• Asian-Australasian Journal of Animal Sciences
• /
• 제12권1호
• /
• pp.28-35
• /
• 1999

The effects of addition of celulases (A cremonium cellulolyticus and Trichoderma viride, CE), a commercial inoculum containing lactic acid bacteria (Lactobacillus casei, LAB), fermented green juice (macerated napier grass with water was incubated anaerobically with 2% glucose for 1 day, FGJ) and glucose (G), and regional difference of ensiling on napier grass (Pennisetum purpureum Schum.) silage were studied by using 900 ml laboratory glass bottle silos under 30 and $40^{\circ}C$ storage conditions in 1995 and 1996. Experiment 1 was carried out to compare the addition of CE, LAB, FGJ and the combinations. Silages were stored for 45 days after ensiling. Experiment 2 studied the effects of applications of CE, LAB, FGJ and G. Experiment 3 was carried out using the similar additives as experiment 2 except for LAB. Silages were stored for 60 days in the experiments 2 and 3. Experiments 1 and 2 were done in Nagoya, and experiment 3 in Okinawa. Sugar addition through CE or G improved the fermentation quality in all the experiments, which resulted in a greater decrease in the pH value and an increased level of lactic acid, while butyric acid contents increased under $30^{\circ}C$ storage condition in CE addition. LAB and FGJ additions hardly affected the silage fermentation quality without additional fermentable carbohydrate. But the combination of LAB, FGJ and glucidic addition (CE and G) improved the fermentation quality. The effect of the regional difference of ensiling between temperate (Nagoya; $35^{\circ}$ N) and subtropical (Okinawa; $26.5^{\circ}$ N) zones on silage fermentation quality was not shown in the present study.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.389-393
• /
• 2002

The marginal integrity of the crown can be broken during endodontic access cavity preparation due to the vibration of burs. Therefore, the purpose of this study was to evaluate the effect of endodontic access cavity preparation on the marginal leakage of full veneer gold crowns. 24 intact molars were mounted in acrylic resin blocks and prepared for crowns by a restorative dentist and crowns were cast with gold alloy. 20 Crowns were cemented with glass ionomer cement and 2 crowns were not cemented for positive control. 200 thermo-cycles from 5$^{\circ}C$ to 5$0^{\circ}C$ with a travel time of 20s were completed. Then samples were randomly divided into 2 experimental groups of 9 each. Endodontic access preparation and zinc-oxide eugenol temporary fillings were done in Group 1. Teeth in Group 2 were not treated. Samples were coated with 2 layers of nail varnish and were immersed in 1% methylene blue dye for 20 hrs. Endodontic access was prepared in 2 samples, which were coated with nail varnish on all surfaces for negative control. After washing in running water gold crowns were cut with a #330 bur. Four buccolingual sections, 2 mm apart, were cut from the central section of each tooth and were examined and scored under the microscope for dye leakage. Score 1: leakage to the cervical 1/3 of the axial wall, Score 2: leakage to the middle 1/3 of the axial wall, Score 3: leakage to the coronal 1/3 of the axial wall, Score 4: leakage to the occlusal surface. The median value for Group 1 is 4 and for Group 2 is 2. The result of this study showed that samples in Group 1 leaked more than those in Group 2. This finding was significant(P<0.001).

• 한국대기환경학회지
• /
• 제25권5호
• /
• pp.382-391
• /
• 2009

The aim of the study was to assess the levels in typical central borough of phthalate exposure by monitoring children's facilities (19 kindergartens and 21 elementary schools) and households (17 old apartments and 22 new apartments) via sampling indoor floor dust. A vacuum cleaner specifically prepared for sampling dust was attached to a filter of a vacuum cleaner dust collecting container. During the sample preparation process, containers made of glass were used and analysis was performed using GC-MSD. The mean concentration of DEHP was $412{\mu}g/g$, DnBP was $24{\mu}g/g$, and BBzP was $10{\mu}g/g$ dust. The indoor characteristics including floor, wall materials, years after construction, water leakage history for the past three years, and ventilation were also examined to categorize phthalate esters from the dust samples. From the flooring and wallpaper materials of kindergartens and elementary schools, DEHP in the dust sample appeared at a statistically significant level (p<0.05) when PVC materials were present. DEHP in the indoor dust also increased significantly (p<0.01) during the construction period. The daily intake of DEHP measured from indoor dust was 0.08~$19.7{\mu}g/kg/day$ for children and 0.02~$1.1{\mu}g/kg/day$ for adults (women). The results clearly revealed that phthalate exposure is greater in children than in adults (women) due to the indoor dust.

