, logistic regression 모델, ensembles 모델, 인공신경망 등의 모델과 같이 픽셀기반 머신러닝 모델들이 주로 적용되어 왔고 최근 연구에서는 커널기반의 합성곱신경망 기법이 효과적이라는 사실과 함께 입력자료의 공간적 특성이 산사태 취약성 매핑의 정확도에 중요한 영향을 미친다는 사실이 알려졌다. 이러한 이유로 본 연구에서는 픽셀기반 deep neural network (DNN) 모델과 패치기반 convolutional neural network (CNN) 모델을 이용하여 산사태 취약성을 분석하는 것을 목적으로 한다. 연구지역은 산사태 발생 빈도가 높고 피해가 큰 인제, 강릉, 평창을 포함한 강원도 지역으로 설정하였고, 산사태 관련인자로는 경사도, 곡률, 하천강도지수, 지형습윤지수, 지형위치 지수, 임상경급, 임상영급, 암상, 토지이용, 유효토심, 토양모재, 선구조 밀도, 단층 밀도, 정규식생지수, 정규수분지수의 15개 데이터를 이용하였다. 데이터 전처리 과정을 통해 산사태관련인자를 공간데이터베이스로 구축하였으며 DNN, CNN 모델을 이용하여 산사태 취약성도를 작성하였다. 정량적인 지표를 통해 모델과 산사태 취약성도에 대한 검증을 진행하였으며 검증결과 패치기반의 CNN 모델에서 픽셀기반의 DNN 모델에 비해 3.4% 향상된 성능을 보였다. 본 연구의 결과는 산사태를 예측하는데 사용될 수 있고 토지 이용 정책 및 산사태 관리에 관한 정책 수립에 있어 기초자료 역할을 할 수 있을 것으로 기대된다.

수도 수량구성요소에 미치는 기상영향의 해석적 연구 (Analysis of the Effects of Some Meteorological Factors on the Yield Components of Rice)

  • 박석홍
    • 한국작물학회지
    • /
    • 제18권
    • /
    • pp.54-87
    • /
    • 1975
  • 수도 수량구성요소에 미치는 몇가지 기상요인의 기여율과 수량 구성요소의 지역내 년차 변이 및 년차내 지역 변이를 검토하여 수도 재배법 개선 및 작황 예측의 참고 자료를 얻고서 1966년부터 1973년까지 8개년간 3개 작물시험장 및 각 도 농촌진흥원포장에서 실시한 수도 작황 시험성적을 재료로 하여 표준 편회귀분석법을 적용 분석한 결과를 요약하면 다음과 같다. 1. 수도 수량에 미치는 수량 구성요소의 기여율은 보통기 재배에서는 수수가 가장 크고, 적파 만식재배 및 북부 지방에서의 보통기재배에서는 등숙비율이 가장 크게 나타났다. 2. 수량 구성요소의 년차 기여율은 수수가 가장 크고, 해에 따라서는 등숙비율과 현미 1,000립중이 컸으며 통일은 단위 면적당 경화수가 수량성립에 크게 영향하였다. 3. 수량 구성요소의 기여율을 적용하여 지역별 수량성립 유형을 1) 영양생장 의존형(V), 2) 편영양생장 의존형(P.V), 3) 중간형(M), 4) 편등숙 의존형 (P.R) 5) 등숙 의존형(R)으로 분류하였다. 대체로 남부지방에서는 단위 면적당 경화수 의존도가 크고 중북부에서는 등숙요소의 의존도가 컸다. 4. 수량에 대한 수량구성 4요소의 회귀식을 상승적인 식에서 대수변환하여 가산적인 식으로 작성하였던바 보통기 재배나 적파 만식재배에서 다같이 가산적인 식으로 계산하였을 때 정도높은 수량측정을 할 수 있었다. 5. 분약 각기의 경수와 수수와의 관계는 보통기재배에서나 만식 재배에서 이앙후 20일부터 유의적인 정의 상관을 인정할 수 있었다. 6. 수수는 이앙후 21∼30일의 기상요인과 가장 밀접한 관계가 있었다. 7. 각기상 요인들의 최고분약수에 미치는 기여율은 이앙후 31∼40일의 평균기온의 기여율이 가장 크고 일조시간의 기여율은 11∼30일의 컸으며 수온의 기영율은 대체로 적었다. 8. 수수의 조기 측정은 경수만의 단요인이나 기상 요인만을 조합한 것보다는 이앙후 20일경수와 이앙후 20∼40일의 최고기온, 기온교차 및 일조시간 등 복합 요인을 조합하므로서 정도 높은 추정식을 작성할 수 있었다. 9. 수당 경화수와 기상 요인과는 출수전 25∼34일에 가장 밀접한 관계가 있었는데 중북부에서는 최고기온과 일조시간의 기여율이 컸고, 남부에서는 최저기온과 일조시간의 기여율이 컸으며 최저기온은 부치를 나타냈다. 10. 각 기상 요인들의 등숙비율에 미치는 기여율은 최고기온이 가장 크고 최저기온은 출수전이나 등숙 초기에 부치를 나타냈다. 11. 현미 1,000립중에 미치는 기상요인의 기여율은 최고기온이 등숙초기나 중기에 높고 최저기온은 등숙기간에 대체로 부치를 나타냈다.

  • PDF