• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.429-437
• /
• 2010

The aim of this study was to evaluate the fluoride release and microhardness of Beautifil II as giomer(Group I), F2000 Compomer as compomer(Group II), GC Fuji II LC Capsule as resin-modified glass ionomer(Group III) and $Filtek^{TM}$ Z350 as composite resin(Group IV) according to time. Forty discs(5 mm diameter and 2 mm height) were prepared for each material. Each disc was immersed in 3 ml of de-ionized water within polyethylene tube and stored at $37^{\circ}C$. Evaluations were performed by pH/ISE meter for analysis of fluoride release and hardness testing machine for analysis of microhardness over 31 days. The results can be summarized as follows : 1. For all groups except group IV, the greatest fluoride release was observed after the first day of the study period and then dramatically diminished over time. On the 7th day of the study period, fluoride release level was stabilized. 2. Group III showed the highest fluoride release among test groups and then group II, group I were followed. Significant difference in cumulative fluoride release over 31 days was found between each groups. Group IV showed no fluoride release during study period. 3. Group IV showed the highest microhardness among test groups and then group I, group II, group III were followed. Significant difference in microhardness was found between each group, except between group I and group II. 4. After 31 days, microhardness was slightly diminished in every group. However, no significant difference was found.

• Journal of Food Hygiene and Safety
• /
• v.16 no.2
• /
• pp.145-151
• /
• 2001

EpoxidiBed soy bean oil (ESBO) is a plasticizer of PVC which is being widely used as a gaskets for the lid of glass jars including baby food. Using reverse mutation assay, chromosome aberration test and micronucleus test, ESBO were evaluated the mutagenicity. In the reverse mutation test, ESBO did not induced mutagenicity in Salmonella typhimurium TA98, TA100, TA1535, TA1537, TA102 with and without metabolic activation. In the chromosome aberration test using CHL cells, the results showed no increased structural and numerical aberrations in the concentration of sample producing cytotoxicity with and without metabolic activation. The in vivo induction of micronuclei was measured in polychromatic erythrocytes of bone marrow of young (3weeks old) and adult (6 weeks old) ddY mice of both sex. At 24 hours after treatment with ESBO 20, 10, 5, 2.5 g/B.W. kg/corn oil 10 ml by oral route animals were sacrificed and bone marrow cells were prepared for smear slides. The results showed no increased micronucleated polychromatic erythrocytes regardless of sex and age. It was concluded that water soluble ESBO did not show certain genotoxicity within our studies conducted.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.243-247
• /
• 2003

To examine ideal leaf types with higher $\textrm{CO}_2$ assimilates and different seed sizes, 12 soybean varieties were planted on the pot in a plastic house covered with glass. Leaf function based on stomatal conductance and $\textrm{CO}_2$ assimilation in soybean is different in seed size and leaflet shape. Mean $\textrm{CO}_2$ assimilation of a single leaf was 19.66 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$ and showed higher in small seed cultivars with narrow leaflet than that of small seeds with wide leaflet (18.29 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$), but within large seed groups, it was higher in wide leaflets (19.17 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$) than narrow leaflet cultivars (17.45 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$). In small seed and narrow leaflet cultivars, stomatal conductance ranged from 0.14 to 0.15 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$, while $\textrm{CO}_2$ assimilation ranged from 19 to 20 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$. The Photosynthetic rate was closely related to stomatal conductance, transpiration and water use efficiency.

• The Korean Journal of Physiology
• /
• v.14 no.1
• /
• pp.1-5
• /
• 1980

This study was under taken to investigate the influences of predictable or unpredictable stress upon gastric ulceration, and the hippocampectomy upon the ulceration order the stressful conditions. Sixty male albino rats(Sprague-Dawley strain) were divided equally into 3 groups: One was the hippocampal group(N=20) which received hippocampal ablation by suction, another was the cortical control group(N =20) which received partial cortical ablation over the hippocampus, and a third was the normal control group(N=20). Each group was further divided into two subgroups: One was the predicted subgroup(N=10) in which animals could predict the imminent stressful stimuli by hearing a sound(1,000 Hz, 2 sec in duration) 3 sec before the onset of the stress, and the other was the unpredicted subgroup(N=10). After starvation for 24 hours, but water ad libitum, each rat received the electric stimulation(3 mA, 60 Hz, 2 sec in duration, and once per minute in average) for 6 hours via a pair of electrodes attached on the tale. The electric stimulation served as the stress causing the gastric ulcer. Five hours after completion of stimulation, the stomach filled with the physiological saline was removed under deep anesthesia and spread out on a small glass plate. The numbers of the ulcer in each stomach were counted and the shape was examined under the dissecting microscope. Results obtained were as follows: 1. The mean numbers of the ulcer of the predicted subgroups were significantly larger than those of the unpredicted subgroups in the normal control and the cortical control groups, but there was no difference between the values of the two subgroups in the hippocampal group. 2. The mean numbers of the ulcer of the predicted subgroups in the normal control and the cortical control groups were larger(but not significant) than that in the hippocampal group. It is inferred from the above results that the prediction of the stress strengthens the effect of the stress on the gastric ulceration, and the hippocampus facilitates the effect of the prediction of the stress.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.467-483
• /
• 2017