• Composites Research
• /
• 제13권1호
• /
• pp.78-88
• /
• 2000

하이브리드 복합재료는 구조용으로 개발되어 여러 분야에서 응용되고 있으며, 특히 항공산업, 우주산업, 스포츠레저산업, 자동차산업 등에서 그 응용 분야를 확대하고 있다. 섬유 보강 고분자 복합재료는 비강도, 비강성이 높으며, 물리 화학적 성질, 동적 특성, 트라이볼로지 특성 등이 우수하여 고부가가치를 가지는 부품이나 성형물을 생산할 수 있다. 이러한 하이브리드 복합재료는 치차, 베어링, 캠, 씨일 등의 마찰부품으로도 사용가능성이 매우 높으며, 하이브리드 복합재료의 구조를 적절히 설계함으로써 일정한 하중에 견디며, 마찰마모특성이 뛰어난 바이오미메틱 재료로서 사용될 수 있다. 복합재료의 마찰 및 마모 특성을 규명하기 위하여 마찰 및 마모시험기를 설계하여 제작한 후 일방향 섬유복합재료의 마찰 및 마모 성질을 측정하였다. 탄소섬유, 아라미드섬유, 유리섬유 등이 포함된 일방향 복합재료의 트라이볼로지 특성을 규명하여 이를 바탕으로 최소마모율이 예상되는 하이브리드 복합재료의 구조를 제안하기 위하여 유리섬유복합재료, 탄소섬유 복합재료, 아라미드섬유 복합재료의 마찰 및 마모특성을 측정하였다. 그 결과 섬유복합재료의 마찰 및 마모성질은 섬유의 배향과 활주속도 및 보강섬유의 종류에 따라 변화함을 알았다. 각 시편에 대한 실험결과를 분석하여, 탄소섬유와 아라미드섬유가 하이브리드화 된 복합재료의 구조를 제안하고 그 시편을 제작하여 실험하였고 결과를 분석하였다.

• 한국식품저장유통학회지
• /
• 제12권3호
• /
• pp.292-298
• /
• 2005

발효식품 담금 용기로 사용되고 있는 유리, polypropylene(PP), polyethylene terephthalate(PET), 스테인레스 용기, 옹기에 고추장을 담아 $30^{\circ}C$에서 4개월 동안 발효하는 동안 물리적, 화학적, 미생물적인 품질변화를 측정하여 담금 용기의 효과를 비교 평가하였다. 높은 기공성을 가진 옹기는 다른 용기에 비해 전체 발효기간에서 높은 호기성 세균수, 젖산균수, 효모수를 보여서 가장 왕성한 발효진행을 보였으며, 이와함께 높은 protease 활성을 유지시키고, 아미노태 질소와 유리 아미노산을 생산하였다. 아울러 옹기에 담금 한 고추장에서는 높은 총산함량과 낮은 pH를 얻게 하였으며, 환원당도 많이 생성시켰다. 이러한 변화는 발효 $2{\sim}3$개월에 완성되어졌다. 하지만 높은 기공성에도 불구하고 옹기에서 발효된 고추장은 타용기구에 비해서 수분손실과 염도상승은 현저하지 않았는데, 이는 시간의 경과에 따라 옹기벽면에서의 기공이 고추장 성분에 의하여 일부 닫혀짐에 의한 것으로 해석된다. 이러한 성분변화의 결과로 인하여 옹기에서 발효된 고추장은 관능적인 품질에서 타 용기처리구에 비해 유의적으로 우수하였다.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.114-120
• /
• 2006

Nano-size Au particle doped $TiO_2$ films were prepared with $Ti(OC_3H_7^i)_4$, polyvinylpyrrolidone(PVP), $HAuCl_4$ and $C_3H_7OH$ etc. by sol-gel method. $TiO_2$ gel films were obtained by the dip-coating method on the $SiO_2$ glass substrates, and then heat-treated at $700^{\circ}C$ for 10 min. The thickness of $TiO_2$ films were $0.7\~1.8\;{\mu}m$. It was found that the thickness of films prepared from PVP containing solution was about $2\~8$ times higher values than that of thin films without PVP. The size of Au particles doped in the films were about $350\~750\;nm$. Nano-size Au particle dispersed $TiO_2$ films showed high absorption peak at visible region 450nm, which made them good candidates for non-linear optical materials and photo-catalytic materials. The contact angle of $TiO_2$ film for water was $12.5^{\circ}$, and therefore it is clear that $TiO_2$ films have very high hydrophilic properties and the self-cleaning effects.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.133-138
• /
• 1982

