• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.205-208
• /
• 2006

Damage of hydraulic concrete structures by the abrasion and erosion process is very severe and it indicates that the necessity of considering the influence of this process while designing concrete mixtures. Abrasion wear of concrete in hydraulic structures is caused by the movement of particles, water-borne debris. The resistance against erosion for high-strength self-consolidating concrete(SCC) was examined in this paper. A newly designed testing method is presented in order to quantitatively estimate the erosion of concrete. It was shown that loss of volume in abraded concrete can be explained as function of material parameters such as the amount of fly ash and blast furnace slag. Those admixtures have been widely used to reduce heat of hydration and improve resistance against sulfate attack. The results of current study can be used as a guideline in selecting the composition of concrete exposed to abrasion-wear.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.1
• /
• pp.101-107
• /
• 1995

Staphylococcus aureus, the most salt-tolerant food-borne pathogen, produces enterotoxins which may cause symptoms such as vomiting, diarrhea, nausea, and cramps. Since this bacterium has been able to grow at extremely high osmolarity its identity in foods with low water activity values such as salted or dried foods is of great concern. In this study, the growth of S. aureus at high osmolarity has been studied and the doubling time of S. aureus grown at TSB medium containing 15% NaCl has been found to be increased to 4∼5 hours. The stimulation of proline uptake after exposure of cells to high concentration of both extracellular KCl and sucrose was not increased. Stimulation of proline uptake at these environment only occured when 25mM NaCl was present I transport buffer. In additional experiments, the time required to reach mid-logarithmic phase in defined medium of high osmolarity found to be reduce by the presence of glycine betaine, proline, and choline.

• Journal of fish pathology
• /
• v.26 no.1
• /
• pp.11-17
• /
• 2013

The cadmium (Cd) toxicological effects on the fertilized eggs, embryos and larvae were investigated in olive flounder, Paralichthys olivaceus water-borne exposed to Cd. The survival rate and hatching success of the embryos significantly diminished in treated groups in dependence of the Cd concentration. Significant differences were found at ${\geq}30{\mu}g\;L^{-1}$ exposed groups compared to the control group. A significant increase of malformation of the embryo was observed at ${\geq}20{\mu}g\;L^{-1}$ exposed groups. They usually include such symptoms as clouded yolk-sac abnormality, fin erosion and spinal curvature. A significant reduction in the survival rate of the larvae was observed in ${\geq}20{\mu}g\;L^{-1}$ exposed groups with accompanied by the disorder. Notably, in larvae, a concentration as low as $10{\mu}g\;L^{-1}$ exposed groups caused significant elevated abnormalities that is incidences of spinal cord deformation, abnormal eyes, deformation of the head region and severe developmental delay.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.243-244
• /
• 2001

Vibrio choleae non-O1 has been reported to cause food borne gastroenteritis. This strain produces therm()stable direct hemolysin (NAG-rTDH) similar with that of Vibrio parahaemolyticus. As a result of rabbit ligated intestinal loop test, TDH caused fluid accumulation and is considered to be the major virulent factor. Hemolysis by TDH has been reported to cause colloid osmotic lysis of erythrocytes. (omitted)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.80-81
• /
• 2014

환경보호 정책에 대응하고 보건 및 안전의 수준 향상을 위한 수용성 도료의 적용 시, 일부 도장 공정에서 도막 건조의 지연으로 sagging 현상이 발생하였다. 이러한 sagging 현상이 일어난 원인을 실험을 통해 분석한 결과, 도료가 갖는 고유의 yield stress와 더불어 습도 및 통기 상태 등의 시공 환경이 지배적인 영향을 미친다고 파악되었다. Sagging 현상의 재발을 방지하기 위해서는 높은 sagging 저항성을 갖는 도료의 선정뿐만 아니라 도장 공장의 적절한 온/습도 및 환기 제어가 선행되어야 한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.371-377
• /
• 1999

In order to evaluate the antimicrobial function of natural herb extracts as antimicrobial agent or packaging material for the preservation of foods and greenhouse produce, the water extract of chopi (Zanthoxylum piperitum DC.) was prepared and its antimicobial activity was determined. In the paper disk test its antimicrobial activity was increased in proportion to its concentraion. The growth of microorganisms was completely inhibited above 500ppm of its concentration. It showed wide spectrum of thermal(40 to 180oC) and pH(4 to 10) stabilities. In the electronic microscopic observation(TEM and SEM) of microbial morphological change it showed to decrease the activation of physiological enzymes and to lose the function of cell membranes. Even in the activation test of galactosidase, it seemed to weaken the osmotic function of cell membranes remarkably in comparison with chloroform and its activation corresponded to 40~50% of toluene. Zanthoxylum piperitum DC. extract seemed to be an excellent antimicrobial for the inhibition of food borne microorganisms as well as the pre servation of greenhouse produces.

• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.239-244
• /
• 2007

Corrosion protection of automotive steels has traditionally been assured by using a zinc phosphate metal pretreatment followed by the deposition of a cathodic electrocoat system. This system has been developed and optimized over the years into a highly robust and dependable system with a high performance. However, in terms of efficiency and use of resources and energy, the need is now felt to develop a simpler system with fewer steps, shorter lines, less energy requirements (curing and e-coat deposition) and less stringent waste disposal requirement (phosphate sludge). We report here on the development of a one-step system that can possibly replace both the zinc phosphate and the e-coating processes. Such a system is based on the so-called superprimer concept that we have recently developed for the replacement of chromate pretreatment and chromate-containing primers in the aerospace industry. With some modifications, such systems can also be adapted for use in the automotive industry.

• 보존과학연구
• /
• s.11
• /
• pp.1-9
• /
• 1990

The environmental controls for good conservation of all textile materials are follow as :1) Special RH conditions on textiles keep to the usually advocated 50∼55%.2) The effect of the temperature is too small to worry about in the applicable range, that is $20^{\circ}C$.3) It is important to keep soiling by air borne dirt to a minimum by an air filter or putting textiles in cases.4) Sulphur dioxide must be rekoved by an activated carbon filter or a water spray. And this concentration below $50\muGm^3$ can be regarded assatisfactory.5) Oxygen plays a part of deterioration proceses. The effect of nitrogend andinert gases in sealed show cases should be further studied.6) Ozone is detrimental to textiles. It can be removed by activated carbonfilter.7) The removal of UV radiation and blue light can be expected to increase the lifetime of dyeing and strength of fiber.50 lux is suggested for sensitive textile materials.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.73-74
• /
• 2002

Active upwelling air motion in every summer over the Tibetan plateau is an essential process controlling activities of asian summer monsoon which affects water cycle and precipitation in eastern Asia. Large heating rate of surface air on the high plateau with average height of 4000m is considered to cause such large scale upwelling over the plateau. (omitted)

• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.323-329
• /
• 2016

In this study, the applicability of MBR process was evaluated to improve processing of personal sewage treatment facilities of $50m^3/day$ or less. As result of the research, stable discharge water quality could be secured as result of the MBR effector operation according to rate of inflow and inflow load and treatment efficiency of 98% or higher was shown by the membrane filtering method operation for SS, $BOD_5$. it was found that high treatment efficiency of 99% or higher. It is judged that detention time can be designed until 6.9 hr when applying MBR process on personal sewage treatment facilities with high pollution load and that cutback of pollution load can be possible through this study. It was shown that MBR process application reduces an annual cost of 4,829,600 won based on the basic unit calculation results and solves burden of amount of borne by causers according to excess of discharge water quality standards.