In this study, the degradation properties by temperature stress of $Araldite^{(R)}$ rapid-curing epoxy resin used for inorganic cultural heritages, was identified. The tensile and tensile shear strength of durability decreased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$. In terms of stability of external stress and temperature, the slow-curing epoxy was superior to the rapid-curing epoxy, and cultural heritage conservation plans should therefore consider the strength and stress properties of restoration materials. Color differences increased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$, and glossiness decreased. Both color and gloss stability were weak, which necessitates the improvement of optical properties. Thermal properties (weight loss, decomposition temperature, and glass transition temperature) of adhesives are linked to mechanical properties. Interfacial properties of the adherend and water vapor transmission rates of adhesives are linked to performance variation. For porous media (ceramics, brick, and stone), isothermal and isohumid environments are important. For outdoor artifacts on display in museums, changes in physical properties by exposure to varying environmental conditions need to be minimized. These results can be used as baseline data in the study of the degradation velocity and lifetime prediction of rapid-curing epoxy resin for the restoration of cultural heritages.

• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.273-285
• /
• 2004

The mechanical properties of the Cretaceous tuff distributed in the Goheung area were measured in the laboratory. Tuff (Goehung tuff and Palyeongsan welded tuff) in the study area is classified into vitric tuff with regard to its composition. The specific gravity, the dry density, the water content, the porosity and absorption ratio in tuffs of the study area are 2.51, $2.52(g/cm^2)$, 0.12($\%$), 4.51($\%$) and 1.91($\%$) in means, respectively. In the tuffs, dry densities are in inverse Proportion to Porosities, and absorption ratios are highly proportional with Porosities. The uniaxial compressive strengths(UCS) in the tuffs ranges from 80.4 to 208(MPa) and the average of the strength is 141.1(MPa). According to the engineering classification of intact rock (Deere & Miller, 1966), the tuffs are assigned to the high strength rocks. The point load strength index ($Is_a$) in axial test is 4.2(MPa) on the average, and the point load strength index ($Is_d$) in diametral test is 2.2(MPa) in mean, and the point load strength anisotrophic index($Ia_{(50)}$) by the ratio of $Is_a$ to $Is_d$ is 1.93. There is close linear correlation between the uniaxial compressive strength and point load strength index, and the equation representing the correlation is postulated as follows : UCS = 22 $Is_{(50)}$ +49 (MPa) (r=0.95). It is considered that this equation is a useful tool to estimate UCS for tuff in Goheung area.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.141-147
• /
• 2008

This study was aimed to develop an instrument for real-time measurement of fluid conductance and to investigate the hydrodynamics of dentinal fluid. The instrument consisted of three parts; (1) a glass capillary and a photo sensor for detection of fluid movement, (2) a servo-motor, a lead screw and a ball nut for tracking of fluid movement, (3) a rotary encoder and software for data processing. To observe the blocking effect of dentinal fluid movement, oxalate gel and self-etch adhesive agent were used. BisBlock (Bisco) and Clearfil SE Bond (Kuraray) were applied to the occlusal dentin surface of extracted human teeth. Using this new device, the fluid movement was measured and compared between before and after each agent was applied. The instrument was able to measure dentinal fluid movement with a high resolution (0.196 nL) and the flow occurred with a rate of 0.84 to 15.2 nL/s before treatment. After BisBlock or Clearfil SE Bond was used, the fluid movement was decreased by 39.8 to 89.6%.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.380-392
• /
• 2012