Two kinds of clinker liquid melts, one containing 2.0% of $K_2O$ and the other without $K_2O$, were prepared with the similar composition as those developed during the firing of portland cement clinker. One portion of melt was quenched and found to consist of glass together with traces of proto-$C_3A$, and the other portion was allowed to cool spontaneously to crystallize $C_3A$ and calciumferrite well. The product obtained by crystallization of the melt without $K_2O$showed cubic $C_3A$, while orthorhombic $C_3A$ was formed from the crystallized product containing $K_2O$. Studies on the hydration behavior of the samples made from the melts with 30% of gypsum were carried out for 24 hours by observation at regular intervals ettringite, monosulphate hydrates and gypsum which were formed or consumed during hydration. The samples without $K_2O$ in the melts were hydrated wth addition of proper amount of $K_2SO_4$ in the water for hydration. Hydration behavior of glassified $C_3A$ showed that it has low reactivity relative to crystallized $C_3A$, and also hydration reactivity of orthorhombic $C_3A$ was much lower than that of cubic $C_3A$ in 60 minutes. Potassium sulphate in the solution reduced the hydration reactivity of $C_3A$ . Evolution peaks of hydration heat examined by twin-type conduction micro-calorimeter showed that glassified $C_3A$ without $K_2O$ had secondary peak after 9 hours and $C_3A$ containing $K_2O$ after 12 hours. When crystallized $C_3A$ was hydrated, initial peaks of hydration heat were considerably high and there was no secondary peak for cubic $C_3A$ but the secondary peak of orthorhombic $C_3A$ appeared after 4 hours.

• 전기화학회지
• /
• 제3권1호
• /
• pp.57-62
• /
• 2000

이온 교환막의 고정이온 농도변화에 따른 막 특성을 알아보기 위해 matrix인 PSF (polysulfone)과 술폰화제인 CSA(chlorosulfuric acid)의 몰 비를 달리하여 SPSF (sulfonated polysulfone) 양이온 교환수지를 합성하였다. 합성된 SPSF의 이온교환용량, 함수율, 고정이온 농도, 분배계수 등을 측정하였다. DSC, TGA분석으로부터 SPSF의 술폰산기 농도 증가에 따라 벌키한 술폰산기의 도입으로 인하여 유리전이 온도는 증가하고 중량 감소비는 감소하는 것으로 나타났다. 본 실험조건에서는 SPSF막의 구조가 SEM, AFM등의 분석을 통하여 비대칭인 것으로 나타났다. 교류 임피던스로부터 측정한 SPSF 막을 통한 $Na^+$ 이온의 겉보기 확산계수는 술폰산기 농도 증가에 따라 증가하였다.

• 공업화학
• /
• 제2권4호
• /
• pp.340-347
• /
• 1991

3, 3', 4, 4'-Benzophenonetetracarboxylic dianhydride(BTDA)와 방향족 디아인민 4, 4'-oxydianiline(ODA) 및 amine terminated polydimethyl siloxane(PDMS)을 이용하여 homopolyimide(HPI)와 siloxane 함유 polyimide(SPI)를 합성하였다. 제 1 단계 반응생성물인 homopolyamic acid(HPAA)는 극성용매인 N-methylpyrrolidone(NMP)을 이용하여 얻었다. 제 1 단계에서 얻은 HPAA와 tetrahydrofuran(THF)에 녹인 세 종류의 PDMS(분자량 $M_n=1700g/mol$, 4000g/mol, 7000g/mol)를 30wt%로 반응시켜 siloxane-copolyamic acid (SPAA)를 얻은 후 이를 thermal curing하여 SPI를 얻었다. SPI및 HPI의 precursor인 SPAA와 HPAA의 inherent viscosity는 0.35~0.48dl/g이었다. 함수율은 SPI는최저 0.998%, HPI는 최저 1.88%정도였다. BTDA/MDA/siloxane계의 유리전이온도는 $258^{\circ}C-267^{\circ}C$이었다. 열중량 분석 결과 BTDA/ODA/siloxane계의 경우가 BTDA/MDA/siloxane계보다 다소 높은 분해 온도를 갖는 것으로 나타났다.

• 공업화학
• /
• 제20권4호
• /
• pp.459-463
• /
• 2009

본 논문에서는 poly(vinyl acetate-co-ethylene) (VAE) 에멀젼에 가소제로 많이 사용되는 di-butyl phthalate (DBP)를 혼합하여 가소제 함량에 따른 물성 변화를 고찰하였다. 시차주사열량계(Differential Scanning Calorimeter) 측정으로부터 건조한 필름의 유리전이온도($T_g$)를 측정한 결과,가소제 함량의 증가에 따라, $T_g$는 감소하는 경향을 나타내었고 반면에 에멀젼의 점도는 가소제 함량의 증가와 더불어 증가하였다. 이러한 결과는 건조한 필름상태에서 가소제는 고분자사슬의 상호작용을 방해하여 $T_g$를 감소시키며 에멀젼 상에서는 가소제가 에멀젼 입자 내로 침투하여 swelling시킴으로써 입자크기가 증가하고 점도를 상승키는 것으로 나타났다. 기계적 물성은 가소제의 함량이 증가할수록 저하되었으나 내수성은 증가되는 결과를 얻었다.