• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.3
• /
• pp.45-54
• /
• 2012

This study intended to analyze growth condition of each object by protected tree's ground for 45 places registered to Pyeongtaek protected tree list in locational characteristics, conduct exchange analysis for impediment extent rate in crown area and tree type to the result and suggest the measures to manage artificial impediment which is an effect on protected tree condition. In this study, the tree whose area of impediment for crown area is less than 21% is tree condition of grade 1~2, less than 21~50% is grade 2~3 and more than 50% is grade 3~5. The more impediment is, the more inconvenience causes on growth and development. So, it verified that the area rate must maintain less than 21% for the root system management of protected tree. For the standard of managing artificial impediment which is an effect on the tree condition of protected trees, the below matters intend to be suggested. The first, the impediment in crown area should be less than 21%. But, if there is not artificial impediment out of crown area, the rate of impediment area is considered to increase somewhat. The second, growth space of protected tree should be maintained by crown area at least and impediment should be established out of the crown area. The third, during the national project and land development, surroundings of protected tree must be applied as park, resting place, etc. and the establishment area of impediment (artificial impediment and natural impediment) in crown area must be limited. The forth, publicity for regional people (especially, land owner) is necessary for the protection of natural inheritance and the value of dependence on local government and village which are the subject of management must be announced widely through the internet media, etc, so its importance must be recognized. The fifth, the matters related to protected tree management must be able to limit artificial damage which is for surroundings of protected tree through the mutual connection among the local governments; construction, civil engineering, architecture, water and sewage, agriculture and forest and others. Also, following studies on the effects of kinds, thickness, etc. of impediment around the protected tree on trees should be continued.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.438-444
• /
• 2018

Korea has recently selected twenty-two ports for reinforcement breakwater installation of protection facilities, due to rise sea level caused by global warming and increase in the number of typhoon and tsunami. In addition, due to consistent enlargement of ship size, dredging for depth of water for large vessel's berthing and enlargement of berth is under construction. However, no definite construction plan for the reinforcement and lengthening of crown height, which has close relationship with the safe mooring of ships. In this study, domestic and foreign design criteria of crown height were analyzed, and the crown height evaluation index and evaluation method were developed by dividing it into environment and ship elements. In particular, in the case of ship evaluation index, each step was set up in 4 steps according to domestic and foreign regulations, weighted by each step, and the safety level of crown height was evaluated. As a result of the mooring safety simulation of the 100,000 ton cruise ship, the appropriate minimum crown height standard was derived to be 3 m above A.H.H.W. The results of this study are expected to be used as basic data to propose the crown height standard reflecting ship characteristics.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.385-393
• /
• 2022

The study was carried out in Pocheon-si, Gyeonggi-do from March to December in 2019 to compare and analyze the water use strategies of two co-occurring tree species, Pinus densiflora and Quercus serrata, both native and dominant in Korea's forest ecosystems. Through seasonal changes, we measured environmental variables such as air temperature, relative humidity, precipitation, net radiation, and soil water content. Sap flow densities of P. densiflora (n = 6) and Q. serrata (n = 3) were measured, along with environmental variables. The maximum sa pflow density for Q. serrata almost doubled that of P. densiflora during the growing season, while the maximum sap flow densities in both Q. serrata and P. densiflora peaked in September and August, respectively. Net radiation and vapor pressure deficit, but not air temperature, were the major environmental variables significantly affecting sap flow density. Analysis of hysteresis revealed that P. densiflora exhibited isohydric behavior, while Q. serrata showed anisohydric behavior. Analysis of crown conductance revealed similar trends as sap flow density, i.e., the crown conductance of Q. serrata was twice that of P. densiflora during the growing period. The study compared and analyzed the water use strategies between two co-occurring species. To better understand the underlying mechanisms of water use, more research on both physiological and morphological traits are needed.

• Journal of the Korean Chemical Society
• /
• v.41 no.7
• /
• pp.337-342
• /
• 1997

Acryloylmethylbenzo-15-crown-5 was prepared from the reaction of 4'-hydroxymethylbenzo-15-crown-5 with acryloyl chloride. And, poly(acryloylmethylbenzo-15-crown-5) [poly(AMB15C5)] was synthesized by radical polymerization using AIBN as initiator in benzene. Coated wire lead(II) ion-selective electrodes ($Pb^{2+}$-CWISEs) using either poly(AMB15C5) or B15C5 as neutral carrier were prepared, respectively. $Pb^{2+}$-CWISEs gave linear responses with slopes of 28$\pm$ 1mV per decade within the concentration range of $10^{-5} M{\sim}10^{-1}$ M, respectively. Also, the detection limits were $10^{-6}$ M and response times were either 3 or 5 min. for B15C5 and poly(AMB15C5), respectively. $Pb^{2+}$-CWISE base on B15C5 was rather unstable than poly(AMB15C5)'s due to solubility of the B15C5 in water. The selectivity coefficients of a variety of interfering ions such as $Mg^{2+},\; Ca^{2+},\; Co^{2+},\; Ni^{2+},\; Cu^{2+},\; Zn^{2+}$ and $Cd^{2+}$ were small ($10^{-4}{\sim}10^{-5}$), while those of $Na^+$ and $K^+$ were large (0.1∼0.01). In addition, the electrode responses depended upon the pH of test solution and the composition of the membrane. In the range pH 3∼6 of test solution, potentials of Pb2+-CWISEs were hardly changed. The optimal contents of B15C5 and poly(AMB15C5) were 7.7 wt% and 13.1 wt%, respectively.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.751-755
• /
• 2011