Four kinds of N,O-hydroxypropyl chitosans (HPCTOs) with degree of substitution(DS) and molar substitution (MS) ranging from 2.47 to 2.52 and 4.9 to 7.8, respectively were synthesized, and their molecular chracteristics and thermotropic and lyotropic liquid crystalline properties were investigated. MS was exceedingly larger than DS, showing that in the later stages of reaction, propylene oxide was preferentially added to the side chains rather than the main chain. All the derivatives formed thermotropic cholesteric phases. The glass and clearing temperatures were decreased with increasing MS. The optical pitches (${\lambda}_m$'s) of the thermotropic cholesteric phases increased with temperature. However, the ${\lambda}_m$'s of the derivatives at the same temperature increased with increasing MS. Solutions of HPCTOs in water, methanol, ethanol, acetic acid, and formic acid containing more than 30 wt% polymer also formed cholesteic phases whose ${\lambda}_m$'s decreased exponentially with increasing polymer concentration. The concentration dependence of ${\lambda}_m$ of HPCTO solutions, however, highly depended on the nature of the solvent and MS. The thermotropic and lyotropic mesophase properties of HPCTOs were significantly different from those reported for hydroxypropyl celluloses. The results indicate that the secondary amino group in the C-2 position plays an important role on the formation, stabilization, and temperature and concentration dependencies of ${\lambda}_m$ of the cholesteric mesophase.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.375-380
• /
• 1999

This study was conducted to develop an intrauterine inseminator (IUI) to deposit of frozen semen into uterus and to evaluate the results obtained after artificial insemination by IUI. Two Japanese spitzs (2 to 4 years of age) were used as semen donors. Semen was collected by manual masturbation into sterile glass collection tubes and separated into 3 fractions with only the sperm-rich fractions retained for further examination. Sperm motility >70%, sperm concentration of 200 to $400{\times}10^6 cells/ml$$\times$g for 5 min and poured out the suspended solution, and then diluted with 2 ml Tris-buffer which was consisted of 2.4 g Tris, 1.4 g citric acid, 0.8 g glucose, 0.1 $\mu\textrm{g}$/ml streptomycin, 100 IU/ml penicillin, 20 ml egg yolk to 100 ml mili-Q water (Ext I) or supplemented with 8 ml glycerol and 1 ml Equex STM paste to 100 rnl (Ext II). The diluted semen was cooled to 5$^{\circ}C$ in cold room, where the temperature in the sample reached 5$^{\circ}C$. Two h after beginning the cooling procedure, 2 ml of Ext II, also at 5$^{\circ}C$, was added and mixed by gently reversing the tubes several times during 1 h. The final sperm concentration for freezing was approximately $50{\times}10^6 cells/ml$. After equilibration, the semen was loaded into 0.5 ml straw and frozen on the liquid nitrogen vapour in styrofoam box. The straws were thawed at 7$0^{\circ}C$ for precisely 6 sec. After thawing of each straw, the frozen semen can survived over 50% motility. All the females were inseminated twice with 1 ml of $25{\times}10^6 cells/ml$

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.589-594
• /
• 2006

The recycling of industrial wastes in the concrete manufacturing is of increasing interest worldwide, due to the high environmental impact of the cement and concrete industries and to the rising demand of infrastructures, both in industrialized and developing countries. The production of municipal wastes in the South Korea is estimated at about 49,902 ton per day and only 14.5% of these are incinerated and principally disposed of in landfill. These quantities will increase considerably with the growth of municipal waste production, the progressive closing of landfill, so the disposal of municipal solid waste incinerator(MSWI) ashes has become a continuous and significant issue facing society, both environmentally and economically. MSWI ash is the residue from waste combustion processes at temperature between $850^{\circ}C\;and\;1,000^{\circ}C$. And the main components of MSWI ash are $SiO_2,\;CaO\;and\;Al_2O_3$. The aim of this study is to find a way to useful application of MSWI ash(after treatment) as a structural material and to investigates the hydraulic activity, compressive strength development composition variation of such alkali-activated MSWI ashes concrete. And it was found that early cement hydration, followed by the breakdown and dissolving of the MSWI-ashes, enhanced the formation of calcium silicate hydrates(C-S-H). The XRD and SEM-EDS results indicate that, both the hydration degree and strength development are closely connected with a curing condition and a alkali-activator. Compressive strengths with values in the 40.5 MPa were obtained after curing the activated MSWI ashes with NaOH+water glass at $90^{\circ}C$.