A doubly tethered chiral stationary phase (CSP) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was applied to the resolution of various aryl ${\alpha}$-aminoalkyl ketones with the use of 80% ethanol in water containing 10 mM sulfuric acid as a mobile phase. The chiral resolution was quite successful, the separation factors (${\alpha}$) and the resolutions ($R_S$) being in the range of 1.39-2.05 and 3.18-5.22, respectively. The separation factors (${\alpha}$) on the doubly tethered CSP were slightly worse than those on the corresponding singly tethered CSP. However, the resolutions ($R_S$) on the doubly tethered CSP were generally greater than those on the corresponding singly tethered CSP. The chromatographic behaviors for the resolution of aryl ${\alpha}$-aminoalkyl ketones on the doubly tethered CSP were demonstrated to be dependent on the type and the content of the organic and acidic modifiers in aqueous mobile phase and the column temperature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.196-204
• /
• 1998

For the experimental measurement of instantaneous surface temperature of the piston of the DI mono cylinder diesel engine, the instantaneous temperature proves, data acquisition system, and grass-hopper type linkage system were developed. The instantaneous temperatures on the piston bowl, crown, lands and skirt were measured and analyzed, and the following conclusions were derived ; (i) The crank angle for the maximum instantaneous temperature during one cycle varies and moves back and forth by the measuring positions and engine speeds. (ii) The engine speeds, the positions of the measuring points and the cooling water temperature had an effect on the instantaneous temperature amplitude. (iii) The instantaneous temperature suing phenomena appeared on the temperature profiles of the piston crown, top and second land of ring, but on the temperature profiles of the parts of the third land of the fing and skirt, they didn't appear, (iv) The isothermal lines in the piston were acquired through the operation of the finite elements method using the measured temperatures as the boundary conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.115-124
• /
• 2003

In this study, the relationships between the displacement and stress of the tunnel using various analysis methods were compared with monitoring results carried out during construction and maintenance monitoring. The behavior of tunnel were measured in the subway tunnel passing comparative soft the weathering and analyzed both security and mechanical characteristics of the tunnel lining. With the results of simplified monitoring observed in top heading and bench excavation tunnel, it is confirmed that the crown settlement is larger than the surface settlement. it is interesting to note that the crown settlement and the crown shotcrete lining stress are widely used monitoring items for the back analysis. It is analyzed that the residual water pressure applied in the drainage type tunnel is reasonable.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.15-19
• /
• 1990

The crystal structure of $(C_{12}H_{24}O_6{\cdot}K)_2K[Co(OH)_6Mo_6O_{18}]{\cdot}12H_2O$ has been determined by X-ray diffraction. Crystal data as follows ; monoclinic, space group $C_2/m,\;a\;=\;22.512(4)\;{\AA},\;b\;=\;18.304(4)\;{\AA},\;c\;=\;7.641(1)\;{\AA},\;{\beta}\;=\;90.52(2)\;{\AA}$, and Z = 2. A final conventional R value of 0.044 was obtained by least-squares refinement of 4173 independent observed $[{\mid}Fo{\mid}{\geq}3{\sigma}({\mid}Fo{\mid})]$ reflections. The $[Co(OH)_6Mo_6O_}{18}]^{-3}$ polyanion shows the well-known Anderson-structure and has approximate 3m symmetry. A $[Co(OH)_6Mo_6O_{18}]^{-3}$ polyanion is located between two crown ether complexed cations forming a sandwich structure. One potassium ion interacts with the crown ether via electrostatic interactions. The other potassium ion only interacts with the water molecules and terminal oxygen atoms of the polyanion.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.139-147
• /
• 2022

Background: Temporary crown resins are used prior to prosthesis placement, indicating the importance of aesthetics. The aim of this study was evaluate the color stability of various staining solutions according to the color of temporary crown resins using VITA Easyshade^Ⓡ V. Methods: The temporary crowns used were the powder-liquid type and included four shades. A total of 36 specimens were fabricated in the form of disks with a diameter of 1.8 mm and a depth of 2 mm. They were divided into four groups of nine each, and staining was performed for seven days by precipitation in 3 mL of three staining solutions composed of distilled water, black coffee, and red wine. Color and color stability evaluations were performed by a trained examiner using a digital spectrophotometer (VITA Easyshade^Ⓡ V). Color stability was analyzed using the ΔE value. Results: Because of the color stability evaluation using the ΔE value, the difference between three and seven days was significant in the specimen I and III groups (p<0.05). Further, post hoc analysis showed that the ΔE value of red wine was significant, indicating that the color stability in red wine was low. The ΔE values in group II between days three and seven were statistically significant (p<0.05). Post hoc analysis showed that distilled water, coffee, and wine had the highest ΔE values on day three. On day seven, the ΔE value for wine was significant, and the color stability was low. There was no significant difference in group IV according to the staining period and staining solution; therefore, color stability was high (p>0.05). Conclusion: This study showed that most temporary resin restorations exhibited color stability in the staining solution. The darker the color of the temporary resin restoration, the higher the color stability against extrinsic staining.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.623-631
• /
• 2003

A large scale hydrological laboratory model tests for the geotextile tube were conducted to investigate the stability of geotextile tube and the capability of breakwater with variations of significant wave height, percentage of soil filling, and the water level above geotextile tube. The sliding displacement of geotextile tube is measured to check the stability of geotextile tube for given the various significant wane heights. The marked mash was laid out at the bottom of water channel to measure the displacement of geotextile tube. The bench mark was furnished in the upper part of water channel and the initial location was marked every 10cm interval to measure the displacement of geotextile tube. The wane transmit ratios are analyzed with the variations of soil filling of tube and of the top crown height wave above the geotextile tube in order to study the performance of brekwater before and after the installation of geotextile tube.